Commit 6638760c22
("ARM: mvebu: Enable PUP register")
correctly enables devices that are disabled after boot-up due to
some Design For Testability registers.
However, although harmless on Armada 370, call the code conditionally
on Armada XP only. While at it, move PUP register defines to SYSCTL
registers where they belong to.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marvell Armada XP MV78230-A0 incorrectly identifies itself as MV78460.
Check number of CPUs in FABRIC_CONF and fixup PCIe DEV_ID when it is
2 CPUs instead of 4.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To prepare PCIe device id fixups, move PCIe register defines
to a common location.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Registering mbus driver as platform driver is a little late for
some register accesses to work. We have to make sure boot-up
mbus windows are disabled early, so call mbus driver directly
from SoC init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Prior converting mbus driver from a platform device back to directly
called SoC driver, drop the device_d reference and covert dev_foo to
pr_foo.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marvell Armada 370 and XP have some coherency fabric. We are not
interested in using it, so remove checking for it in mbus driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a driver for SPI master by GPIO pins.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Bitbang helpers for SPI require spidelay. This should be set
by the user and not the helper itself. Move it to ath79_spi
instead.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A 74x164 shift register can be seen as a SPI attached GPIO expander.
This adds a driver for those poor-man expanders based on the Linux
driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Marvell 88E1318S Gigabit Ethernet PHY.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The board code uses quite a few OF functions and it doesn't seem
reasonable to run this board without DT support.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a flags argument to the of_find_path() function. The only flag
defined for now is OF_FIND_PATH_FLAGS_BB. When used on NAND devices, the
function returns the bad block aware device (the ".bb" device).
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the trailing newline "\n" from the ubi/cdev.c debug
messages, as the macro ifself already adds a newine.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch factors out the wait-for-key-press loop from the shell command
"timeout" into a sparate file, so that it can be used from C, too.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the option '-t', as it's unhandled in the code since it was
added to barebox.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix a bug in fpgamgr_program_write_buf() where .rbf file whose length
is not a multiple of 4 would cause an integer overflow which would
result in infinite loop.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The board code uses quite a few OF functions and it doesn't seem
reasonable to run this board without DT support.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With support for deferred probing, we can now relax driver
registration for Marvell Orion GPIO driver from postcore_initcall()
to normal platform_driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Free requested GPIOs on unregistration of mono-, bi-, and tri-color
GPIO leds.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on this linux kernel commit:
commit 0ce4bc1dbdd911ae1763e2d4ff36bd1b214a59f7
Author: Chen-Yu Tsai <wens@csie.org>
Date: Mon Sep 1 22:28:13 2014 +0800
i2c: mv64xxx: continue probe when clock-frequency is missing
The "clock-frequency" DT property is listed as optional, However,
the current code stores the return value of of_property_read_u32 in
the return code of mv64xxx_of_config, but then forgets to clear it
after setting the default value of "clock-frequency". It is then
passed out to the main probe function, resulting in a probe failure
when "clock-frequency" is missing.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
According to this patch by Holger Schurig:
f1f532084a commands: harmonize in-barebox documentation
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise compilation may fail with:
include/fdt.h:11:15: error: unknown type name 'uint64_t'
static inline uint64_t fdt64_to_cpu(uint64_t x)
include/of.h:22:19: error: field 'list' has incomplete type
struct list_head list;
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the LIST_HEAD of_partition_list and a struct definition from
the code. This was present but unused, since the file was added to barebox.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There should be no reason to ever change the data pointed to by id_table
or of_compatible. So make this offical by adding some 'const's.
In Linux the corresponding pointers are marked as const, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev->priv is for private use of the device driver, so do not
use it in the pci core. Instead, introduce a id field in struct
pci_device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
GPIO LEDs can suffer from deferred probing due to failing gpio request.
Instead of registering each gpio led independently, pre-allocate an
array of struct gpio_led for all and tear it down properly if probing
of one leds fails. While at it, silence error messages on -EPROBE_DEFER.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With deferred probing, -EPROBE_DEFER is not worth spilling an error.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
GPIO drivers can be registered quite late in registration process
causing dependant devices to fail probing. If we know gpio_get_num
will be called with a non-NULL device, return -EPROBE_DEFER instead
of -ENODEV to allow re-probing later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As expected, we would need deferred probing sooner or later. This is
a first approach to allow devices to return -EPROBE_DEFER and get
sorted into a list of deferred devices that will be re-probed later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When working with non-coherent transfer buffers, we have to sync
device and cpu for outgoing and incoming buffers. Fix the driver where
non-coherent buffers are used in device context.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds high assurance boot support (HABv4) image generation to
barebox, currently tested on i.MX6 only.
In order to build a signed barebox image, add a new image target to
images/Makefile.imx as illustrated in the diff below:
- - - a/images/Makefile.imx
+ + + b/images/Makefile.imx
@@ -163,10 +163,14 @@ image-$(CONFIG_MACH_SABRELITE) += barebox-freescale-imx6dl-sabrelite.img
pblx-$(CONFIG_MACH_SABRESD) += start_imx6q_sabresd
CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-header-mx6-sabresd.imxcfg
FILE_barebox-freescale-imx6q-sabresd.img = start_imx6q_sabresd.pblx.imximg
image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd.img
+CSF_start_imx6q_sabresd.pblx.imximg = $(havb4_imx6csf)
+FILE_barebox-freescale-imx6q-sabresd-signed.img = start_imx6q_sabresd.pblx.imximg.signed
+image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd-signed.img
+
Here the default i.MX6 CSF file $(havb4_imx6csf) is used, it's generated during
build on from the template "scripts/habv4/habv4-imx6.csf.in". You can configure
the paths to the SRK table and certificates via: System Type -> i.MX specific
settings -> HABv4 support.
The proprietary tool "cst" by Freescale tool is expected in the PATH.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Winbond W25Q128FVSSI chip is used in Black Swift board,
(see http://www.black-swift.com for details).
Black Swift can run barebox for TP-LINK MR3020.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the code to correctly handle 'cs_change' field in 'struct
spi_transfer'(base on the similar code from altera_spi.c)
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the clko pins are general purpose clock outputs. Add support for them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>