These two variables were previously not being set when comebacktoorigin=yes
and the example configs seemed to imply that they should be. Since there
is no harm in this and since calls that are sent back to origin are capable
of continuing in the dialplan, this seemed like a no-brainer. Also it
supports some bridging tests I've been working on.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make skinny reset vmexten and immeddial to '\0' on reload to ensure that
it is set to '\0' if the appropriate item is removed/commented in
skinny.conf. Also small fix re immeddial char in skinny.conf and add
immedial setting to skinny show settings.
(closes issue ASTERISK-21037)
Reported by: snuffy
Tested by: snuffy, myself
Patches:
immed_dial_fix.diff uploaded by snuffy (license 5024)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery is a unifying data access layer which provides a pluggable mechanism to allow
object creation, retrieval, updating, and deletion using different backends (or wizards).
This is a fancy way of saying "one interface to rule them all" where them is configuration,
realtime, and anything else that comes along.
Review: https://reviewboard.asterisk.org/r/2259/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a dial softkey when the device is in DAFD. The softkey is greyed (unusable)
until a possible dialplan match is entered. Code includes updating
transmit_selectsoftkeys to allow the use of a button mask. Also add option
to use # or * as a dial now button. Original patch by snuffy cleaned up by myself.
Review: https://reviewboard.asterisk.org/r/2277/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ringinuse=no queue members can receive more than one call if these
calls happen at nearly the same time.
* Fix so a queue member does not receive more than one call from a queue.
NOTE: This fix does not prevent multiple calls to a member if the member
is in more than one queue.
* Did some refactoring to eliminate some code redundancy.
(issue ASTERISK-16115)
Reported by: nik600
Patches:
jira_asterisk_16115_single_q_v1.8.patch (license #5621) patch uploaded by rmudgett
Modified
* Revert the -r341580 and -r341599 changes adding the queues.conf
check_state_unknown option as it was added in an attempt to fix this
problem. The fix did not need to be optional. The fix should not have
tried to explicitly set the device state. Setting the device state by
something other than the device introduces a race condition. I also could
not see how the change would be effective other than delaying the
app_queue code long enough for the device state to propagate to app_queue.
........
Merged revisions 378663 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378683 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378687 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is an interesting feature that allows additional strings to be used to
search the Directory, primarily intended to be used with nicknames, but could
be used with affiliations and the like. Because the name field is used in
more than one place (such as email notifications), it is important that these
additional strings not be placed in the name field, but be specified
separately.
Review: https://reviewboard.asterisk.org/r/2244/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
configured codecs to take precedence on an outgoing call.
This change introduces a new peer configuration property named
'ignore_requested_pref' that causes the requested codec to be ignored when
determining the preferred codec for an outgoing call leg. The consequence is
that Asterisk's usual efforts to prefer avoiding transcoding can be overridden
on a peer-by-peer basis where appropriate.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377971 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on feedback from numerous individuals this patch tweaks incoming calls
to first look for an extension with the name of the endpoint. If no such extension
exists the call will silently fall back to the "s" extension as it previously
did.
........
Merged revisions 376983 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376984 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With ICE support enabled in chan_sip and a large number of interfaces on the system it was
possible for the produced SDP to be truncated due to some fixed size buffers. These buffers
have now been changed so they will dynamically grow as needed.
ICE support is now also enabled by default in res_rtp_asterisk to provide a smoother experience
for chan_motif users where it is required. To maintain the previous behavior in chan_sip it is
no longer enabled by default there.
(closes issue ASTERISK-20643)
Reported by: coopvr
........
Merged revisions 376130 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was introduced in chan_sip by changes to sip reload introduced by
r349097. That patch moved peer purging from the beginning of the reload to
after the general configuration was finished. This patch fixes that by undoing
the repositioning of the original peer purging code and using a similar
function after performing general configuration that purges only autocreated
peers that were created when persist mode isn't enabled.
(closes issue ASTERISK-20611)
Reported by: Alisher
Review: https://reviewboard.asterisk.org/r/2171/
........
Merged revisions 375575 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Commiting this on behalf of Kaloyan Kovachev (license 5506).
AlarmReceiver now supports the following DTMF signaling types:
- ContactId
- 4x1
- 4x2
- High Speed
- Super Fast
We are also auto-detecting which signaling is being received. So support for
those protocols should work out-the-box. Correctly identify ALAW / ULAW calls.
Some enhanced protection for broken panels and malicious callers where added.
(closes issue ASTERISK-20289)
Reported by: Kaloyan Kovachev
Review: https://reviewboard.asterisk.org/r/2088/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375150 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since there are a number of legacy devices out there that fail to handle ICE
candidates properly (which is a nice way of saying something much uglier),
disable it by default.
Support for ICE candidates can be enabled in rtp.conf using the icesupport
setting.
........
Merged revisions 374676 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries.
Various countries have different specifications for the maximum power level differences
between the DTMF low group and high group of frequencies.
Power level difference between frequencies for different Administrations/RPOAs
NTT = Max. 5 dB
AT&T = 4dB(reverse) to 8dB(normal)
Danish = Max. 6 dB
Australian = Max. 10 dB
Brazilian = Max. 9 dB
ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03)
Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB.
Default is AT&T specifications
Add's the following variables to dsp.conf
;dtmf_normal_twist=6.31
;dtmf_reverse_twist=2.51
;relax_dtmf_normal_twist=6.31
;relax_dtmf_reverse_twist=3.98
(closes issue ASTERISK-20442)
Reported by: tbsky
Tested by: tbsky,alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2141/
........
Merged revisions 374384 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374385 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374386 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP session timer mechanism contains a mandatory 'refresher' parameter
(included in the Session-Expires header) which is used in the session timer
offer/answer signaling within a SIP Invite dialog. It looks like asterisk is
interpreting the uac resp. uas role only as the initial role of client and
server (caller is uac, callee is uas). The standard rfc 4028 however assigns
the client role to the ((RE)-Invite) requester, the server role to the
((RE)-Invite) responder.
This patch has Asterisk track the actual refresher as "us" or "them" as opposed
to relying on just the configured "uas" or "uac" properties.
(closes issue AST-922)
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/2118/
........
Merged revisions 373652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373665 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373690 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes the turnport configuration property and changes the
turnaddr property to be a combined host[:port] configuration string. The
patch also modifies the documentation in the example configuration to
reflect the property changes and adds some additional text indicating how
the STUN port is configured.
(closes issue ASTERISK-20344)
Reported by: beagles
Tested by: beagles
Review: https://reviewboard.asterisk.org/r/2111/
........
Merged revisions 373403 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sets INUSE when no free agents, NOT_INUSE when an agent is free.
modifes handle_statechange() scan members loop to scan for a free agent
and updates the Queue:queuename_avial devstate.
Previously exited early if the member was found in the queue.
Now Exits later when both a member was found, and a free agent was found.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2121/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373188 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this option in use, it may be necessary to regulate your log files
externally.
(closes issue ASTERISK-20189)
Reported by: Jaco Kroon
Patches:
asterisk-logger-norotate-trunk.patch uploaded by Jaco Kroon (license 5671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to 1.8, it was not necessary for an explicit "type" to be set for an
asterisk LDAP realtime peer. Now the routine find_peer actually checks the
type field during registration and fails to find the peer if it is not set.
The attached patch makes the realtime type equal whatever type is being
searched for if the type is 0 upon return from routine build_peer.
(closes issue ASTERISK-17222)
Reported by: John Covert
Patch by: David Vossel
Tested by: Darren Sessions
Review: https://reviewboard.asterisk.org/r/2095/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a patch from kkm from review board.
This is useful for adding headers to REFER requests that
emanate from a Transfer() dialplan application call.
This also fixes some uses of the Referred-by header, removing
an extra set of angle brackets.
I've modified the reporter's original patch to not require
any additions to the sip_refer header and to just remove the
referred_by_name from sip_refer since it is no longer needed
or used.
(closes Issue ASTERISK-17639)
reported by Kirill Katsnelson
Patches:
019059-sip-refer-addheaders-trunk-353549.diff
uploaded by Kirill Katsnelson (license #5845)
Review: https://reviewboard.asterisk.org/r/1159
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this option set, channel variables can be set on
every manager originate. The Variable header can still
be used to set additional channel variables for individual
calls if desired.
This work was completed by Olle Johansson on review board.
I have applied the review feedback and am committing it in
order to get this into trunk before Asterisk 11 is branched.
Review: https://reviewboard.asterisk.org/r/1412
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds Named ACL functionality to Asterisk. This allows system
administrators to define an ACL and refer to it by a unique name. Configurable
items can then refer to that name when specifying access control lists.
It also includes updates to all core supported consumers of ACLs. That includes
manager, chan_sip, and chan_iax2. This feature is based on the deluxepine-trunk
by Olle E. Johansson and provides a subset of the Named ACL functionality
implemented in that branch. For more information on this feature, see acl.conf
and/or the Asterisk wiki.
Review: https://reviewboard.asterisk.org/r/1978/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This channel driver is a replacement for both chan_gtalk and chan_jingle but adds additional features not found in either.
These features include full configuration reload, video, full codec support, bidirectional cause code mapping, hold,
unhold, and ringing indication. It is also compliant with the current published Jingle and Google Jingle specifications.
The original Google Talk protocol is also supported for Google Voice interoperability.
You may ask yourself though where the name motif comes from... and I would say to you... music!
motif: a perceivable or salient recurring fragment or succession of notes
Sorta like a jingle!
Review: https://reviewboard.asterisk.org/r/1917/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
options are documented in config sample
sample config rename to proper name - ooh323.conf
To change media address ooh323 send empty TCS if there was
completed TCS exchange or send facility forwardedelements
with new fast start proposal if not.
Then close transmit logical channels and renew TCS exchange.
If new fast start proposal is received then ooh323 stack call back
channel driver routine to change rtp address in the rtp instance.
If empty TCS is received then close transmit logical channels and
renew TCS exchange
Review: https://reviewboard.asterisk.org/r/1607/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows the setting of flags via the config options api.
For example, code like this:
#define OPT1 1 << 0
#define OPT2 1 << 1
#define OPT3 1 << 2
struct thing {
unsigned int flags;
};
and a config like this:
[blah]
opt1=yes
opt2=no
opt3=yes
Review: https://reviewboard.asterisk.org/r/2004/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk servers are set up back-to-back, and
direct media is to be used betweeen endpoints, it is
fairly common for the two Asterisk servers to send
direct media reinvites to each other simultaneously.
This results in 491s and ACKs being exchanged between
the servers. While the media eventually gets set up
properly, the problem is that there can be a noticeable
delay for the streams to stabilize.
This patch adds a new directmedia option called "outgoing".
With this set, an immediate direct media reinvite will only
be sent if the call direction is outgoing. For incoming
dialogs, an immediate direct media reinvite will not be sent,
but further "reactionary" direct media reinvites may be sent.
Review: https://reviewboard.asterisk.org/r/1954
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a number of methods for controlling the setting of 'ringinuse'
which is basically the same concept as the old ignorebusy setting,
only now the per member setting always controls whether or not the
member is actually ringed while in use. A CLI command and a manager
action have been added to change a given queue member's ringinuse
option while Asterisk is running and the an argument has been added
for adding members with deliberately set ringinuse in queues.conf
Some effort has been made to ensure compatability with dialplans and
databases still referring to 'ignorebusy'.
(issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you hit the wrong DTMF digit trying to accept/decline a FollowMe call,
you had to wait for the prompt to repeat to try again.
* Make FollowMe compare the last DTMF digits received to the
accept/decline matching strings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If enabled using the keepalive option in sip.conf a small packet will be sent
at a regular interval to keep the NAT mapping open. This is lightweight as the
remote side does not need to parse and handle a SIP message.
(closes issue AST-783)
Review: https://reviewboard.asterisk.org/r/1756/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk has a setting for the minimum allowed DTMF. If we get shorter
DTMF tones, these will be changed to the minimum on the outbound call
leg.
(closes issue ASTERISK-19772)
Review: https://reviewboard.asterisk.org/r/1882/
Reported by: oej
Tested by: oej
Patches by: oej
Thanks to the reviewers.
1.8 branch for this patch: agave-dtmf-duration-asterisk-conf-1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several telcos bring the BRI PTMP layer 1 down when the line is idle.
When layer 1 goes down, Asterisk cannot make outgoing calls. Incoming
calls could fail as well because the alarm processing is handled by a
different code path than the Q.931 messages.
* Add the layer1_presence configuration option to ignore layer 1 alarms
when the telco brings layer 1 down. This option can be configured by span
while the similar DAHDI driver teignorered=1 option is system wide. This
option unlike layer2_persistence does not require libpri v1.4.13 or newer.
Related to JIRA AST-598
JIRA ABE-2845
........
Merged revisions 362428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362429 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-18809 eliminated the legacy macro invocation of the stdexten in
favor of the Gosub method without a means of backwards compatibility.
(issue ASTERISK-18809)
(closes issue ASTERISK-19457)
Reported by: Matt Jordan
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1855/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added new chan_dahdi.conf colp_send option parameter to block connected
line updates per span.
(closes issue ASTERISK-17025)
Reported by: Michael Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added ability to use multiple lines on phone, so for one device in configuration multiple lines can be defined, it allows to have multiple calls on one phone, callwaiting and switching between calls.
* Added ability for translation on-screen menu to multiple languages. Tested on Russian languages. Supported encodings: ISO 8859-1, ISO 8859-2, ISO 8859-4, ISO 8859-5, ISO 2022-JP. Language controlled by 'language' and on-screen menu of phone
* Other described in CHANGES file
Testing done by issue tracker users: ibercom, scsiborg, idarwin, TeknoJuce, c0rnoTa.
Tested on production system by Jonn Taylor (jonnt) using phone models: Nortel i2004, 1120E and 1140E.
(closes issue ASTERISK-16890)
Review: https://reviewboard.asterisk.org/r/1243/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For analog lines, enables Asterisk to use dialtone detection per channel
if an incoming call was hung up before it was answered. If dialtone is
detected, the call is hung up.
no: Disabled. (Default)
yes: Look for dialtone for 10000 ms after answer.
<number>: Look for dialtone for the specified number of ms after answer.
always: Look for dialtone for the entire call. Dialtone may return
if the far end hangs up first.
dialtone_detect=yes
dialtone_detect=5000
dialtone_detect=always
(closes issue ASTERISK-19316)
Reported by: Jeremy Pepper
Patch by: Jeremy Pepper
Tested by: rmudgett,Jeremy Pepper
Review: https://reviewboard.asterisk.org/r/1737/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
send_diversion=no will prevent Diversion headers from being added to SIP
requests. This doesn't prevent Diversion from being added with dialplan
such as with SIPAddHeader.
(closes issue ASTERISK-16862)
Reported by: rsw686
Review: https://reviewboard.asterisk.org/r/1769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There can only be one database connection in res_config_pgsql just like
res_config_sqlite. If the connection is lost, the connection may not get
reestablished to the same database if the res_pgsql.conf and
extconfig.conf files are inconsistent.
* Made only use the configured database from res_pgsql.conf.
* Fixed potential buffer overwrite of last[] in config_pgsql().
(closes issue ASTERISK-16982)
Reported by: german aracil boned
Review: https://reviewboard.asterisk.org/r/1731/
........
Merged revisions 354953 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354959 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the auto_force_rport and auto_comedia NAT options. It
also converts the nat= setting to a list of comma-separated combinable
options: no, force_rport, comedia, auto_force_rport, and auto_comedia.
nat=yes remains as an undocumented option equal to
"force_rport,comedia". The first instance of 'yes' or 'no' in the list
stops parsing and overrides any previously set options. If an auto_*
option is specified with its non-auto_ counterpart, the auto setting
takes precedence.
This patch builds upon the patch posted to ASTERISK-17860 by JIRA user
pedro-garcia.
(closes issue ASTERISK-17860)
Review: https://reviewboard.asterisk.org/r/1698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes res_ais and introduces a new module, res_corosync.
The OpenAIS project is deprecated and is now just a wrapper around
Corosync. This module provides the same functionality using the same
core infrastructure, but without the use of the deprecated components.
Technically res_ais could have been used with an AIS implementation other
than OpenAIS, but that is the only one I know of that was ever used.
Review: https://reviewboard.asterisk.org/r/1700/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now supports using ODBC with databases where a single schema must be
selected. Previously, INSERTs would fail because they did not take into
account extra fields cause by having multiple schemas. This also corrects
some SQL resource leaks.
(closes issue ASTERISK-17106)
Patch-by: Alexander Frolkin
Patch-by: Tilgnman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removes references to tlsbindport from http.conf.sample and manager.conf.sample
* Properly bind to port specified in tlsbindaddr, using the default port if specified.
* On a reload, properly close socket if the service has been disabled.
A note has been added to UPGRADE.txt to indicate how ports must be set for TLS.
(closes issue ASTERISK-16959)
reported by Olaf Holthausen
(closes issue ASTERISK-19201)
reported by Chris Mylonas
(closes issue ASTERISK-19204)
reported by Chris Mylonas
Review: https://reviewboard.asterisk.org/r/1709
........
Merged revisions 353770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353820 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL eventtype field for ODBC and PGSQL backends should be USER_DEFINED
instead of the user defined event name supplied by the CELGenUserEvent
application. If the field is output as a number, the user defined name
does not have a value and is always output as 21 for USER_DEFINED and the
userdeftype field would be required to supply the user defined name.
The following CEL backends (cel_odbc, cel_pgsql, cel_custom, cel_manager,
and cel_sqlite3_custom) can be independently configured to remove this
inconsistency.
* Allows cel_manager, cel_custom, and cel_sqlite3_custom to behave the
same way.
(closes issue ASTERISK-17189)
Reported by: Bryant Zimmerman
Review: https://reviewboard.asterisk.org/r/1669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a feature patch which allows an 'announcement' option to be specified in
musiconhold.conf which should be set to the name of a sound. If a valid sound is
specified for this option, then it will be played on that music on hold class whenever
a channel bound to that class is put on hold as well as when Asterisk is able to detect
that a song has ended before starting the next song (excludes external players).
(closes ASTERISK-18977)
Reported by: Timo Teräs
Patches:
asterisk-moh-announcement.diff uploaded by Timo Teräs (license 5409)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds per-parking lot options comebackcontext and comebackdialtime
* Makes comebacktoorigin settable per parking lot
* Sets a PARKER channel variable when comebacktoorigin is disabled
(closes issue ASTERISK-16643)
Reported by: Mitch Sharp (bluecrow76)
Patches:
asterisk-1.6.2.17.2-park-features-comebackcontext-consolidated-v3.diff by Mitch Sharp (bluecrow76) license 5231
with updates by me.
Review: https://reviewboard.asterisk.org/r/1674
Review: https://reviewboard.asterisk.org/r/963
Reviewed by Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to better handle RTP sources with strictrtp enabled (which is now default in 10)
using the learning mode to figure out new sources when they change is handled by checking
for a number of consecutive (by sequence number) packets received to an rtp struct
based on a new configurable value called 'probation'. Also, during learning mode instead
of liberally accepting all packets received, we now reject packets until a clear source
has been determined.
Review: https://reviewboard.asterisk.org/r/1663/
........
Merged revisions 351287 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 351289 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Multiple revisions 350555,350571
........
r350555 | rmudgett | 2012-01-13 11:12:51 -0600 (Fri, 13 Jan 2012) | 12 lines
Add missing CEL logging fields to various CEL backends.
* Add missing eventextra to cel_psql.c and cel_odbc.c.
* Add missing PeerAccount and EventExtra to cel_manager.c.
* Add missing userdeftype support for cel_custom.conf.sample and
cel_sqlite3_custom.conf.sample.
(closes issue ASTERISK-17190)
Reported by: Bryant Zimmerman
........
r350571 | rmudgett | 2012-01-13 11:23:57 -0600 (Fri, 13 Jan 2012) | 8 lines
Use compatible names for event extra data for various CEL backends.
* Change eventextra to extra in cel_psql.c and cel_odbc.c.
* Change EventExtra to Extra in cel_manager.c.
(issue ASTERISK-17190)
........
Merged revisions 350555,350571 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350585 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the imapserver, imapport, and imapflags settings to be
overridden for any voicemail user. It also documents the settings in
the sample voicemail.conf file, and updates the voicemail schema to
allow storage of those columns.
(closes issue ASTERISK-16489)
Reporter: Hubert Mickael
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1614/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds two new options to SIP peers allowing them to specify features (dynamic or builtin)
to use when sending INFO/record requests. Recordonfeature activates whatever feature
is specified when recieving a record: on request while recordofffeature activates
whatever feature is specified when receiving a record: off request. Both of these
features can be disabled by setting the feature to an empty string.
(closes issue ASTERISK-16507)
Reported by: Jon Bright
Review: https://reviewboard.asterisk.org/r/1634/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves destruction of sip peers to immediately after the general section of
sip.conf is read so that autocreatepeer setting can be read before deletion of peers.
If autocreatepeer=persist at reload, then peers created by the autocreatepeer setting
will be skipped when purging the current SIP peer list.
(closes ASTERISK-16508)
Reported by: Kirill Katsnelson
Patches:
017797-kkm-persist-autopeers-1.8.patch uploaded by Kirill Katsnelson (license 5845)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to check the availability of the caller's name, app_voicemail will check for an
audio file in <astspooldir>/recordings/callerids/
This change sets a precedent for where to put recordings of names. Currently the idea is
that recordings here could also be used for applications like confbridge and meetme to
find recorded names in this folder from callerid (when another recording isn't available)
(closes issue ASTERISK-18565)
Reporter: Russell Brown
Patches:
r uploaded by Russel Brown (license 6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PARKEDCALL variable tracks which parking lot the call was last parked in. This can be
used afterwards for flow control when returntoorigin is set to off. I went ahead and
documented both this and the existing variable set during timeout (PARKINGSLOT) in
the sample features.conf since there was no prior mention of variables being set during
timeout.
(closes issue ASTERISK-16239)
Reported By: Clod Patry
Patches:
M17503.diff uploaded by Clod Patry (license 5138)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348161 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3