Commit 03b59bdb64 changed the
return values of dev_add_param_* to ERR_PTR(-ENOSYS) and broke a few boards.
We have now to care about the return value of dev_add_param_bool() in
mci_register().
Also set the ret variable when dev_add_param_bool() fails.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Simplify PIO mode routines.
Fix a bug when IO is possibly performed twice because of using old
interrupt status.
Support for slow-speed card writes.
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This better separates the DMA from the MMU functionality.
Also move all drivers that only depends on asm/mmu.h for the alloc
functions over to the common header.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As a lot drivers currently rely on the 1:1 virt->phys mapping on ARM
we define DMA_ADDRESS_BROKEN to mark them. In order to use them on
other architectures with a different mapping they need proper fixing.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to have fixed device names for the SDMMC
controllers.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add device tree compatibles and allow retrieving data from device tree
instead of platform_data only.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This helps with EMMC detection when booting from EMMC directly.
Taken from u-boot.
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Parts of the driver need these regardless of whether CONFIG_MCI_INFO
is set, so add these fields unconditionally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The reset default of this register has changed on i.MX6sx. Explicitly
write the value we want to have to make it work on i.MX6sx.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This got lost during bd1bf53b34
(mci: imx-esdhc: factor out common sdhci registers). Seems the PIO
option isn't too heavily used.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch is based on linux kernel commit
commit e1b8513d21845fbeb93d6d2c4973db874385059f
Author: Robert P. J. Day <rpjday@crashcourse.ca>
Date: Sun Feb 3 15:14:02 2008 +0200
Typoes: "whith" -> "with"
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The controller is similar enough to the ones found
on earlier generation SoCs to not need any additional
changes.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no need to check the card-detect status
for non-removable devices.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Needed for SD cards connected to sdmmc1 or sdmmc3
to work properly.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Missed OR, so we never enabled failure interrupt
status bits, which prevented the eMMC detect logic
to work properly.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the version defines reflect the digits in the version
number. MMC_VERSION_4_41 is defined as 0x441 and MMC_VERSION_4_5
is defined as 0x405. This results in MMC_VERSION_4_5 < MMC_VERSION_4_41
becoming true which was surely not intended. Fix this by
redefining the versions as 0x<major><minor><micro>. This makes the
string generation more complicated but makes versions comparable
again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
having DSR support in mci-core we need a way to
forward the DSR value to the driver. Add it to
platform data for imx-esdhc
TODO: implement the same for other host controller
drivers
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add optional DSR support. This should go into the kernel, too
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The eMMC and the SD-Card specifications describe the optional SET_DSR command.
During measurements at our lab we found that some cards implementing this feature
having really strong driver strengts per default. This can lead to voltage peaks
above the specification of the host on signal edges for data sent from a card to
the host.
Since availability of a given card type may be shorter than the time a certain
hardware will be produced it is useful to have support for this command (Alternative
would be changing termination resistors and adapting the driver strength of the
host to the used card.)
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Year is coded in 4 bits of CID. eMMC 4.41
adds a new interpretation rule: production
year for 4.41 cards and newer is between 2010
and 2025 with 0 corresponding to 2013.
This fix was inspired by currect kernel code.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
eMMC is available up to version 4.5 but the
correct version is not decoded. Change version
definitions to support more minor verions, add
missing versions and parse the minor versions from
ext_csd.
After this, card detection code and devinfo reports
correct versions.
Handling is inspired by u-boot code.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Confirmed working on Tegra 2, may need some small adjustments for
Tegra 3.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>