This commit switches the RaspberryPi arch over to probe Barebox
from the builtin DT and enables multi-image builds.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This machine was a prototype and was never shipped to customers.
Since it has no dependencies to any image, it can be removed.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for ZII VF610 Dev based designs such as:
- VF610 Dev, revision B
- VF610 Dev, revision C
- CFU1, revision A
- SPU3, revision A
- SCU4 AIB, revision C
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the QuadPlus variant of the board as a separate
Barebox binary.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Auvidea H100 is a baseboard for the SolidRun MicroSOM, which
provides HDMI IN/OUT capabilities.
Currently supported is only a combination of the H100 baseboard
with a i2eX MicroSOM.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OnRISC Baltos devices are based on a am335x SoC and can be booted
either from MMC or NAND.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
kwboot knows how to work with an image for a different boot medium now.
So there is no reason to generate a dedicated UART image any more.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Vincell boards do the SDRAM setup from board init code, so the
image size is limited to the internal SRAM size. To overcome this
limitation use the NAND xload support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Makefile compression commands all append the size of the
uncompressed image. With CONFIG_IMAGE_COMPRESSION_NONE simply
'shipped' is used which does not append the size. Add and use
a special comp_copy function which adds the size. This helps
us to get the uncompressed image size in the startup code later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The phyCORE-RK3288 aka PCM-059 is a SoM (System on Module)
containing a RK3288 SoC. The module can be connected to different
carrier boards.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that the MAX variant of the board is also supported by the
same code, rename the board directory to the more generic nitrogen6.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since images without the extra header now boot correctly, stop adding
it. This makes the image 512 bytes smaller.
It also gives the image a correct barebox header. The 512 byte extra
header looked like a barebox header (had a "barebox\n" signature) but
had incorrect size and text start fields.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for phyBOARD-SUBRA-i.MX6 with phyFLEX-i.MX6 Quad 1GiB on one
bank. This patch factors out the common device tree nodes for the Quad
and Solo variant into 'imx6qdl-phytec-phyboard-subra.dtsi'.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6q variant is basically the same as the i.MX6dl variant, just
with another SoC and the usual i.MX6q/i.MX6dl adjustments.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
v7: eof whitespace fixes
A Patch for supporting the Terasic DE0 NANO-SoC with barebox.
The pretty similar Socrates Board was taken as a starting point with pulling
in the memory timings/pinmux from
http://rocketboards.org/foswiki/view/Documentation/AtlasSoCCompileHardwareDesign
Signed-off-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pass the config file to cmd_imx_image as arguments to make it more
flexible. Also add the possibility for another arg containing additional
options.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The imx-image tool can now generate signed images itself, so we can
switch to this mechanism:
- Move the CSF templates to header files which can be included by the
flash config files
- remove images/Makefile.imxhabv4 which is no longer necessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently only second stage booting from the vendor U-Boot is tested. I
don't want to flash barebox into NAND yet because UART-booting for
recovery doesn't work for me.
Working so far are:
- UART
- networking
- nand flash
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also move the initcall to the level matching the name of the
function.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for phyFLEX-i.MX6 DualLite 1GiB on one bank with NOR.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for phyFLEX-i.MX6 Solo with 128MB and 256MB RAM on one
memory bank.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for phyFLEX-i.MX6 Quad 512MiB RAM on one bank.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>