With this kallsyms finally start working at least on ARM. This
enables us resolving addresses into symbols which is particularly
useful in combination with stack unwinding support. As kallsyms
now compile and work we can remove the depends on BROKEN.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the documentation does always claim to be version 1. We add
the revision plus the git version to the manual.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
this will allow each arch to handle the boards more simply and depending on
there need
the env var BOARD will refer to the current board dirent
for sandbox as we have only one board the board dirent is arch/sandbox/board
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As a side effect don't build barebox.S when barebox.bin is updated. I
didn't manage to keep the old behaviour and I consider it cleaner this
way.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On x86 'objdump' does not know which parts of the image are 16 bit code and
32 bit. As the default is 32 bit, it will output garbage from the 16 bit parts
(due to 16/32 bit ops are sharing the same opcodes).
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adjust the asm symlink support so we do not create the
symlink unless really needed.
We check the precense of include/asm-$ARCH by checking
for the system.h file. We may end up with a stale directory
so it is not enough to check if the directory is present.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Oh, dear dad, can you see me now
I am myself, like you somehow
Ill ride the wave where it takes me
Ill hold the pain...
Release me...
Ohh...ohh...ohh...ohh...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When changing the board it is necessary to change the symlink
from include/config.h to the new board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[Patch 04/17] U-Boot-V2:ARM: Remove unwanted flags from Makefile
CFLAGS: "-D __ARM__" should have been "-D__ARM__". this breaks sparse check.
Further -nostdinc in Makefile is redfined by
commit ID:847934bc960ba1588c87e283118318dfdd78d4c0
This is unecessary as NOSTDINC_FLAGS defines it
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
Added two targets to the toplevel Makefile : docs and htmdocs.
Further output formats might be added later (PDF, TeX, ...) and
wrapped by the docs target.
Signed-off-by: Carsten Schlote <c.schlote@konzeptpark.de>
This patch improves the default environment handling, now the makesystem
bails out if the default environment path is empty or points to an
invalid directory (with activated default environment). It also fixes
this error:
find: invalid predicate `'
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
fixes:
[mkl@octopus:~/pengutronix/pii-bf/u-boot-v2]$ make TAGS
MAKE TAGS
find: security/selinux: No such file or directory
find: security/selinux: No such file or directory
find: security/selinux: No such file or directory
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
a generic linker script to arch/arm/lib/u-boot.lds.S.
If a board wants to overwrite a linker script it can do
so using CONFIG_BOARD_LINKER_SCRIPT.
There is no generic linker script for ppc and blackfin
yet, so still use the board specific one.
This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
quite similar and share the same board directory "prodrive/p3mx"
and the same config file "p3mx.h".
Signed-off-by: Stefan Roese <sr@denx.de>
PREREQUISITE PATCHES:
* This patch can only be applied after the following patches have been applied:
1) DNX#2006090742000024 "Add support for multiple I2C buses"
2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
CHANGELOG:
* Add support for the Freescale MPC8349E-mITX reference design platform.
The second TSEC (Vitesse 7385 switch) is not supported at this time.
Signed-off-by: Timur Tabi <timur@freescale.com>
Add atstk1002_config target to Makefile and move the AVR32 section
down below Blackfin so that it doesn't end up in the middle of
MIPS.
Drop the autogenerated linker script thing for now. Will have to
revisit how to handle chips with different flash and RAM layout
later.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Patch by Haavard Skinnemoen, 06 Sep 2006
This patch adds support for the AT32AP CPU family and the AT32AP7000
chip, which is the first chip implementing the AVR32 architecture.
The AT32AP CPU core is a high-performance implementation featuring a
7-stage pipeline, separate instruction- and data caches, and a MMU.
For more information, please see the "AVR32 AP Technical Reference":
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
In addition to this, the AT32AP7000 chip comes with a large set of
integrated peripherals, many of which are shared with the AT91 series
of ARM-based microcontrollers from Atmel. Full data sheet is
available here:
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
This patch adds common infrastructure code for the Atmel AVR32
architecture. See doc/README.AVR32 for details.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Add support for PPC440EPx & PPC440GRx
- Add support for PPC440EP(x)/GR(x) NAND controller
in cpu/ppc4xx directory
- Add NAND boot functionality for Sequoia board,
please see doc/README.nand-boot-ppc440 for details
- This Sequoia NAND image doesn't support environment
in NAND for now. This will be added in a short while.
Patch by Stefan Roese, 07 Sep 2006
Modifications are based on the linux kernel approach and
support two use cases:
1) Add O= to the make command line
'make O=/tmp/build all'
2) Set environement variable BUILD_DIR to point to the desired location
'export BUILD_DIR=/tmp/build'
'make'
The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'
Command line 'O=' setting overrides BUILD_DIR environent variable.
When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
Sascha Hauer
Jean-Christophe PLAGNIOL-VILLARD
Antony Pavlov
Marc Kleine-Budde
Krzysztof Halasa
Robert Schwebel
Uwe Kleine-König
Juergen Beisert
Juergen Beisert
Nishanth Menon
Carsten Schlote
Wolfram Sang
sascha
Sascha Hauer
Robert Schwebel (Laptop)
Wolfgang Denk
Wolfgang Denk
Heiko Schocher
Bartlomiej Sieka
Stefan Roese
Kim Phillips
Dave Liu
Timur Tabi
Tanya Jiang
Ben Warren
Haavard Skinnemoen
Marian Balakowicz
Jon Loeliger
Wolfgang Denk