A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A printf in the driver should be dev_* and contain useful information.
Both is not the case, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver didn't work well with at24 driver. NACKS are lost.
Errors are lost in isr due to the local variable err. Also we didn't wait for
bus free in omap_i2c_xfer_msg.
Fix issues and get other improvements from linux kernel
Tested on OMAP4 and AM335x
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit f64ed12b accidentally swap fclk_rate from am33xx and omap3.
Revert this change.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the call of the cpu_is_* functions completely
and uses id_tables instead.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added device register functions and cpu_is_am33xx()
function.
Adapted the i2c-omap driver. AM335x has a lower
clock rate and the timeout of polling the isr function
had to be increased.
Based on a patch from Shravan Kumar <shravan.k@phytec.in>.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cpu_is_omap2430() is set when CONFIG_ARCH_OMAP is enabled.
This fits for all OMAP/AM33xx boards supported in barebox.
Cleaned up all conditions that use the cpu_is_omap2430().
Also removed some unused defines.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can show the this of i2c busses
set the bus device as parent of all devices.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A function to calculate the frequency divider and digital filter sampling rate
for the 85xx processors is added to the i2c-imx driver. Hence, this driver is
usable on IMX and 85xx machines.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The IMX i2c driver is to be used by SOCs on both the ARM and PPC architetures.
Use a more neutral name for the structure, function names and #define.
The driver name is now "i2c-fsl".
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Although the driver could work on this hardware, i.MX1 support
currently lacks the necessary clocks resulting in linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added i2c support for omap4. Tested on pcm049.
Driver based on linux kernel implementation.
Also added a shift to access 16-bit registers
to make support for OMAP730/850 possible.
If accessing a non existing slave the bus will go into arbitration mode.
It's unable to recover from it.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Modified the i2c_imx driver to support data-only transfers, without
command byte. This allows to construct more complex i2c transfers
and support non genuine devices like Atmel ATxx secure memory, where the
master reads data after a write command.
Signed-off-by: Rosen Kolev <rosen.kolev@amk-drives.bg>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
strange behaviour was observed with actual driver : bus lock, probe of
absent adresses, wrong data read.
This patch sync the driver with linux's one and after a few tests, we
don't see anymore strange behaviour (tested on i.MX27).
Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Makes sure that the STOP condition is transmitted before the I2C
controller is disabled.
This fixes a problem where writing to an external EEPROM was not working
because the EEPROM waits until the STOP before initiating the write
internally.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Antony Pavlov
Lucas Stach
Jan Weitzel
Teresa Gámez
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Renaud Barbier
Alexander Aring
Rosen Kolev
Eric Bénard
Marc Reilly