This adds pinctrl drivers for Marvell Dove and Kirkwood SoCs based
on a common driver stub. This design is based on the corresponding
Linux driver and should ease additional drivers for Marvell Armada
SoCs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can reuse the Tegra30 pinctrl driver, as the bit
layout is the same. Just add the pin and drivegroups
and some compile-time magic to avoid bloat.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Access pin and drivegroups through a drvdata pointer.
This allows to insert other groups for SoCs with a
similar bit layout easily.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These are special groups to configure pad properties
such as drive strength and slew rate for a group of
pads.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a devicenode has invalid pinctrl settings then printing the
offending node helps debugging it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of requiring a device pointer, add a functions to select
the pinctrl state based on a device node.
The AM33xx cpsw devicetree description has several subdevices with
pinctrl information attached to them. In barebox we do not handle
the subdevices as distinct devices, so the pinctrl is never configured
correctly and the mdio bus subdevice stops working. This patch makes
it possible to configure the pinctrl without having a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no much sense in having the pinctrl drivers be user selectable
as all arches using on of them already selects the right one.
So to avoid presenting the user with the choice to enable unrelated
pinctrl drivers or pushing lots of dependencies into the Kconfig just
drop the configurability.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To start synchronizing OF API of barebox with linux OF API, this adds
a length pointer to of_find_property. Also all current users of that
function are updated to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
The pinctrl support is devicetree only, so only register it
when we actually have a devicetree. Otherwise we crash boards
using the iomux-v3 from platform code in pinctrl_register().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a pinctrl driver for the Tegra 20 line of SoCs. It only
supports the three basic pinconfiguration settings function mux,
tristate control and pullup/down control.
The driver understands the same devicetree bindings as the Linux one,
unimplemented pinconfiguration options will be ignored.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the iomux-v3 (found on i.MX25,35,51,53,6) to pinctrl
support. The old SoC specific API is kept for compatibility. The
pinctrl devicetree support is enabled automatically when OFDEVICE
support is available.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a massively stripped down pinctrl support. The upper API
consists of only of:
int pinctrl_select_state(struct device_d *dev, const char *state);
This is used to setup the pinmux for a device to a certain state.
This function normally does not need to be called manually. The
device core will setup the default state before probing a device.
The pinctrl core has the job of handling the devicetree. It parses
the pinctrl phandles for a device from devicetree, finds the correct
pinctrl device and calls its set_state callback with the pinctrl
setup device node.
The simplicity of this pinctrl framework comes from the fact that
we:
- Limit usage to devicetree only for now. For non devicetree use the
old legacy SoC specific APIs still can be used.
- Do not parse the devicetree into internal data structures which
are used by the drivers later. This adds the overhead that we
may parse the devicetree multiple times for more dynamic setups,
but on the other hand we do not need to parse devices from the
devicetree we don't use in barebox
- Do not detect resource conflicts. Since the framework mainly is
a devicetree parser this would be hard to implement. It should
be easy for board maintainers to avoid resource conflicts though.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sebastian Hesselbarth
Lucas Stach
Sascha Hauer
Beniamino Galvani
Jan Weitzel
Lucas Stach