Returning other values causes problems for client code which wants to
perform calculations with the returned value.
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since 2011 barebox' of_device_id struct uses unsigned long type for data field:
struct of_device_id {
char *compatible;
unsigned long data;
};
Almost always struct of_device_id.data field are used as pointer
and need 'unsigned long' casting.
E.g. see 'git grep -A 4 of_device_id drivers/' output:
drivers/ata/sata-imx.c:static __maybe_unused struct of_device_id imx_sata_dt_ids[] = {
drivers/ata/sata-imx.c- {
drivers/ata/sata-imx.c- .compatible = "fsl,imx6q-ahci",
drivers/ata/sata-imx.c- .data = (unsigned long)&data_imx6,
drivers/ata/sata-imx.c- }, {
Here is of_device_id struct in linux kernel v4.0:
struct of_device_id {
char name[32];
char type[32];
char compatible[128];
const void *data;
};
Changing of_device_id.data type to 'const void *data' will increase
barebox' linux kernel compatibility and decrease number of 'unsigned
long' casts.
Part of the patch was done using the 'coccinelle' tool with the
following semantic patch:
@rule1@
identifier dev;
identifier type;
identifier func;
@@
func(...) {
<...
- dev_get_drvdata(dev, (unsigned long *)&type)
+ dev_get_drvdata(dev, (const void **)&type)
...>
}
@rule2@
identifier dev;
identifier type;
identifier func;
identifier data;
@@
func(...) {
<...
- dev_get_drvdata(dev, (unsigned long *)&type->data)
+ dev_get_drvdata(dev, (const void **)&type->data)
...>
}
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A 74x164 shift register can be seen as a SPI attached GPIO expander.
This adds a driver for those poor-man expanders based on the Linux
driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With support for deferred probing, we can now relax driver
registration for Marvell Orion GPIO driver from postcore_initcall()
to normal platform_driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
GPIO drivers can be registered quite late in registration process
causing dependant devices to fail probing. If we know gpio_get_num
will be called with a non-NULL device, return -EPROBE_DEFER instead
of -ENODEV to allow re-probing later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver provides common support for accessing
the CBUS FPGA I2C lines through the gpio library.
Additional i2c bitbang driver must be enabled
in order to use the functionality of the i2c controller.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tegra is DT only, so remove platform code.
While at it remove unused struct.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rework the current framework so that I/O mapped I/O resources are
also possible.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver is dts-only version of driver from Linux v3.14-rc5.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch updates the CLPS711X GPIO driver.
The update adds support for use with devicetree and
optimizes "probe" a bit.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If an error occured during gpio_request_array() then we can
get not requested gpio with nonempty garbage "label" field
value. Afterward the "gpiolib" command can try to use this
nonempty garbage value.
This patch prevents this error situation.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Just copy gpiod_request() function logic from linux-v3.13-rc7.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds devicetree probe support for the OMAP gpio ports and
also makes sure the corresponding platform_devices don't get
registered when they are already present from devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also import related functions gpio_request_one() and
gpio_free_array().
This commit imports code from linux 3.7 as
the more recent linux kernel versions use gpiolib descriptors,
see this commit for details:
commit 372e722ea4dd4ca11c3d04845e11cbc15f32144c
Author: Alexandre Courbot <acourbot@nvidia.com>
Date: Sun Feb 3 01:29:29 2013 +0900
gpiolib: use descriptors internally
Make sure gpiolib works internally with descriptors and (chip, offset)
pairs instead of using the global integer namespace. This prepares the
ground for the removal of the global gpio_desc[] array and the
introduction of the descriptor-based GPIO API.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
See linux.git/include/linux/gpio.h and
linux.git/Documentation/gpio.txt for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a callback function to read the current state of a GPIOs
in/out direction.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds some more printf information to gpiolib command, like the
gpiochip handling a specific gpio. Also, current direction and value
of the gpio are printed, if the gpiochip provides the corresponding
callbacks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a DT only driver for the GPIO controller found on Marvell
Orion/MVEBU SoCs (Armada 370/XP, Dove, Kirkwood, MV78x00, Orion5x).
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX gpio driver doesn't have dependencies, so initialize
it in a core_initcall to have the gpio functions available earlier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Patch adds gpio_to_desc helper for validate GPIO.
A bit optimization is performed (about -160 bytes on ARM).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rename "drivers/gpio.c" to "drivers/gpiolib.c".
Reason is for understand functionality of driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linux kernel, simplified and reworked to match barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jan Luebbe
Sascha Hauer
Antony Pavlov
Sebastian Hesselbarth
Holger Schurig
Lucas Stach
Michel Stam
Alexander Shiyan