Tim Harvey 78c5a18087 arm: mx6: ddr: add pd_fast_exit flag to system information ... DDR3 has a special Precharge power-down mode: fast-exit vs slow-exit. In slow-exit mode the DLL is off but in some quiescent state that makes it easy to turn on again in tXPDLL cycles (about 10tCK) vs the full tDLLK (512tCK). In fast-exist mode the DLL is maintained such that it is ready again in about 3tCK. Signed-off-by: Tim Harvey <tharvey@gateworks.com>		2015-04-22 14:35:35 +02:00
..
clock.h	arm:mx6sx add QSPI support	2014-12-31 14:52:32 +05:30
crm_regs.h	ARM: imx6: disable bandgap self-bias after boot	2015-02-17 10:42:53 +01:00
gpio.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
hab.h	imx6sx: Fix i.MX6SX HAB api function table offset	2014-10-01 09:10:28 +02:00
imx-regs.h	imx6: Added DEK blob generator command	2015-03-02 09:57:06 +01:00
iomux.h	pcie_imx: Add mx6solox support	2014-09-09 17:24:49 +02:00
mx6-ddr.h	arm: mx6: ddr: add pd_fast_exit flag to system information	2015-04-22 14:35:35 +02:00
mx6-pins.h	mx6sx: Add pin definitions	2014-07-10 15:29:16 +02:00
mx6dl-ddr.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
mx6dl_pins.h	i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10	2014-07-10 15:23:56 +02:00
mx6q-ddr.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
mx6q_pins.h	imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK	2014-02-19 10:57:25 +01:00
mx6sl_pins.h	imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use	2015-02-23 09:11:43 +01:00
mx6sx-ddr.h	mx6: Add support for the mx6solox variant	2014-07-10 15:29:16 +02:00
mx6sx_pins.h	mx6sx: Add pin definitions	2014-07-10 15:29:16 +02:00
mxc_hdmi.h	Merge git://git.denx.de/u-boot-arm	2013-07-31 11:30:38 +02:00
sys_proto.h	imx: consolidate set_chipselect_size function	2014-11-20 10:30:19 +01:00