This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you hit the wrong DTMF digit trying to accept/decline a FollowMe call,
you had to wait for the prompt to repeat to try again.
* Make FollowMe compare the last DTMF digits received to the
accept/decline matching strings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If enabled using the keepalive option in sip.conf a small packet will be sent
at a regular interval to keep the NAT mapping open. This is lightweight as the
remote side does not need to parse and handle a SIP message.
(closes issue AST-783)
Review: https://reviewboard.asterisk.org/r/1756/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk has a setting for the minimum allowed DTMF. If we get shorter
DTMF tones, these will be changed to the minimum on the outbound call
leg.
(closes issue ASTERISK-19772)
Review: https://reviewboard.asterisk.org/r/1882/
Reported by: oej
Tested by: oej
Patches by: oej
Thanks to the reviewers.
1.8 branch for this patch: agave-dtmf-duration-asterisk-conf-1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several telcos bring the BRI PTMP layer 1 down when the line is idle.
When layer 1 goes down, Asterisk cannot make outgoing calls. Incoming
calls could fail as well because the alarm processing is handled by a
different code path than the Q.931 messages.
* Add the layer1_presence configuration option to ignore layer 1 alarms
when the telco brings layer 1 down. This option can be configured by span
while the similar DAHDI driver teignorered=1 option is system wide. This
option unlike layer2_persistence does not require libpri v1.4.13 or newer.
Related to JIRA AST-598
JIRA ABE-2845
........
Merged revisions 362428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362429 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-18809 eliminated the legacy macro invocation of the stdexten in
favor of the Gosub method without a means of backwards compatibility.
(issue ASTERISK-18809)
(closes issue ASTERISK-19457)
Reported by: Matt Jordan
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1855/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added new chan_dahdi.conf colp_send option parameter to block connected
line updates per span.
(closes issue ASTERISK-17025)
Reported by: Michael Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added ability to use multiple lines on phone, so for one device in configuration multiple lines can be defined, it allows to have multiple calls on one phone, callwaiting and switching between calls.
* Added ability for translation on-screen menu to multiple languages. Tested on Russian languages. Supported encodings: ISO 8859-1, ISO 8859-2, ISO 8859-4, ISO 8859-5, ISO 2022-JP. Language controlled by 'language' and on-screen menu of phone
* Other described in CHANGES file
Testing done by issue tracker users: ibercom, scsiborg, idarwin, TeknoJuce, c0rnoTa.
Tested on production system by Jonn Taylor (jonnt) using phone models: Nortel i2004, 1120E and 1140E.
(closes issue ASTERISK-16890)
Review: https://reviewboard.asterisk.org/r/1243/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For analog lines, enables Asterisk to use dialtone detection per channel
if an incoming call was hung up before it was answered. If dialtone is
detected, the call is hung up.
no: Disabled. (Default)
yes: Look for dialtone for 10000 ms after answer.
<number>: Look for dialtone for the specified number of ms after answer.
always: Look for dialtone for the entire call. Dialtone may return
if the far end hangs up first.
dialtone_detect=yes
dialtone_detect=5000
dialtone_detect=always
(closes issue ASTERISK-19316)
Reported by: Jeremy Pepper
Patch by: Jeremy Pepper
Tested by: rmudgett,Jeremy Pepper
Review: https://reviewboard.asterisk.org/r/1737/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
send_diversion=no will prevent Diversion headers from being added to SIP
requests. This doesn't prevent Diversion from being added with dialplan
such as with SIPAddHeader.
(closes issue ASTERISK-16862)
Reported by: rsw686
Review: https://reviewboard.asterisk.org/r/1769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There can only be one database connection in res_config_pgsql just like
res_config_sqlite. If the connection is lost, the connection may not get
reestablished to the same database if the res_pgsql.conf and
extconfig.conf files are inconsistent.
* Made only use the configured database from res_pgsql.conf.
* Fixed potential buffer overwrite of last[] in config_pgsql().
(closes issue ASTERISK-16982)
Reported by: german aracil boned
Review: https://reviewboard.asterisk.org/r/1731/
........
Merged revisions 354953 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354959 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the auto_force_rport and auto_comedia NAT options. It
also converts the nat= setting to a list of comma-separated combinable
options: no, force_rport, comedia, auto_force_rport, and auto_comedia.
nat=yes remains as an undocumented option equal to
"force_rport,comedia". The first instance of 'yes' or 'no' in the list
stops parsing and overrides any previously set options. If an auto_*
option is specified with its non-auto_ counterpart, the auto setting
takes precedence.
This patch builds upon the patch posted to ASTERISK-17860 by JIRA user
pedro-garcia.
(closes issue ASTERISK-17860)
Review: https://reviewboard.asterisk.org/r/1698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes res_ais and introduces a new module, res_corosync.
The OpenAIS project is deprecated and is now just a wrapper around
Corosync. This module provides the same functionality using the same
core infrastructure, but without the use of the deprecated components.
Technically res_ais could have been used with an AIS implementation other
than OpenAIS, but that is the only one I know of that was ever used.
Review: https://reviewboard.asterisk.org/r/1700/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now supports using ODBC with databases where a single schema must be
selected. Previously, INSERTs would fail because they did not take into
account extra fields cause by having multiple schemas. This also corrects
some SQL resource leaks.
(closes issue ASTERISK-17106)
Patch-by: Alexander Frolkin
Patch-by: Tilgnman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removes references to tlsbindport from http.conf.sample and manager.conf.sample
* Properly bind to port specified in tlsbindaddr, using the default port if specified.
* On a reload, properly close socket if the service has been disabled.
A note has been added to UPGRADE.txt to indicate how ports must be set for TLS.
(closes issue ASTERISK-16959)
reported by Olaf Holthausen
(closes issue ASTERISK-19201)
reported by Chris Mylonas
(closes issue ASTERISK-19204)
reported by Chris Mylonas
Review: https://reviewboard.asterisk.org/r/1709
........
Merged revisions 353770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353820 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL eventtype field for ODBC and PGSQL backends should be USER_DEFINED
instead of the user defined event name supplied by the CELGenUserEvent
application. If the field is output as a number, the user defined name
does not have a value and is always output as 21 for USER_DEFINED and the
userdeftype field would be required to supply the user defined name.
The following CEL backends (cel_odbc, cel_pgsql, cel_custom, cel_manager,
and cel_sqlite3_custom) can be independently configured to remove this
inconsistency.
* Allows cel_manager, cel_custom, and cel_sqlite3_custom to behave the
same way.
(closes issue ASTERISK-17189)
Reported by: Bryant Zimmerman
Review: https://reviewboard.asterisk.org/r/1669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a feature patch which allows an 'announcement' option to be specified in
musiconhold.conf which should be set to the name of a sound. If a valid sound is
specified for this option, then it will be played on that music on hold class whenever
a channel bound to that class is put on hold as well as when Asterisk is able to detect
that a song has ended before starting the next song (excludes external players).
(closes ASTERISK-18977)
Reported by: Timo Teräs
Patches:
asterisk-moh-announcement.diff uploaded by Timo Teräs (license 5409)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds per-parking lot options comebackcontext and comebackdialtime
* Makes comebacktoorigin settable per parking lot
* Sets a PARKER channel variable when comebacktoorigin is disabled
(closes issue ASTERISK-16643)
Reported by: Mitch Sharp (bluecrow76)
Patches:
asterisk-1.6.2.17.2-park-features-comebackcontext-consolidated-v3.diff by Mitch Sharp (bluecrow76) license 5231
with updates by me.
Review: https://reviewboard.asterisk.org/r/1674
Review: https://reviewboard.asterisk.org/r/963
Reviewed by Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to better handle RTP sources with strictrtp enabled (which is now default in 10)
using the learning mode to figure out new sources when they change is handled by checking
for a number of consecutive (by sequence number) packets received to an rtp struct
based on a new configurable value called 'probation'. Also, during learning mode instead
of liberally accepting all packets received, we now reject packets until a clear source
has been determined.
Review: https://reviewboard.asterisk.org/r/1663/
........
Merged revisions 351287 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 351289 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Multiple revisions 350555,350571
........
r350555 | rmudgett | 2012-01-13 11:12:51 -0600 (Fri, 13 Jan 2012) | 12 lines
Add missing CEL logging fields to various CEL backends.
* Add missing eventextra to cel_psql.c and cel_odbc.c.
* Add missing PeerAccount and EventExtra to cel_manager.c.
* Add missing userdeftype support for cel_custom.conf.sample and
cel_sqlite3_custom.conf.sample.
(closes issue ASTERISK-17190)
Reported by: Bryant Zimmerman
........
r350571 | rmudgett | 2012-01-13 11:23:57 -0600 (Fri, 13 Jan 2012) | 8 lines
Use compatible names for event extra data for various CEL backends.
* Change eventextra to extra in cel_psql.c and cel_odbc.c.
* Change EventExtra to Extra in cel_manager.c.
(issue ASTERISK-17190)
........
Merged revisions 350555,350571 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350585 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the imapserver, imapport, and imapflags settings to be
overridden for any voicemail user. It also documents the settings in
the sample voicemail.conf file, and updates the voicemail schema to
allow storage of those columns.
(closes issue ASTERISK-16489)
Reporter: Hubert Mickael
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1614/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds two new options to SIP peers allowing them to specify features (dynamic or builtin)
to use when sending INFO/record requests. Recordonfeature activates whatever feature
is specified when recieving a record: on request while recordofffeature activates
whatever feature is specified when receiving a record: off request. Both of these
features can be disabled by setting the feature to an empty string.
(closes issue ASTERISK-16507)
Reported by: Jon Bright
Review: https://reviewboard.asterisk.org/r/1634/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves destruction of sip peers to immediately after the general section of
sip.conf is read so that autocreatepeer setting can be read before deletion of peers.
If autocreatepeer=persist at reload, then peers created by the autocreatepeer setting
will be skipped when purging the current SIP peer list.
(closes ASTERISK-16508)
Reported by: Kirill Katsnelson
Patches:
017797-kkm-persist-autopeers-1.8.patch uploaded by Kirill Katsnelson (license 5845)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to check the availability of the caller's name, app_voicemail will check for an
audio file in <astspooldir>/recordings/callerids/
This change sets a precedent for where to put recordings of names. Currently the idea is
that recordings here could also be used for applications like confbridge and meetme to
find recorded names in this folder from callerid (when another recording isn't available)
(closes issue ASTERISK-18565)
Reporter: Russell Brown
Patches:
r uploaded by Russel Brown (license 6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PARKEDCALL variable tracks which parking lot the call was last parked in. This can be
used afterwards for flow control when returntoorigin is set to off. I went ahead and
documented both this and the existing variable set during timeout (PARKINGSLOT) in
the sample features.conf since there was no prior mention of variables being set during
timeout.
(closes issue ASTERISK-16239)
Reported By: Clod Patry
Patches:
M17503.diff uploaded by Clod Patry (license 5138)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348161 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The STUN socket must remain open between polls or the external address
seen by the STUN server is likely to change. However, if the STUN request
poll fails then the STUN server address needs to be re-resolved and the
STUN socket needs to be closed and reopened.
* Re-resolve the STUN server address and create a new socket if the STUN
request poll fails.
* Fix ast_stun_request() return value consistency.
* Fix ast_stun_request() to check the received packet for expected message
type and transaction ID.
* Fix ast_stun_request() to read packets until timeout or an associated
response packet is found. The stun_purge_socket() hack is no longer
required.
* Reduce ast_stun_request() error messages to debug output.
* No longer pass in the destination address to ast_stun_request() if the
socket is already bound or connected to the destination.
(closes issue ASTERISK-18327)
Reported by: Wolfram Joost
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1595/
........
Merged revisions 346700 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 346701 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds two new menu features to app_confbridge, admin_toggle_menu_
participants and participant_count. The admin action will globally mute /
unmute all non-admin participants on a converence, while the participant
count simply exposes the existing participant count function to the
conference bridge menu.
This also adds configuration options to change the sound played when the
conference is globally muted / unmuted, as well as the necessary config
hooks to place these functions in the DTMF menus.
(closes issue ASTERISK-18204)
Reported by: Kevin Reeves
Tested by: Matt Jordan
Patches:
app_confbridge.c.patch.txt, conf_config_parser.c.patch.txt,
confbridge.h.patch.txt uploaded by Kevin Reeves (license 6281)
Review: https://reviewboard.asterisk.org/r/1518/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The recent fix for ASTERISK-17288 to get RFC3578 SIP overlap support
working correctly removed a long standing ability to do overlap dialing
using DTMF in the early media phase of a call.
See ASTERISK-18702 it has a very good description of the issue.
I started with Pavel Troller's chan_sip.diff patch on issue
ASTERISK-18702.
* Added 'dtmf' enum value to sip.conf allowoverlap config option. The new
option value causes the Incomplte application to not send anything with
chan_sip so the caller can supply more digits via DTMF.
* Renames SIP_GET_DEST_PICKUP_EXTEN_FOUND to SIP_GET_DEST_EXTEN_MATCHMORE
since that is what it really means.
* Fixed get_destination() inconsistency with the pickup extension
matching.
* Fixed initialization of PAGE3 of global_flags in reload_config().
(closes issue ASTERISK-18702)
Reported by: Pavel Troller
Review: https://reviewboard.asterisk.org/r/1517/
Review: https://reviewboard.asterisk.org/r/1582/
........
Merged revisions 345273 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 345275 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
You can now use the built in variables , , and
within a dynamic weight. For example, this could be useful when you want
to pass requested lookup number to the SHELL() function which could be
used to execute a script to dynamically set the weight of the result.
(Closes issue ASTERISK-13657)
Reported by: Joel Vandal
Tested by: Leif Madsen, Russell Bryant
Patches:
asterisk-1.6-dundi-varhead.patch uploaded by Joel Vandal (License #5374)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were several problems with the dynamic realtime peer/user lookup
code. The lookup logic had become rather hard to read due to lots of
incremental changes to the realtime_peer function. And, during the
addition of the sipregs functionality, several possibilities for memory
leaks had been introduced. The insecure=port matching has always been
broken for anyone using the sipregs family. And, related, the broken
implementation forced those using sipregs to *still* have an ipaddr
column on their sippeers table.
Thanks Terry Wilson for comprehensive testing and finding and fixing
unexpected behaviour from the multientry realtime call which caused
the realtime_peer to have a completely unused code path.
This changeset fixes the leaks, the lookup inconsistenties and that
you won't need an ipaddr column on your sippeers table anymore (when
you're using sipregs). Beware that when you're using sipregs, peers
with insecure=port will now start matching!
(closes issue ASTERISK-17792)
(closes issue ASTERISK-18356)
Reported by: marcelloceschia, Walter Doekes
Reviewed by: Terry Wilson
Review: https://reviewboard.asterisk.org/r/1395
........
Merged revisions 342927 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342929 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r341599 | irroot | 2011-10-20 20:20:08 +0200 (Thu, 20 Oct 2011) | 8 lines
add documentation for check_state_unknown in configs/queues.conf.sample
app_queue allows calls to members in a "Unknown" state to be treated as available
setting check_state_unknown = yes will cause app_queue to query the channel driver
to better determine the state this only applies to queues with ringinuse or ignorebusy
set appropriately.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337775 | russell | 2011-09-22 19:45:35 -0500 (Thu, 22 Sep 2011) | 18 lines
Merged revisions 337774 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337774 | russell | 2011-09-22 19:44:19 -0500 (Thu, 22 Sep 2011) | 11 lines
Comment out entries in sample res_pktccops.conf.
With these options enabled, they can cause Asterisk to freak out by
SYN flooding a network and eating the CPU. Obviously it would be good to
fix the code so that this can't happen, but we can at least change the default
configuration so it doesn't happen.
This was reported downstream to the Fedora issue tracker:
https://bugzilla.redhat.com/show_bug.cgi?id=658431
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337595 | jrose | 2011-09-22 10:35:50 -0500 (Thu, 22 Sep 2011) | 12 lines
Generate Security events in chan_sip using new Security Events Framework
Security Events Framework was added in 1.8 and support was added for AMI to generate
events at that time. This patch adds support for chan_sip to generate security events.
(closes issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (license #5026) by Michael L. Young
Review: https://reviewboard.asterisk.org/r/1362/
........
r337597 | jrose | 2011-09-22 10:47:05 -0500 (Thu, 22 Sep 2011) | 10 lines
Forgot to svn add new files to r337595
Part of Generating security events for chan_sip
(issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (License #5026) by Michael L. Young
Reviewboard: https://reviewboard.asterisk.org/r/1362/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337219 | oej | 2011-09-21 11:32:50 +0200 (Ons, 21 Sep 2011) | 13 lines
Make ast_pbx_run() not default to s@default if extension is not found
Review: https://reviewboard.asterisk.org/r/1446/
This is a bug - or architecture mistake - that has been in Asterisk for a
very long time. It was exposed by the AMI originate action and possibly
some other applications. Most channel drivers checks if an extension
exists BEFORE starting a pbx on an inbound call, so most calls will
not depend on this issue.
Thanks everyone involved in the review and on IRC and the mailing list
for a quick review and all the feedback.
(closes issue ASTERISK-18578)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337178 | oej | 2011-09-21 10:51:41 +0200 (Ons, 21 Sep 2011) | 14 lines
Change strictrtp option to default to yes in the RTP module
Suggested by Kapejod on Facebook
Review: https://reviewboard.asterisk.org/r/1448/
(closes issue ASTERISK-18587)
Thanks for quick feedback to kpfleming and Tilghman
--Denna och nedanstående rader kommer inte med i loggmeddelandet--
M CHANGES
M configs/rtp.conf.sample
M res/res_rtp_asterisk.c
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r336936 | irroot | 2011-09-20 18:51:59 +0200 (Tue, 20 Sep 2011) | 14 lines
Allow Setting Auth Tag Bit length Based on invite or config option
Update the SIP SRTP API to allow use of 32 or 80 bit taglen.
Curently only 80 bit is supported.
The outgoing invite will use the taglen of the incoming invite preventing
one-way audio.
(Closes issue ASTERISK-17895)
Review: https://reviewboard.asterisk.org/r/1173/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336937 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This permits the list of codecs to be specified in one configuration line,
instead of two or more, generally with the aim of either allowing all codecs
with the exception of a few or disallowing most but permitting a few.
Review: https://reviewboard.asterisk.org/r/1411/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a CDR option to cdr.conf that will allow CDR files to log calls ending
with congestion in a way that is unique from other unanswered calls.
(closes issue ASTERISK-14842)
Reported by: Alec Davis
Patches:
cdr_congestion.diff.txt (License #5546) patch uploaded by Alec Davis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines
Merged revisions 332264 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines
Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards.
France Telecom brings layer 2 and layer 1 down on BRI lines when the line
is idle. When layer 1 goes down Asterisk cannot make outgoing calls and
the HA8 and HB8 cards also get IRQ misses.
The inability to make outgoing calls is because the line is in red alarm
and Asterisk will not make calls over a line it considers unavailable.
The IRQ misses for the HA8 and HB8 card are because the hardware is
switching clock sources from the line which just brought layer 1 down to
internal timing.
There is a DAHDI option for the B410P card to not tell Asterisk that layer
1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards:
"modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear
up the IRQ misses when the telco brings layer 1 down.
* Add layer 2 persistence option to customize the layer 2 behavior on BRI
PTMP lines. The new option has three settings: 1) Use libpri default
layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer
brings it down. 3) Leave layer 2 down when the peer brings it down.
Layer 2 will be brought up as needed for outgoing calls.
JIRA AST-598
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332101 | rmudgett | 2011-08-16 12:17:28 -0500 (Tue, 16 Aug 2011) | 140 lines
Merged revisions 332100 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332100 | rmudgett | 2011-08-16 11:31:36 -0500 (Tue, 16 Aug 2011) | 133 lines
Fix multiple parking issues.
JIRA ASTERISK-17183
Multi-parkinglot directs calls to wrong parkinglot.
JIRA ASTERISK-17870
Cannot retrieve parked calls.
JIRA ASTERISK-17430
ParkedCall() with no extension should pickup first available call and does not.
JIRA AST-576
Issues with parking lots
* Removed searching for parking lots by extension. Parking lots can only
be found by the parking lot name since parking lot access extensions and
spaces are not guaranteed to be unique.
* Added parking_lot_name option to the Park and ParkedCall applications.
Updated documentation for Park and ParkedCall applications.
* Add parkext_exclusive configuration option to make parking entry
extensions specify which parking lot they access.
(closes issue ASTERISK-17183)
Reported by: David Cabrejos
Tested by: rmudgett, David Cabrejos
(closes issue ASTERISK-17870)
Reported by: Remi Quezada
(closes issue ASTERISK-17430)
Reported by: Philippe Lindheimer
JIRA ASTERISK-17452
Parking_offset not used
JIRA AST-624
'next' setting for findslot does nothing
* Reimplemented since findslot feature option broken by -r114655.
(closes issue ASTERISK-17452)
Reported by: David Woolley
Tested by: rmudgett
JIRA ASTERISK-15792
Dialplan continues execution after transfer to park.
This happens for DTMF attended transfer, DTMF blind transfer, and DTMF
one-touch-parking if the party initiating these features also initiated
the call.
* Fixed the return code from the affected builtin features when parking a
call.
(closes issue ASTERISK-15792)
Reported by: Mat Murdock
Tested by: rmudgett, twilson
JIRA AST-607
The courtesytone is not playing to the expected call when picking up a
parked call.
This is mostly a documentation problem. However, the option is not reset
to the default when features.conf is reloaded.
* Updated features.conf.sample documentation for courtesytone and
parkedplay options.
* Reset the parkedplay option to default when features.conf is reloaded.
JIRA AST-615
AMI Park action followed by features reload results in orphaned channels
in parking lot.
* Reloading features.conf will not touch parking lots that have calls
still parked in them. Reload again at a later time.
Misc additional fixes:
* Added unit test for parking lot dialplan usage checking.
* Made update connected line when a parked call is retrieved from a
parking lot.
* Made retrieved parked call stop ringing or MOH depending upon how the
call was waiting in the parking lot.
* Made CLI "features show" indicate if the parking lot is enabled for use.
* Added PARKINGDYNEXTEN channel variable to allow dynamic parking lots to
specify the parking lot access extension.
* Made AMI ParkedCalls action ParkedCall events have a Parkinglot header.
* Made AMI ParkedCalls action ParkedCallsComplete event have a Total
header.
* Fixed potential deadlock from AMI Park action holding channel locks
while calling masq_park_call().
* Fixed several places where ast_strdupa() were used inside of loops.
(Mostly fixed by refactoring the loop body into its own function.)
* Fixed copy_parkinglot() copying too much from the source parking lot.
Extracted the parking lot configuration settings into struct
parkinglot_cfg.
* Refactored courtesytone playing code to put the channel not playing the
tone in autoservice.
* Fix when pbx-parkingfailed is played that the other channel is put in
autoservice if it exists.
* Fixed parkinglot reference leak in parked_call_exec() error paths.
* Fixed parkinglot_unref() use of parkinglot after it was unreffed.
* Made destroy the struct ast_parkinglot parkings lock when done.
* Refactored the features.conf parking lot configuration code to eliminate
redundancy.
* Fixed feature reload to better protect parking lots.
* Fixed parking lot container reference leak in handle_parkedcalls().
* Fixed the total count in handle_parkedcalls().
Review: https://reviewboard.asterisk.org/r/1358/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332022 | mnicholson | 2011-08-16 09:40:37 -0500 (Tue, 16 Aug 2011) | 16 lines
In 10 and trunk this option is disabled by default.
Merged revisions 332021 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332021 | mnicholson | 2011-08-16 09:20:43 -0500 (Tue, 16 Aug 2011) | 7 lines
Added the 'storesipcause' option to sip.conf to allow the user to disable the
setting of HASH(SIP_CAUSE,<chan name>) on the channel.
Having chan_sip set HASH(SIP_CAUSE,<chan name>) on the channel carries a
significant performance penalty because of the usage of the MASTER_CHANNEL()
dialplan function.
AST-580
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_queue logs the events ADDMEMBER and REMOVEMEMBER with the agent field set
to the interface value rather than the membername value when a member is added
with a state_interface value set. However all other member related queue
events are logged with the membername when a state_interface is set. This
patch makes these fields optionally more consistent and correct.
(closes issue ASTERISK-14769)
Review: https://reviewboard.asterisk.org/r/1286
Patch-by: Jamuel Starkey
Tested-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331037 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r329952 | seanbright | 2011-07-28 09:03:58 -0400 (Thu, 28 Jul 2011) | 4 lines
The default conf-usermenu says that '8' can be used to leave the conference, so
put that in the sample user menu. '5' is supposed to extend the conference, but
there doesn't appear to be a concept of that in the menu actions.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@329953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r329528 | jrose | 2011-07-26 08:52:34 -0500 (Tue, 26 Jul 2011) | 24 lines
Merged revisions 329527 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r329527 | jrose | 2011-07-26 08:25:35 -0500 (Tue, 26 Jul 2011) | 17 lines
Fixes some voicemail forwarding behavior based around prepend mode.
Formerly, prepend forwarding would have the user record a message with no useful prompt
and an expectation for the user to push a button on the phone when finished recording.
If a length of silence was detected instead, the recording would be canceled and the user
would re-enter the voicemail forwarding menu. Subsequent time-outs in prepend recording
would also bug out in the sense that they would write over the original message and get
sent to the recipient regardless of whether they timed out or were accepted. This patch
fixes this issue and adds a prompt which will be played after a timeout informing the
user that they needed to press a button. Currently, the sound files that we have are
somewhat inadquate for this, so after the call we simply have Allison say "Please try
again. Then press pound." which actually relies on two separate sound files. Just one
would be more appropriate.
reporter: Vlad Povorozniuc
Review: https://reviewboard.asterisk.org/r/1327/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@329530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325935 | rmudgett | 2011-06-30 15:39:45 -0500 (Thu, 30 Jun 2011) | 11 lines
Misc minor changes in chan_sip.
* Add load failure exit if primary SIP container(s) could not get created
in chan_sip.c:load_module().
* Removed a redundant static prototype.
* Some typos.
* Some whitespace.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added general option negative_penalty_invalid default off. when set
members are seen as invalid/logged out when there penalty is negative.
for realtime members when set remove from queue will set penalty to -1.
* Added queue option autopausedelay when autopause is enabled it will be
delayed for this number of seconds since last successful call if there
was no prior call the agent will be autopaused immediately.
* Added member option ignorebusy this when set and ringinuse is not
will allow per member control of multiple calls as ringinuse does for
the Queue.
- Mark QUEUE_MEMBER_PENALTY Deprecated it never worked for realtime members
- QUEUE_MEMBER is now R/W supporting setting paused, ignorebusy and penalty.
(closes issue ASTERISK-17421)
(closes issue ASTERISK-17391)
Reported by: irroot
Tested by: irroot, jrose
Review: https://reviewboard.asterisk.org/r/1119/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319938 | jrose | 2011-05-20 08:28:24 -0500 (Fri, 20 May 2011) | 12 lines
Adds legacy_useroption_parsing to address interoperability concerns.
With the new option engaged, Asterisk should interpret user fields with useroptions
contained within the userfield of the uri by stripping them out of the original message
whenever a semicolon is encountered in the userfield string.
(closes issue #18344)
Reported by: danimal
Tested by: jrose
Review: https://reviewboard.asterisk.org/r/1223/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG.
Add option to specify if and how much of the current time is put in
Q931_IE_TIME_DATE.
* Send date/time ie never.
* Send date/time ie date only.
* Send date/time ie date and hour.
* Send date/time ie date, hour, and minute.
* Send date/time ie date, hour, minute, and second.
* Send date/time ie default: Libpri will send date and hhmm only when in
NT PTMP mode to support ISDN phones.
(closes issue #19221)
Reported by: kenner
JIRA SWP-3396
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318148 | jrose | 2011-05-09 09:18:14 -0500 (Mon, 09 May 2011) | 4 lines
Documenting an observed behavior of features in features.conf. Since parkinglots use an
integer for the parkinglot extensions, leading zeros specified in the configuration file
are ignored.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314628 | mnicholson | 2011-04-21 13:24:05 -0500 (Thu, 21 Apr 2011) | 27 lines
Merged revisions 314620 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r314620 | mnicholson | 2011-04-21 13:22:19 -0500 (Thu, 21 Apr 2011) | 20 lines
Merged revisions 314607 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r314607 | mnicholson | 2011-04-21 13:19:21 -0500 (Thu, 21 Apr 2011) | 14 lines
Added limits to the number of unauthenticated sessions TCP based protocols are allowed to have open simultaneously. Also added timeouts for unauthenticated sessions where it made sense to do so.
Unrelated, the manager interface now properly checks if the user has the "system" privilege before executing shell commands via the Originate action.
AST-2011-005
AST-2011-006
(closes issue #18787)
Reported by: kobaz
(related to issue #18996)
Reported by: tzafrir
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "controlling user number" is always the number of the voice mail box
which is identical with the subscriber number itself. This number which
is listed in the ISDN phone MWI menu cannot be called back to contact the
voice mail box. The controlling user number should be made configurable.
JIRA ABE-2738
JIRA SWP-2846
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add Asterisk Device State information and callbacks to the Call Completion
Supplemental Services for generic agents.
There are currently not many devices that have native support for CCSS.
Even as the devices become available there may be other reasons why one
may choose to not take advantage of the native abilities and stick with
the generic implementation. The generic implementation is quite capable
and could be greatly enhanced by adding device state capabilities. A
phone could then subscribe to the device state with a BLF key in
conjunction with Asterisk hints.
The advantages of the device state information would allow a single button
to: request CCSS, cancel a CCSS request, and display the current state of
a CCSS request.
For example, you may have a single button that when not lit, there is no
active CCSS request. When you press that button, the dialplan can query
the DEVICE_STATE() associated with that caller to determine whether they
should be calling CallCompletionRequest() or CallCompletionCancel(). If
there is currently a pending request, then the dialplan would cancel it.
This also has the advantage of showing the true state of a request, which
is an asynchronous call, even when CallCompletionRequest() thinks it was
successful. The actual request could ultimately fail. Once lit, further
feedback can be provided to the caller about the current state of their
request since it will be updated by the CCSS State Machine as appropriate.
The DEVICE_STATE mapping is configurable since the BLF being used on a
given phone type may vary. The idea is to allow some level of
customization as to the phone's behavior.
As an example, you may want the BLF key to go solid once you have
requested a callback. You may then want the LED to blink (typically
ringing) when either the callback is in process, which is a visual
indication that the incoming call is the desired callback. You may want
it to blink when the callee is ready but you are busy, giving you a visual
indication that the target is available as you may want to get off the
line so that the callback can be successful.
Device state information is sent back via the ast_devstate_prov_add()
callback for any generic CCSS device as it traverses through the state
machine. You simply provide a map between CC_STATE values and the
corresponding AST_DEVICE state values.
You could then generate hints against these states similar to what is
possible today with Custom Devstates or MeetMe states. For example, you
may have an extension 3000 that is currently associated with device
SIP/3000. You could then create a feature code for that extension that
may look something like:
exten => *823000,hint,ccss:sip/3000
You would then subscribe a BLF button to *823000 which would point to the
dialplan that handled CCSS requests/cancels using the available
DEVICE_STATE() information about ccss:sip/3000 to make the decision about
what to do.
(closes issue #18788)
Reported by: p_lindheimer
Patches:
ccss.trunk.18788.patch uploaded by p lindheimer (license 558)
Modified with final reviewboard comments.
Tested by: p_lindheimer, loloski
Review: https://reviewboard.asterisk.org/r/1105/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adding the setvar option with variable substitution on the value allows things
like setting the outbound caller id name to the summary of a calendar event,
etc. Values could be chained together as they are appended in order to do some
scripting if necessary.
Review: https://reviewboard.asterisk.org/r/1134/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The display ie handling can be controlled independently in the send and
receive directions with the following options:
* Block display text data.
* Use display text in SETUP/CONNECT messages for name.
* Use display text for COLP name updates (FACILITY/NOTIFY as appropriate).
* Pass arbitrary display text during a call. Sent in INFORMATION
messages. Received from any message that the display text was not used as
a name.
If the display options are not set then the options default to legacy
behavior.
The arbitrary display text is exchanged between bridged channels using the
AST_FRAME_TEXT frame type.
To send display text from the dialplan use the SendText() application when
the arbitrary display text option is enabled.
JIRA SWP-2688
JIRA ABE-2693
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r305247 | qwell | 2011-01-31 16:25:23 -0600 (Mon, 31 Jan 2011) | 7 lines
Add alternative name for config option.
The SIP sample configuration had "tlscadir" as the option name, but chan_sip
used the more correct "tlscapath". Now both are accepted.
Discovered (sort of) by a user on IRC in #asterisk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303009 | jpeeler | 2011-01-20 11:10:32 -0600 (Thu, 20 Jan 2011) | 21 lines
Merged revisions 303008 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303008 | jpeeler | 2011-01-20 11:07:44 -0600 (Thu, 20 Jan 2011) | 14 lines
Merged revisions 303007 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303007 | jpeeler | 2011-01-20 11:04:08 -0600 (Thu, 20 Jan 2011) | 8 lines
Add new queue strategy to preserve behavior for when queue members moved to ao2.
Add queue strategy called "rrordered" to mimic old behavior from when queue
members were stored in a linked list.
ABE-2707
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the moh_signaling option to specify what to do when the channel's
bridged peer puts the ISDN channel on and off of hold.
Implemented as a FSM to control libpri ISDN signaling when the bridged
peer places the channel on and off of hold with the AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD control frames.
JIRA SWP-2687
JIRA ABE-2691
Review: https://reviewboard.asterisk.org/r/1063/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292787 | lmadsen | 2010-10-22 16:28:43 -0500 (Fri, 22 Oct 2010) | 21 lines
Merged revisions 292786 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292786 | lmadsen | 2010-10-22 16:16:12 -0500 (Fri, 22 Oct 2010) | 13 lines
Update the LDIF file for LDAP.
The LDIF file asterisk.ldif was quite a bit out of date from the asterisk.ldap-schema file, so I've
now updated that to be in sync. The asterisk.ldif file being out of sync was a problem on my systems
where I was doing an ldapadd to import the schema into the LDAP database, and the existing file
would cause problems and ERROR messages when registering.
Additional documention has been added based on feedback in the issue I'm closing.
(closes issue #13861)
Reported by: scramatte
Patches:
ldap-update.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jcovert, suretec, rgenthner
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292050 | tzafrir | 2010-10-16 12:47:00 +0200 (ש', 16 אוק 2010) | 22 lines
Merged revisions 292049 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292049 | tzafrir | 2010-10-16 12:03:04 +0200 (ש', 16 אוק 2010) | 15 lines
Base directory for MOH should be ASTDATADIR
If the directive 'directory' is relative, make it relative to the
datadir, rather than to the varlibdir. In the sample configuration
it is relative ('moh').
This has no effect unless you have actively set the datadir explicitly
(at build time or at run time).
(closes issue #16906)
Patches:
moh_datadir uploaded by tzafrir (license 46)
Review: https://reviewboard.asterisk.org/r/974/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292052 65c4cc65-6c06-0410-ace0-fbb531ad65f3