func_periodic_hook does not hangup after playback, relying on hangup
which keeps the channel alive longer than necessary.
Resolves: #325
(cherry picked from commit dd817c2708)
func_periodic_hook was truncating long channel names which
causes issues when you need to run other dialplan functions/apps
on the channel.
Resolves: #319
(cherry picked from commit 9e2433f73f)
If the safe_asterisk script detects that the /var/lib/asterisk
directory doesn't exist, it now creates it with 755 permissions
instead of 770. safe_asterisk needing to create that directory
should be extremely rare though because it's normally created
by 'make install' which already sets the permissions to 755.
Resolves: #316
(cherry picked from commit c929146c61)
Resolves: #298
UserNote: The dial string option 'g' was added to the UnicastRTP channel
which enables RTP glue and therefore native RTP bridges with those
channels.
(cherry picked from commit 98ffcfebda)
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
UserNote: Introduce a new queue configuration option called
'periodic-announce-startdelay' which will vary the normal (historic)
behavior of starting the periodic announcement cycle at
periodic-announce-frequency seconds after entering the queue to start
the periodic announcement cycle at period-announce-startdelay seconds
after joining the queue. The default behavior if this config option is
not set remains unchanged.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
(cherry picked from commit a4cb63e231)
Using the Set dialplan application does not actually
delete channel or global variables. Instead the
variables are set to an empty value.
This change adds two dialplan functions,
GLOBAL_DELETE and DELETE which can be used to
delete global and channel variables instead
of just setting them to empty.
There is also no ability within the dialplan to
determine if a global or channel variable has
actually been set or not.
This change also adds two dialplan functions,
GLOBAL_EXISTS and VARIABLE_EXISTS which can be
used to determine if a global or channel variable
has been set or not.
Resolves: #289
UserNote: Four new dialplan functions have been added.
GLOBAL_DELETE and DELETE have been added which allows
the deletion of global and channel variables.
GLOBAL_EXISTS and VARIABLE_EXISTS have been added
which checks whether a global or channel variable has
been set.
(cherry picked from commit abe4f62554)
* Since ICE candidates are used for the check and pjproject is
required to use ICE, res_rtp_asterisk was failing to compile
when pjproject wasn't available. The check is now wrapped
with an #ifdef HAVE_PJPROJECT.
* The rtp->ice_active_remote_candidates container was being
used to check the address on incoming packets but that
container doesn't contain peer reflexive candidates discovered
during negotiation. This was causing the check to fail
where it shouldn't. We now check against pjproject's
real_ice->rcand array which will contain those candidates.
* Also fixed a bug in ast_sockaddr_from_pj_sockaddr() where
we weren't zeroing out sin->sin_zero before returning. This
was causing ast_sockaddr_cmp() to always return false when
one of the inputs was converted from a pj_sockaddr, even
if both inputs had the same address and port.
Resolves: #500Resolves: #503Resolves: #505
When updating an existing header the 'update' code incorrectly
just copied the new value into the existing buffer. If the
new value exceeded the available buffer size memory outside
of the buffer would be written into, potentially causing
a crash.
This change makes it so that the 'update' now duplicates
the new header value instead of copying it into the existing
buffer.
Add patch to split the log level for invalid packets received on the
signaling port. The warning regarding the packet will move to level 2
so that it can still be displayed, while the raw packet will be at level
4.
When ICE is in use, we can prevent a possible DOS attack by allowing
DTLS protocol messages (client hello, etc) only from sources that
are in the active remote candidates list.
Resolves: GHSA-hxj9-xwr8-w8pq
When using AMI GetConfig, it was possible to access files outside of the
Asterisk configuration directory by using filenames with ".." and "./"
even while live_dangerously was not enabled. This change resolves the
full path and ensures we are still in the configuration directory before
attempting to access the file.
All of the links that reference page anchors with capital letters in
the ids (#Something) have been changed to lower case to match the
anchors that are generated by mkdocs.
(cherry picked from commit c06f938851)
Handle session interval lower than endpoint's configured minimum timer
when sending first answer. Timer setting is checked during this step and
needs to handled appropriately.
Before this change, no response was sent at all. After this change a
response with 422 Session Interval too small is sent to UAC.
(cherry picked from commit 0c0b99c5a1)
If the called party hangs up while digits are being
sent, -1 is returned to indicate so, but app_dial
was not checking the return value, resulting in
the hangup being lost and looping forever until
the caller manually hangs up the channel. We now
abort if digit sending fails.
ASTERISK-29428 #close
Resolves: #281
(cherry picked from commit 4542ffe5d5)
Add quoting around the ps_endpoints 100rel column in the ALTER
statements. Although alembic doesn't complain when generating
sql statements, postgresql does (rightly so).
Resolves: #274
(cherry picked from commit cb9223cdb9)
* Fixed issue with the script not parsing the new tag format for
certified releases. The format changed from certified/18.9-cert5
to certified-18.9-cert5.
* Fixed issue where the asterisk version wasn't being considered
when looking for cached versions.
Resolves: #263
(cherry picked from commit 715594767d)
This adds support for Called Subscriber Held for FXS
lines, which allows users to go on hook when receiving
a call and resume the call later from another phone on
the same line, without disconnecting the call. This is
a convenience mechanism that most real PSTN telephone
switches support.
ASTERISK-30372 #close
Resolves: #240
UserNote: Called Subscriber Held is now supported for analog
FXS channels, using the calledsubscriberheld option. This allows
a station user to go on hook when receiving an incoming call
and resume from another phone on the same line by going on hook,
without disconnecting the call.
(cherry picked from commit 52283301e8)
app_macro sometimes would crash due to datastore list corruption on the
channel because of lack of locking around find and create process for
the macro datastore. This patch locks the channel lock prior to protect
against this problem.
Resolves: #265
(cherry picked from commit 9a28531362)
This reverts commit 617dad4cba.
apps/app_stack.c: Revert buggy gosub patch
This seems to break the case when a predial macro calls a gosub.
When the gosub calls return, the Return function outputs:
app_stack.c:423 return_exec: Return without Gosub: stack is empty
This returns -1 to the calling macro, which returns to app_dial
and causes the call to hangup instead of proceeding with the macro
that invoked the gosub.
Resolves: #253
(cherry picked from commit c8f2698ec6)
Fixes dependency solutions in install_prereq for Debian aarch64
platforms. install_prereq was attempting to forcibly install 32-bit
armhf packages due to the aptitude search for dependencies.
Resolves: #37
(cherry picked from commit fc57dca50d)
If the contact_user is configured on the endpoint it will now be set on the local Contact header URI for incoming calls. The contact_user has already been set on the local Contact header URI for outgoing calls.
Resolves: #226
(cherry picked from commit b286d1cca2)
Added a new boolean configuration flag -
`order_multi_row_results_by_initial_column` - to both res_pgsql.conf
and res_config_odbc.conf that allows the administrator to disable the
explicit `ORDER BY` that was previously being added to all generated
SQL statements that returned multiple rows.
Fixes: #179
(cherry picked from commit 29eb4fe620)
An earlier cherry-pick that involved rest-api somehow didn't include
a comment change in res/ari/resource_endpoints.h. This commit
corrects that. No changes other than the comment.
(cherry picked from commit 64b29be702)
The documentation for PJSIP_HEADERS claims that
prefix is optional, but in the code it is actually not.
However, there is no inherent reason for this, as users
may want to retrieve all header names, not just those
beginning with a certain prefix.
This makes the prefix optional for this function,
simply fetching all header names if not specified.
As a result, the documentation is now correct.
Resolves: #230
UserNote: The prefix argument to PJSIP_HEADERS is now
optional. If not specified, all header names will be
returned.
(cherry picked from commit 8be503b663)
The default is 32 with 8 being used by pjproject itself. Recent
commits have put us over the limit resulting in assertions in
pjproject. Since this value is used in invites, dialogs,
transports and subscriptions as well as the global pjproject
endpoint, we don't want to increase it too much.
Resolves: #255
(cherry picked from commit caf51592e7)
In some cases I have yet to determine some stasis messages may
be created without a channel snapshot. This change adds some
tolerance to this scenario, preventing a crash from occurring.
(cherry picked from commit 07d798875d)
This change adds support for refers that are not session based. It
includes a refer implementation for the PJSIP technology which results
in out-of-dialog REFERs being sent to a PJSIP endpoint. These can be
triggered using the new ARI endpoint `/endpoints/refer`.
Resolves: #71
UserNote: There is a new ARI endpoint `/endpoints/refer` for referring
an endpoint to some URI or endpoint.
(cherry picked from commit 8824b845c4)
Currently, if an FXS channel is still off hook when
all calls on the line have hung up, the user is provided
reorder tone until going back on hook again.
In addition to not reflecting what most commercial switches
actually do, it's very common for switches to automatically
reoriginate for the user so that dial tone is provided without
the user having to depress and release the hookswitch manually.
This can increase convenience for users.
This behavior is now supported for kewlstart FXS channels.
It's supported only for kewlstart (FXOKS) mainly because the
behavior doesn't make any sense for ground start channels,
and loop start signalling doesn't provide the necessary DAHDI
event that makes this easy to implement. Likely almost everyone
is using FXOKS over FXOLS anyways since FXOLS is pretty useless
these days.
ASTERISK-30357 #close
Resolves: #224
UserNote: The autoreoriginate setting now allows for kewlstart FXS
channels to automatically reoriginate and provide dial tone to the
user again after all calls on the line have cleared. This saves users
from having to manually hang up and pick up the receiver again before
making another call.
(cherry picked from commit c16cc93a4b)
In the case where mute was called on a channel that had no
audiohooks the code was not unlocking the channel, resulting
in a deadlock.
Resolves: #233
(cherry picked from commit 5ebe1b61bd)
sig_analog allows users to flash and use the three-way dial
tone as a primitive hold function, simply by never timing
it out.
Some systems allow this dial tone to time out to silence,
so the user is not annoyed by a persistent dial tone.
This option allows the dial tone to time out normally to
silence.
ASTERISK-30004 #close
Resolves: #205
UserNote: The threewaysilenthold option now allows the three-way
dial tone to time out to silence, rather than continuing forever.
(cherry picked from commit 5516763e57)
In 8d6fdf9c3a invisible bridges were
skipped but that lead to producing metrics with no name and no help.
Keep track of the number of metrics configured and then only emit these.
Add a basic testcase that verifies that there is no '(NULL)' in the
output.
ASTERISK-30474
(cherry picked from commit a10de8bc72)
Fixes#221
UserNote: res_pjsip now allows TLS v1.3 to be enabled if supported by
the underlying PJSIP library. The bundled version of PJSIP supports
TLS v1.3.
(cherry picked from commit b5762cd54e)
This adds an example to the XML documentation clarifying usage
of the CUT function to address a common misusage.
(cherry picked from commit c0b8adfe4d)
c3ff4648 removed the [iaxtel700] context but neglected to remove
references to it.
This commit addresses that and also removes iaxtel and freeworlddialup
references from other config files.
(cherry picked from commit df87ada8ac)