* Made ast_dtmf_stream() wait after starting the silence generator rather
than before.
* Made ast_dtmf_stream() put the peer in autoservice for the whole time
things are being done to the chan.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373966 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if there are modifications to mailboxes that Asterisk is
not aware of, the user needs to add "pollmailboxes" to their mailbox
configuration, which repeatedly polls the subscribed mailboxes for
changes. This results in a lot of extra work for the CPU. This patch
introduces the AMI command VoicemailRefresh which permits external
applications to trigger the refresh themselves. The refresh can apply
to a specified mailbox only, an entire context, or all configured
mailboxes. Even a refresh performed on every mailbox would not consume
as much CPU as the pollmailboxes option, given that pollmailboxes runs
continuously and this only runs on demand.
(closes issue ASTERISK-17206)
(closes issue ASTERISK-19908)
Reported-by: Jeff Hutchins
Reported-by: Tilghman Lesher
Patch-by: Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an Asterisk module specifies a dependency in ast_module_info.nonoptreq, it
is possible for Asterisk to skip calling the modules's .load function.
Asterisk was loading and linking the module via load_dynamic_module() but was
not adding the module to the resource_heap. Therefore the module was not
initialized based on it's priority along with the other modules in the heap.
Now use load_resource() instead of load_dynamic_module() for non-optional
requirement. This will add the module to the resource_heap so the module can
be properly initialized in the correct order.
This is required if there are any module global data structures initialized in
the .load() callback for the module on platforms which do not support weak
references.
(issue ASTERISK-20439)
Reported by: sruffell
Patches:
0001-loader-Ensure-dependent-modules-are-properly-initial.patch uploaded by sruffell (license 5417)
........
Merged revisions 373909 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373910 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373911 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix previously untested senarios;
1). On queue initialisation set queue_avail devstate to INUSE.
Previously was unavailable, which indicated an agent was available.
2). When removing members, if there are no other members available, set queue_avail to INUSE.
Previously, if a member interface had become 'unavailable', they were never going to be removed, particularly when persistant queues is enabled.
3). When adding a member, check that they are available, if they are set queue_avail to NOT_INUSE.
Previously on reloaded, members may have been 'unavailable'.
4). When pausing or unpausing a member, set appropriate queue availability.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2129/
........
Merged revisions 373804 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373805 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Users of the T.38 API can indicate AST_T38_REQUEST_PARMS on a channel to request that the
channel indicate a T.38 negotiation with the parameters present on the channel. The return
value of this indication is expected to be AST_T38_REQUEST_PARMS upon success but with
chan_local involved this could never occur.
This fix changes chan_local to always return AST_T38_REQUEST_PARMS for this situation. If
the underlying channel technology on the other side does not support T.38 this would have
been determined ahead of time using ast_channel_get_t38_state and an indication would
not occur.
(closes issue ASTERISK-20229)
Reported by: wdoekes
Patches:
ASTERISK-20229.patch uploaded by wdoekes (license 5674)
Review: https://reviewboard.asterisk.org/r/2070/
........
Merged revisions 373705 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373706 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373707 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for the REDIRECTING dialplan function to be
used to set the reason to any string.
The SIP channel driver has been modified to set the redirecting
reason string to the value received in a Diversion header. In
addition, SIP 480 response reason text will set the redirecting
reason as well.
(closes issue AST-942)
reported by Malcolm Davenport
(closes issue AST-943)
reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/2101
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP session timer mechanism contains a mandatory 'refresher' parameter
(included in the Session-Expires header) which is used in the session timer
offer/answer signaling within a SIP Invite dialog. It looks like asterisk is
interpreting the uac resp. uas role only as the initial role of client and
server (caller is uac, callee is uas). The standard rfc 4028 however assigns
the client role to the ((RE)-Invite) requester, the server role to the
((RE)-Invite) responder.
This patch has Asterisk track the actual refresher as "us" or "them" as opposed
to relying on just the configured "uas" or "uac" properties.
(closes issue AST-922)
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/2118/
........
Merged revisions 373652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373665 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373690 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes get_agi_cmd so that the return can be checked
to differentiate between an empty list success and something that
triggered an error. This in turn allows launch_asyncagi to detect
these errors and break free from the command processing loop so
that the async agi can be ended more cleanly
(closes issue ASTERISK-20109)
Reported by: Jeremiah Gowdy
Patches: jgowdy-7-9-2012.diff uploaded by Jeremiah Gowdy (license 6358)
(Modified by me to fix some logical issues and apply to trunk)
Review: https://reviewboard.asterisk.org/r/2117/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When sending RTP packets via multicast the amount of data sent is stored in a variable and returned
from the write function. This is incorrect as any non-zero value returned is considered a failure while
a return value of 0 is success. For callers (such as ast_streamfile) that checked the return value
they would have considered it a failure when in reality nothing went wrong and it was actually a success.
The write function for the multicast RTP engine now returns -1 on failure and 0 on success, as it should.
(closes issue ASTERISK-17254)
Reported by: wybecom
........
Merged revisions 373550 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373551 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373552 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When setting CALLERID(pres)=unavailable in the dialplan, the From header
in the SIP message contains "Anonymous" <sip:Anonymous@anonymous.invalid>.
For consistency, Asterisk should use a lowercase a in the userpart of the
URI.
* Make the From header use a lowercase A in the userpart of the anonymous
URI.
(closes issue ASTERISK-19838)
Reported by: Antti Yrjola
Patches:
chan_sip_patch_ASTERISK-19838.patch (license #6383) patch uploaded by Antti Yrjola
........
Merged revisions 373500 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373501 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373502 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk v1.8 and later was not as vulnerable to this issue.
* Made find_call() lock each private as it processes the found dialogs.
(Primary cause of ABE-2876)
* Made the other functions that traverse the dialogs container lock each
private as it examines them.
* Fix race condition in sip_call() if the thread that sent the INVITE is
held up long enough for a response to be processed. The p->initid for the
INVITE retransmission could be added after it was canceled by the response
processing.
* Made __sip_destroy() clean up resource pointers after freeing. This is
primarily defensive in case someone has a stale private pointer.
* Removed redundant memset() in reqprep(). The call to init_req() already
does the memset() and is the first reference to req in reqprep().
* Removed useless set of req.method in transmit_invite(). The calls to
initreqprep() and reqprep() have to do this because they memset() the req.
JIRA ABE-2876
..........
Merged -r373423 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 373424 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373466 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373469 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If conditions were right it was possible for both the PBX core and chan_sip to deadlock by both having a lock that the other
wants. In the case of the PBX core it had the contexts lock and wanted a SIP dialog lock, while in the case of chan_sip it
had the SIP dialog lock and wanted the contexts lock.
This fix unlocks the SIP dialog before getting the extension state so that the other thread will not block on trying to lock
it. Once the extension state is retrieved the SIP dialog is locked again and life carries on.
As the SIP dialog is reference counted it is not possible for it to go away after unlocking.
(closes issue ASTERISK-20437)
Reported by: jhutchins
........
Merged revisions 373438 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373440 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373454 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The H.264 format attribute module compares two format attribute structures to determine if they are
compatible or not. In some instances it was possible for this check to determine that both structures
were incompatible when they actually should be considered compatible. This check has now been made even
more permissive by assuming that if no attribute information is available the two structures are compatible.
If both structures contain attribute information a base level comparison of the H.264 IDC value is done to
see if they are compatible or not.
The above issue uncovered a secondary issue in chan_sip where the SDP being produced would be incorrect if
the formats were considered incompatible. This has now been fixed by checking that all information required
to produce the SDP is available instead of assuming it is.
(closes issue ASTERISK-20464)
Reported by: Leif Madsen
........
Merged revisions 373413 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes the turnport configuration property and changes the
turnaddr property to be a combined host[:port] configuration string. The
patch also modifies the documentation in the example configuration to
reflect the property changes and adds some additional text indicating how
the STUN port is configured.
(closes issue ASTERISK-20344)
Reported by: beagles
Tested by: beagles
Review: https://reviewboard.asterisk.org/r/2111/
........
Merged revisions 373403 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This annoying update is almost totally whitespace and updated config comments. I did add Python to the documented file types.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Doxygen updates including mistakes, misspellings, missing parameters, updates for Doxygen style. Some missing txt file links are removed but their content or essense will be included in some later updates. A majority of the txt files were removed in the 1.6 era but never noted. The HR and EXTREF are simple changes that make the documentation more compatable with more versions of Doxygen.
Further updates coming.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
janitor cleanup. No functional change.
1). ast_dsp_call_progress: use 'short samp' instead of s[x] inside loop.
apply same casting as other _init, dsp->energy = (int32_t) samp * (int32_t) samp
2). ast_dtmf_detect_init: move repeated setting of s->energy to outside of loop.
do goertzel_init loop first before setting s->lasthit and s->current_hit, consistant with ast_dsp_digitreset()
3). ast_mf_detect_init:
do goertzel_init loop first before setting s->hits[] and s->current_hit, consistant with ast_dsp_digitreset()
4). Don't chain init different variables, as the type may change
Review https://reviewboard.asterisk.org/r/2107/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using the 'e' or 'E' option to MeetMe the configured conference bridges are loaded and examined to see
if any are empty. If no conference bridges are empty the caller is prompted to enter the number of one.
This operation left around a pointer to the last created conference bridge still containing participants.
When the caller that was not able to find any empty conference bridge hung up this pointer was disposed of
and the reference count of the conference bridge decremented. If there was only a single participant in the
conference bridge it was ultimately destroyed prematurely.
(closes issue AST-994)
Reported by: John Bigelow
........
Merged revisions 373242 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373245 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373246 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373247 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
app_queue: Support an 'agent available' hint
Sets INUSE when no free agents, NOT_INUSE when an agent is free.
modifes handle_statechange() scan members loop to scan for a free agent
and updates the Queue:queuename_avial devstate.
Previously exited early if the member was found in the queue.
Now Exits later when both a member was found, and a free agent was found.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2121/
~~~~
Support all ways a member can be available for 'agent available' hints
Alec's patch in r373188 added the ability to subscribe to a hint for when
Queue members are available. This patch modifies the check that determines
when a Queue member is available by refactoring the availability checks in
num_available_members into a shared function is_member_available. This
should now handle the ringinuse option, as well as device state values
other than AST_DEVICE_NOT_INUSE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Alec's patch in r373188 added the ability to subscribe to a hint for when
Queue members are available. This patch modifies the check that determines
when a Queue member is available by refactoring the availability checks in
num_available_members into a shared function is_member_available. This
should now handle the ringinuse option, as well as device state values
other than AST_DEVICE_NOT_INUSE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* ASTERISK-20383
Missing named call pickup group features:
CHANNEL(callgroup) - Need CHANNEL(namedcallgroup)
CHANNEL(pickupgroup) - Need CHANNEL(namedpickupgroup)
Pickup() - Needs to also select from named pickup groups.
* ASTERISK-20384
Using the pickupexten, the pickup channel selection could fail even though
there was a call it could have picked up. In a call pickup race when
there are multiple calls to pickup and two extensions try to pickup a
call, it is conceivable that the loser will not pick up any call even
though it could have picked up the next oldest matching call.
Regression because of the named call pickup group feature.
* See ASTERISK-20386 for the implementation improvements. These are the
changes in channel.c and channel.h.
* Fixed some locking issues in CHANNEL().
(closes issue ASTERISK-20383)
Reported by: rmudgett
(closes issue ASTERISK-20384)
Reported by: rmudgett
(closes issue ASTERISK-20386)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2112/
........
Merged revisions 373220 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the patch to handle arbitrary SDP stream arrangements went into
Asterisk, it also included an ability to transparently decline unknown
stream types. The scanf calls used were not checked properly causing
this part of the functionality to be broken.
(closes issue ASTERISK-20203)
........
Merged revisions 373211 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Before this, attempting to unload res_curl.so would warn you about the first
module it found that was dependent. We now warn about all of the loaded modules
instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sets INUSE when no free agents, NOT_INUSE when an agent is free.
modifes handle_statechange() scan members loop to scan for a free agent
and updates the Queue:queuename_avial devstate.
Previously exited early if the member was found in the queue.
Now Exits later when both a member was found, and a free agent was found.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2121/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373188 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to use nested functions on some versions of GCC (e.g. GCC on OS X),
the -fnested-functions flag must be passed to the compiler. This patch adds
detection logic to ./configure to add the flag if necessary. It also adds
a comment to utils.h as to why the nested function needs a prototype.
(closes issue ASTERISK-20399)
Reported by: David M. Lee
Review: https://reviewboard.asterisk.org/r/2102/
........
Merged revisions 373119 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373120 65c4cc65-6c06-0410-ace0-fbb531ad65f3