Commit graph

10187 commits

Author SHA1 Message Date
Mike Frysinger
bc1a884686 mtd: nand_plat: add simple GPIO framework DEV_READY option
Make it easy to use GPIOs for the DEV_READY pin by using the common GPIO
framework.  Also make the NAND_PLAT_INIT() define optional.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-07-08 16:52:12 -05:00
Florian Fainelli
1445f6ffd5 NAND: add Toshiba TC58NVG0 identifier
The Toshiba TC58NVG0* parts are 128Mbytes x 8 bits 3.3V parts with the 0xD1
identifier. Add these to the list of known devices IDs.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2010-07-08 16:49:50 -05:00
Florian Fainelli
3e9b349c7f NAND: show manufacturer and device ID for unknown chips
When the NAND part is not supported, it is useful to show the manufacturer
and device ID to help debugging and reporting.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2010-07-08 16:49:50 -05:00
Wolfgang Denk
54841ab50c Make sure that argv[] argument pointers are not modified.
The hush shell dynamically allocates (and re-allocates) memory for the
argument strings in the "char *argv[]" argument vector passed to
commands.  Any code that modifies these pointers will cause serious
corruption of the malloc data structures and crash U-Boot, so make
sure the compiler can check that no such modifications are being done
by changing the code into "char * const argv[]".

This modification is the result of debugging a strange crash caused
after adding a new command, which used the following argument
processing code which has been working perfectly fine in all Unix
systems since version 6 - but not so in U-Boot:

int main (int argc, char **argv)
{
	while (--argc > 0 && **++argv == '-') {
/* ====> */	while (*++*argv) {
			switch (**argv) {
			case 'd':
				debug++;
				break;
			...
			default:
				usage ();
			}
		}
	}
	...
}

The line marked "====>" will corrupt the malloc data structures and
usually cause U-Boot to crash when the next command gets executed by
the shell.  With the modification, the compiler will prevent this with
an
	error: increment of read-only location '*argv'

N.B.: The code above can be trivially rewritten like this:

	while (--argc > 0 && **++argv == '-') {
		char *arg = *argv;
		while (*++arg) {
			switch (*arg) {
			...

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-07-04 23:55:42 +02:00
Wolfgang Denk
b218ccb543 Redundant environment: move flag definitions to header file
Instead of defining the flags sevaral times in different source files
(which is error prone), move them to a central place in a header file.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-04 23:52:42 +02:00
Wolfgang Denk
d9c27253ce Make *printf() return "int" instead of "void"
Change the return type of the *printf() functions to the standard
"int"; no changes are needed but returning the already available
length count.

This will save a few additional strlen() calls later...

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-04 23:51:49 +02:00
Wolfgang Denk
c0c15379e2 exports.c: fix warning: 'dummy' defined but not used
Also get rid of the #ifdef's while doing this.

Suggested-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-04 23:50:55 +02:00
Wolfgang Denk
cd47a83b07 cmd_ide.c: fix unused variable warning for SC3 board
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-04 23:49:33 +02:00
Wolfgang Denk
0e70aaa485 shannon/INFERNO: fix special handling of environment configuration
Remove some INFERNO related #ifdef's from common environment code by
fixing the board configuration settings (add CONFIG_ENV_SECT_SIZE).

While we are at it, fix comment which incorrectly talks about 4 KB
environment size, while it's actually 0x4000 = 16 KiB.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Rolf Offermanns <rof@sysgo.de>
2010-07-04 23:48:55 +02:00
Wolfgang Denk
9add504f0d boards.cfg: fix ML2, am3517_evm and s5p_goni boards
Fix board directory name for ML2 board, and
add missing definitions for am3517_evm and s5p_goni boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-04 23:47:16 +02:00
Wolfgang Denk
291e9044d4 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2010-07-04 23:37:00 +02:00
Wolfgang Denk
f12d4cb48a Merge branch 'sf' of git://git.denx.de/u-boot-blackfin 2010-07-04 23:36:11 +02:00
Stefan Roese
273ed0370d ppc4xx: Add T3COPR board support (PPC460GT based)
This patch adds support for the T3CORP board, based on the
AppliedMicro (APM) PPC460GT.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-07-01 10:26:30 +02:00
Stefan Roese
4978e60584 ppc4xx: Cleanup Boot/FLASH TLB reassignment for PPC440/460
Background Info:
Some PPC440/460 boards have caches enabled in the Boot/FLASH TLB (via
init.S) to speed up the boot process. In relocate_code (start.S) the
cache inhibit attribute for this TLB is set to disable cache. This is
needed for the CFI FLASH driver.

This patch now cleans this code up:
- CONFIG_SYS_TLB_FOR_BOOT_FLASH is defined to 0 (default TLB) if not
  defined in the top of this file. This way, we can remove an ugly
  #ifdef in this code.
- Replace complex "#if defined(CONFIG_440EP) || defined(CONFIG_GR)..."
  statement with "#if defined(CONFIG_440)".
- Remove unnecessary cache invalidate calls resulting in faster bootup.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-07-01 10:26:25 +02:00
Stefan Roese
2909ac03f4 ppc4xx: Add DDR1/2 macros in ppc4xx-sdram.h for non-405EX as well
This patch adds some DDR(2) macros to all PPC4xx's equipped with
this IBM DDR1/2 controller.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-07-01 10:26:20 +02:00
Stefan Roese
e9c020df96 ppc4xx: DDR2: Complete RDSS configuration on non-SPD based boards
As described in item #10 of the SDRAM initialization (chapter 22.2.9
of the PPC460EX/EXr/GT users manual), RDSS may need to be adjusted. The
code for this is now factored out and executed for non-SPD based boards
as well.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-07-01 10:26:15 +02:00
Stefan Roese
066003b2c5 ppc4xx: Enable overwriting of default scan window for IBM DDR2 controller
This patch makes it possible to overwrite the default auto-calibration
scan window (SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR] values) with
board specific values. The parameters of the weak default function are
corrected as well. This way we don't need the casts any more.

This feature will be used by an upcoming PPC460GT board port.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-07-01 10:26:10 +02:00
Stefan Roese
db643773fc ppc4xx: Enable PCIe support without PCI support on PPC440/460
By not defining CONFIG_SYS_PCI_MASTER_INIT and CONFIG_SYS_PCI_TARGET_INIT,
PCI support (host and adapter) will not be enabled. But it's still
possible to use the U-Boot PCI infrastructure for the PCIe ports.

This configuration option is needed for a new 460GT board, which uses
PCIe but has PCI disabled.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-07-01 10:26:01 +02:00
Stefan Roese
fe7cca715c ppc4xx: Enable booting with Option E on 460EX/EXr/GT
This patch enables booting with option E on the PPC460EX/EXr/GT.
When booting with Option E, the PLL is in bypass, CPR0_PLLC[ENG]=0.
The Software Boot Configuration Procedure is needed to engage the
PLL and perform a chip reset.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-07-01 10:25:56 +02:00
Mike Frysinger
b376bbb49f sf: move useful messages from debug to printf
At the moment, the default SPI flash subsystem is quite terse.  Errors and
successes both result in a generic message.  So move the useful errors and
useful successes to printf output by default.

While we're here, also convert the messages to use print_size().

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 23:47:08 -04:00
Thomas Chou
12c2e3bbbe spi_flash: support old STMicro parts with RES
Some old STMicro parts do not support JEDEC ID (0x9f). This patch
uses RES (0xab) to get Electronic ID and translates it to JEDEC ID.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 23:47:08 -04:00
Wolfgang Wegner
7319bcaf8b add redundant environment for env_sf.c
This patch adds redundant environment for environment in SPI flash.
I took env_flash.c as an example and slightly modified it. Apart
from adapting things to SF, I also slightly changed the decision
logic to use area 2 as a default in case the flags are wrong because
not having a default path worried me.

I did not add a section for CONFIG_ENV_IS_IN_SPI_FLASH in environment.h
because I did not understand if this is desired and/or needed.
So to use the feature, one has to set CONFIG_ENV_OFFSET_REDUND _and_
CONFIG_SYS_REDUNDAND_ENVIRONMENT.

I checked it by powering off my board several times during flash
erase or write, because I do not know if there are other stress
test scenarios.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 23:47:08 -04:00
Becky Bruce
a5496a180b drivers/usb/host/ohci-hcd: rename readl/writel to ohci_readl/ohci_writel
This avoids a build warning that you see if anyone in the
header chain has included io.h (which is coming shortly).  The previous
code redefined readl/writel; this patch renames it to be specific to
ohci.  The defines are also moved from ohci-hcd.c to ohci.h.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2010-06-30 21:38:10 +02:00
Ajay Kumar Gupta
944a4894c0 musb: Program extvbus for OMAP3EVM Rev >= E
OMAP3EVM Rev >=E uses external Vbus supply so setting 'extvbus'
to '1' for OMAP3EVM Rev >=E runtime based on EVM revision.

CC: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
2010-06-30 21:37:37 +02:00
Ajay Kumar Gupta
b5abf644aa omap3evm: Add board revision function
Added function to differentiate between the OMAP3EVM revisions. The
chip-id of the ethernet PHY is being used for this purpose.

Rev A to D : 0x01150000
Rev >= E   : 0x92200000

CC: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-30 21:37:37 +02:00
Ajay Kumar Gupta
9bb47abf0d musb: Add Phy programming for using external Vbus
MUSB PHY on OMAP3EVM Rev >= E uses external Vbus supply to support
500mA of power.We need to program MUSB PHY to use external Vbus
for this purpose.

Adding 'extvbus' member in musb_config structure which should be set
by all the boards where MUSB interface is using external Vbus supply.

Also added ULPI bus control register read/write abstraction for
Blackfin processor as it doesn't have ULPI registers.

CC: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 21:37:37 +02:00
Ajay Kumar Gupta
bbf4c01efc musb: Use name based initialization for musb_config
Changed musb_config initialization for omap3.c, davinci.c
and da8xx.c using name of structure fields. This would cause
the uninitialized field to be null by default and thus would
help in avoiding to init some flags required to be set only
for a few selected platforms.

CC: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
2010-06-30 21:37:37 +02:00
Sergey Matyukevich
64203c7b0f USB OHCI support for at91sam9g45 SoC
Add USB OHCI support for at91sam9g45ekes/at91sam9m10g45ek boards.

Note that according to errata from Atmel, OHCI is not operational
on the first revision of at91sam9g45 chip. So this patch enables
OHCI support for later revisions.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2010-06-30 21:37:36 +02:00
Wolfgang Denk
39ddd10b04 Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master 2010-06-30 10:10:32 +02:00
Wolfgang Denk
55357b7846 Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master 2010-06-30 01:04:48 +02:00
Wolfgang Denk
0a9463e935 Merge branch 'master' into next 2010-06-30 01:02:11 +02:00
Wolfgang Denk
bde3892eda Merge branch 'master' of /home/wd/git/u-boot/work 2010-06-30 00:59:21 +02:00
Wolfgang Denk
a59e279976 Prepare 2010.06
Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-29 23:28:28 +02:00
Michael Weiss
955ea6fc27 powerpc/bootcount: Add bootcount support for MPC512x
This also uses the breadcrumb register as on MPC5200.

Signed-off-by: Michael Weiss <michael.weiss@ifm.com>
Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-06-29 23:13:35 +02:00
Wolfgang Denk
a8e2b04417 Merge branch 'master' of /home/wd/git/u-boot/work 2010-06-29 23:03:47 +02:00
Heiko Schocher
161e4ae460 powerpc: fix wrong comment at GOT definitions
r12 is used for accessing the GOT not r14. Fix this in the
comment.

Signed-off-by: Heiko Schocher <hs@denx.de>
2010-06-29 23:03:40 +02:00
Becky Bruce
7030d56b79 MAKEALL: Add missing powerpc 36-bit targets
We were missing 8641HPCN_36BIT and MPC8536DS_36BIT.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2010-06-29 23:03:40 +02:00
Anatolij Gustschin
e03b4d296b Fix compiler warnings for EVB64260, P3G4 and ZUMA
Fix following warnings:

$ ./MAKEALL EVB64260 P3G4 ZUMA
Configuring for EVB64260 board...
mpsc.c: In function 'mpsc_putchar_early':
mpsc.c:121: warning: dereferencing type-punned pointer will break strict-aliasing rules
mpsc.c:127: warning: dereferencing type-punned pointer will break strict-aliasing rules
...

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-06-29 23:03:40 +02:00
Sergei Shtylyov
9fb3b50857 EHCI: zero out QH transfer overlay in ehci_submit_async()
ehci_submit_async() doesn't really zero out the QH transfer overlay (as the EHCI
specification suggests) which leads to the controller seeing the "token" field
as the previous call has left it, i.e.:
- if a timeout occured on the previous call (Active bit left as 1), controller
  incorrectly tries to complete a previous transaction on a newly programmed
  endpoint;
- if a halt occured on the previous call (Halted bit set to 1), controller just
  ignores the newly programmed TD(s) and the function then keeps returning error
  ad infinitum.

This turned out to be caused by the wrong orger of the arguments to the memset()
call in ehci_alloc(), so the allocated TDs weren't cleared either.

While at it, stop needlessly initializing the alternate next TD pointer in the
QH transfer overlay...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Remy Bohmer <linux@bohmer.net>
2010-06-29 23:03:40 +02:00
Remy Bohmer
0d7f4abcf6 Fix console_buffer size conflict error.
The console_buffer size is declared in common/main.c as
   -- char console_buffer[CONFIG_SYS_CBSIZE + 1];
so this extern definition is wrong.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
2010-06-29 23:03:39 +02:00
Poonam Aggrwal
38c38c344c 85xx/p1_p2_rdb: Added RevD board version support
- Also modified the code to use io accessors.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-06-29 23:03:39 +02:00
Felix Radensky
c987f4753b tsec: Fix eTSEC2 link problem on P2020RDB
On P2020RDB eTSEC2 is connected to Vitesse VSC8221 PHY via SGMII.
Current TBI PHY settings for SGMII mode cause link problems on
this platform, link never comes up.

Fix this by making TBI PHY settings configurable and add a working
configuration for P2020RDB.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
2010-06-29 23:03:23 +02:00
Stefano Babic
bd7b26f879 Tools: set multiple variable with fw_setenv utility
Add a sort of batch mode to fw_setenv, allowing to set
multiple variables in one shot, without updating the flash after
each set as now. It is added the possibility to pass
a config file with a list of pairs <variable, value> to be set,
separated by a TAB character.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-06-29 22:43:27 +02:00
Andreas Bießmann
3746a5e65c avr32: add unaligned.h
This patch fixes following error:

zlib.c:31:27: error: asm/unaligned.h: No such file or directory

Suggested-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andreas Biemann <biessmann@corscience.de>
2010-06-29 22:37:23 +02:00
Andreas Bießmann
418cbb0abc avr32: fix linking of atstk100x and favr32 boards
When building some avr32 boards out of tree (e.g. O=..) the linker script could
not be found. This patch references the linker script in source tree.

Signed-off-by: Andreas Biemann <biessmann@corscience.de>
2010-06-29 22:37:11 +02:00
Andreas Bießmann
eb70d05d74 avr32: disable branch folding
Due to a hardware bug mentioned in latest AP7000 datasheet errata
(revision M from 09.09) branch folding is unreliable.
This patch disables CPUCR.FE bitfield as stated in datasheet.

Signed-off-by: Andreas Biemann <biessmann@corscience.de>
2010-06-29 22:34:11 +02:00
Reinhard Meyer
c99ea79078 Fix #if chain and added AVR32 case in cmd_bdinfo.c
AVR32 case was missing in cmd_bdinfo, resulting in compiler warning
(bd->bi_baudrate declared unsigned int at AVR32, but printf used %d)

At the same time slightly reordered #if #elif #endif to make ARM one
of the cases and not an extra case surrounding all others

Signed-off-by: Reinhard Meyer <info@emk-elektronik.de>
Tested-by: Andreas Biemann <biessmann@corscience.de>
2010-06-29 22:32:13 +02:00
Reinhard Meyer (-VC)
d04250cbe1 Fix (null) problem for AVR32 boards
Currently the U-Boot address ranges for AVR32 boards are
printed like this:
"U-Boot code: (null) -> 0001183c  data: 000188e8 -> 0004e9b0"
This patch fixes this to print:
"U-Boot code: 00000000 -> 0001183c  data: 000188f8 -> 0004e9c0"

Signed-off-by: Reinhard Meyer <info@emk-elektronik.de>
2010-06-29 22:30:57 +02:00
Peter Tyser
620bbba524 examples/standalone: Remove relocation compile flags for PowerPC
Previously, standalone applications were compiled with gcc flags that
produced relocatable executables on the PowerPC architecture (eg with
the -mrelocatable and -fPIC flags).  There's no reason for these
applications to be fully relocatable at this time since no relocation
fixups are performed on standalone applications.

Additionally, removing the gcc relocation flags results in the entry
point of applications residing at the base of the image.  When
a standalone application was relocatable, the entry point was generally
located at an offset into the image which was confusing and prone to
errors.

This change moves the entry point of PowerPC standalone applications
from 0x40004 (usually) to 0x40000.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-29 22:29:13 +02:00
Anton Vorontsov
3bf74a4183 hwconfig: Add some unit tests
I use this for testing, and I think this might be useful in the
future.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
2010-06-29 22:24:48 +02:00