Commit graph

21602 commits

Author SHA1 Message Date
Tom Rini
9721027aae am335x_evm: am33xx_spl_board_init function and scale core frequency
Add a am33xx_spl_board_init (and enable the PMICs) that we may see,
depending on the board we are running on.  In all cases, we see if we
can rely on the efuse_sma register to tell us the maximum speed.  In the
case of Beaglebone White, we need to make sure we are on AC power, and
are on later than rev A1, and then we can ramp up to the PG1.0 maximum
of 720Mhz.  In the case of Beaglebone Black, we are either on PG2.0 that
supports 1GHz or PG2.1.  As PG2.0 may or may not have efuse_sma set, we
cannot rely on this probe.  In the case of the GP EVM, EVM SK and IDK we
need to rely on the efuse_sma if we are on PG2.1, and the defaults for
PG1.0/2.0.

Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20 16:57:35 -04:00
Tom Rini
5287946c06 am33xx: Add the efuse_sma CONTROL_MODULE register
Starting with PG2.1 we have a register in the CONTROL_MODULE that is set
with the package type and maximum supported frequency.  Add this, and
the relevant mask/values.

Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20 11:01:26 -04:00
Tom Rini
6a0d803c7c am33xx: Add am33xx_spl_board_init function, call
We need to allow for a further call-out in spl_board_init.  Call this
am33xx_spl_board_init and add a __weak version.  This function may be
used to scale the MPU frequency up, depending on board needs.

Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20 11:01:26 -04:00
Philip, Avinash
b04601a7f0 drivers/power/pmic: Add tps65910 driver
Add a driver for the TPS65910 PMIC that is found in the AM335x GP EVM,
AM335x EVM SK and others.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
[trini: Split and rework Avinash's changes into new drivers/power
framework]
Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20 11:01:26 -04:00
Greg Guyotte
8b65b12a04 drivers/power/pmic: Add tps65217 driver
Add a driver for the TPS65217 PMIC that is found in the Beaglebone
family of boards.

Signed-off-by: Greg Guyotte <gguyotte@ti.com>
[trini: Split and rework Greg's changes into new drivers/power
framework]
Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20 11:01:26 -04:00
Tom Rini
fd070d811d spl/Makefile: Add drivers/power/pmic/libpmic to CONFIG_SPL_POWER_SUPPORT
We may need to access the PMIC code in SPL, when we have power set.

Signed-off-by: Tom Rini <trini@ti.com>
2013-09-20 11:01:26 -04:00
Masahiro Yamada
82cecfce3f drivers: s3c44b0_rtc: delete an unused driver
Since commit 5dc5f36 removed B2 board support,
there are no boards enabling s3c44b0_rtc.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Andrea Scian <andrea.scian@dave-tech.it>
2013-09-19 09:52:08 +02:00
Masahiro Yamada
d964df322f drivers: serial_s3c44b0: delete an unused driver
Since commit 5dc5f36 removed B2 board support,
there are no boards enabling serial_s3c44b0.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Andrea Scian <andrea.scian@dave-tech.it>
2013-09-19 09:52:04 +02:00
Masahiro Yamada
a341f649d7 drivers: s3c44b0_i2c: delete an unused driver
Since commit 5dc5f36 removed B2 board support,
there are no boards enabling s3c44b0_i2c.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Andrea Scian <andrea.scian@dave-tech.it>
Acked-by: Heiko Schocher <hs@denx.de>
2013-09-19 09:51:52 +02:00
Masahiro Yamada
aeef2b090d ARM: s3c44b0: remove remainders of dead board
Because commit 5dc5f36 removed B2 board support,
arch/arm/cpu/s3c44b0/* and arch/arm/include/asm/arch-s3c44b0/*
are not necessary anymore.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Andrea Scian <andrea.scian@dave-tech.it>
2013-09-19 08:59:49 +02:00
Kuo-Jung Su
771f74c3d3 arm: dma_alloc_coherent: malloc() -> memalign()
Even though the MMU/D-cache is off, some DMA engines still
expect strict address alignment.

For example, the incoming Faraday FTMAC110 & FTGMAC100 ethernet
controllers expect the tx/rx descriptors should always be aligned
to 16-bytes boundary.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-09-14 12:08:00 +02:00
Masahiro Yamada
fb8d49cb44 arm: spl: Do not set the stack pointer twice
Because the stack pointer is already set in arch/arm/lib/crt0.S,
we do not need to set it in arch/arm/lib/spl.c.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-09-14 11:14:21 +02:00
Tom Rini
8386ca8bea Revert "standalone-examples: support custom GCC lib"
After further testing, this patch has two problems.  First,
examples/standalone/Makefile was already inherting PLATFORM_LIBS from
the top-level Makefile so this lead to duplicating the private libgcc.
Second, currently the private libgcc has a reference to 'hang' that is
not being fulfilled.

This reverts commit 4412db4646.

Signed-off-by: Tom Rini <trini@ti.com>
2013-09-12 10:27:29 -04:00
Albert ARIBAUD
27af930e9a Merge and reformat boards.cfg and MAINTAINERS
Put all informations about targets, including state (active or
orphan) and maintainers, in boards.cfg; remove MAINTAINERS;
adjust the build system accordingly.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-09-12 09:14:37 -04:00
Tom Rini
7bcee5f7ee Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-09-12 09:08:24 -04:00
Albert ARIBAUD
5480ac3217 Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Conflicts:
	tools/Makefile
2013-09-11 09:59:27 +02:00
Przemyslaw Marczak
5c18a1cf3e arm:goni:mmc: Add sd card detection and initialization.
This change allow to use sd card on Goni the same like mmc 0.
SD card is mmc dev 1, so it can be used like this: "fatls mmc 1:2".
SD card is inited even if eMMC initialization fails.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-09-11 11:09:27 +09:00
Przemyslaw Marczak
7324907082 arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.
On s5pc1xx mmc devices offset is multiply of 0x100000,
wrong value was 0x10000. Register offset always points
to mmc 0 before this change.

Add macro definition of mmc dev register offset to s5pc1xx and
exynos mmc.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung at samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-09-11 10:52:10 +09:00
Chander Kashyap
e2238328f7 dts: samsung: arndale: Fix include path
As per new convention ARCH_CPU_DTS is not defined in "dtc/Makefile".
Hence Arndale comilation is failing. Fix this by adding proper include
file in "board/samsung/dts/exynos5250-arndale.dts".

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-09-11 10:47:24 +09:00
Tom Rini
985a71d15b Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx 2013-09-09 09:59:30 -04:00
Tom Rini
89993dc34a Merge branch 'master' of git://git.denx.de/u-boot-i2c 2013-09-09 09:35:38 -04:00
Tang Yuantian
f62b123813 powerpc/mpc85xx: Fix the I2C bus speed error on p1022
The source clock frequency of I2C bus on p1022 is the platform(CCB)
clock, not CCB/2. The wrong source clock frequency leads to wrong
I2C bus speed setting. so, fixed it.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
2013-09-09 07:44:27 +02:00
Ying Zhang
81b867aa44 SPL: P1022DS: switch to new multibus/multiadapter support
- Added section "u_boot_list" in arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
- Use the function i2c_init_all instead of i2c_init

Signed-off-by: Ying Zhang <b40530@freescale.com>
2013-09-09 07:43:43 +02:00
Stefan Roese
9055f66c2d ppc4xx: Fix GPIO handling in lwmon5 and lcd4_lwmon5 BSP
LCD4 needs a slightly different GPIO configuration than the
original LWMON5 variant. GPIO49 needs to be configured to a
default output value of 0 (permanent voltage supply).

Additionally lcd4 also needs to enable the LSB transmitter.

Signed-off-by: Stefan Roese <sr@denx.de>
2013-09-07 09:48:06 +02:00
Tom Rini
47f75cf2e1 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-09-06 20:25:35 -04:00
Masahiro Yamada
1affd4d4a3 cam_enc_4xx: Move CONFIG_SPL_PAD_TO to a config header
For most boards which define CONFIG_SPL_PAD_TO,
it is defined in config header files.
Currently, there exists only one exception, cam_enc_4xx board.

This patch moves CONFIG_SPL_PAD_TO definition
from board/ait/cam_enc_4xx/config.mk
to include/configs/cam_enc_4xx.h.

With this modification, we can delete a glue code
in the top level config.mk:

ifneq ($(CONFIG_SPL_PAD_TO),)
CPPFLAGS += -DCONFIG_SPL_PAD_TO=$(CONFIG_SPL_PAD_TO)
endif

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>
2013-09-06 13:09:08 -04:00
Masahiro Yamada
cb4ef5ba36 config.mk: Delete unnecessary code
Currently no makefiles (board-specific config.mk)
set the following variables:

CONFIG_SPL_TEXT_BASE
CONFIG_UBOOT_PAD_TO
CONFIG_RESET_VECTOR_ADDRESS
CONFIG_TPL_PAD_TO

For all target boards using above macros
they are set in header files (include/configs/*.h),
so we do not need to set them as CPPFLAGS.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-09-06 13:09:08 -04:00
Oliver Metz
e387efbd65 fw_env: fix writing environment for mtd devices
Signed-off-by: Oliver Metz <oliver@freetz.org>
Tested-by: Luka Perkov <luka@openwrt.org>
2013-09-06 13:09:08 -04:00
Oliver Metz
23ef62d741 fw_env: add redundant env support for MTD_ABSENT
Signed-off-by: Oliver Metz <oliver@freetz.org>
Tested-by: Luka Perkov <luka@openwrt.org>
2013-09-06 13:09:08 -04:00
Marek Vasut
a82ca7bcd7 mail: Fix email address
Fix my email address.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
2013-09-06 13:09:07 -04:00
Henrik Nordström
4c267374a2 Always build u-boot.img when using CONFIG_SPL_FRAMEWORK
Use of uImage formatted u-boot have long been preferred, and recent
changes to better support Falcon mode on MMC now enforces it on MMC.

Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
2013-09-06 13:09:07 -04:00
Rob Herring
344ca0b40c ahci: convert to use libata functions and definitions
libata already has similar functions as implemented in the ahci code.
Refactor the code to use the libata variants and remove the dependency on
ata.h. Convert some defines to use the version from libata.h. Also, remove
some unnecessary memset's of bss data.

This is a step toward hopefully merging ahci.c and dw_ahsata.c which are
essentially the same driver.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06 13:09:07 -04:00
Rob Herring
7610b41ddf ahci: increase spin-up timeout to 20 sec
Based on Linux libata code, most drives are less than 10 sec, but some
need up to 20 sec.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06 13:09:07 -04:00
Rob Herring
178210847f ahci: handle COMINIT received during spin-up
Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes
the link to go down and we need to re-initialize the link.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-09-06 13:09:07 -04:00
Rob Herring
124e9fa132 ahci: move link bring-up handling to separate function
Move the link bring-up handling to a separate weak function in order to
allow platforms to override it. This is needed on highbank platform which
needs special phy handling.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-09-06 13:09:07 -04:00
Rob Herring
2bdb10dbf5 ahci: add defines for PORT_SCR_STAT register bits
Replace hard-coded register values with proper defines for PORT_SCR_STAT
register.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-09-06 13:09:07 -04:00
Rob Herring
796c2ebd6f ahci: fix memory leak in ata_scsiop_inquiry
This fixes a memory leak when scsi inquiry fails.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06 13:09:07 -04:00
Rob Herring
48c3a87c0a ahci: fix unaligned access
gcc 4.7 will generate unaligned accesses to local char arrays, so make
them static to avoid that.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06 13:09:07 -04:00
Richard Gibbs
2915a0223a ahci: use ports implemented map instead of num_ports
The AHCI driver was incorrectly using the Capabilities register NP (number
of ports) field to determine which ports to activate. This commit changes
it to correctly use the PORTS_IMPL register as a port map.

Signed-off-by: Richard Gibbs <richard.gibbs@calxeda.com>
Reviewed-by: Tom Rini <trini@ti.com>
2013-09-06 13:09:07 -04:00
Jack Mitchell
4412db4646 standalone-examples: support custom GCC lib
Add support for defining the gcc lib in standalone examples as is
done in the main u-boot Makefile

Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
2013-09-06 13:09:07 -04:00
Wu, Josh
6b8f185faf fs: fat: don't call disk_write with zero sector num
In the set_cluster() function, it will convert the buffer size to sector
numbers. Then call disk_write() to write by sector.
For remaining buffer, the size is less than a sector, call disk_write()
again to write them in one sector.

But if the total buffer size is less then one sector, the original code
will call disk_write() with zero sector number. It is unnecessary.
So this patch fix this. Now it will not call disk_write() if total buffer size
is less than one sector.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
2013-09-06 13:09:07 -04:00
Jeroen Hofstee
7ea50d5284 compiler_gcc: do not redefine __gnu_attributes
gcc allows extensions to be non compiler specific by defining
__* macros for the attributes supported by gcc. Having a
different definition causes many warnings during the build
(cdefs.h on FreeBSD uses __attribute((__pure__)) where u-boot
uses __attribute__((pure)) for example). Do not redefine
these macros to suppress these warnings.

This patch ignores the checkpatch warning:
WARNING: __packed is preferred over __attribute__((packed))

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2013-09-06 13:09:07 -04:00
Pantelis Antoniou
dc19ec11d7 git-mailrc: Update MMC custodian
Update git-mailrc with my nick and replace afleming as mmc custodian.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-09-06 13:09:07 -04:00
Tom Rini
938138c708 Merge branch 'master' of git://git.denx.de/u-boot-nios 2013-09-06 09:37:04 -04:00
Robert P. J. Day
3c950c4fca am335x_evm.h: Add back the actual load of the kernel image
Somewhere along the line of refactoring the am335x header files, the
kernel image load was lost, so put it back in.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2013-09-06 09:36:51 -04:00
Chin Liang See
68e1747f9c socfpga: Creating driver for Reset Manager
Consolidating reset code into reset_manager.c. Also
separating reset configuration for virtual target and
real hardware Cyclone V development kit

Signed-off-by: Chin Liang See <clsee@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2013-09-06 12:09:06 +02:00
Chin Liang See
31ad864e47 socfpga: Adding configuration for development kit
Separating the configuration file for Virtual
Target and real hardware Cyclone V development kit

Signed-off-by: Chin Liang See <clsee@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2013-09-06 12:06:24 +02:00
Thomas Chou
1a05b5f91e nios2: fix missing comment terminator from SPDX License commit
The commit 1a4596601f
  Add GPL-2.0+ SPDX-License-Identifier to source files

generated a warning due to a missing comment terminator.
  longlong.h:7:1: warning: "/*" within comment

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2013-09-06 11:03:42 +08:00
Michal Simek
fba1ed422e arm: lds: Remove libgcc eabi exception handling tables
Remove ARM eabi exception handling tables (for frame unwinding).
AFAICT, u-boot stubs away the frame unwiding routines, so the tables will
more or less just consume space. It should be OK to remove them.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-09-05 13:41:42 +02:00
Albert ARIBAUD
f0f102fde8 Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' 2013-09-05 12:04:49 +02:00