With upcoming EFI payload support the efi.h file will diverge
from the kernel, so move it from include/linux/ to include/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a devname field to struct console_device so that the device
name can be set by the driver. This makes it possible to have
persistent device names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some devices may have a much more efficient way to output strings
rather than single characters. Let console devices implement a
callback for this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
remove unused function declarations and definitions:
- vallocc is #if 0 in source code
- pvalloc is defined but not used
- cfree is defined but not used
- malloc_usable_size is unused
- mallopt is not defined
- mallinfo is not defined
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Just returns error code instead of 0 or 1.
With this fix, $? is set to child exit code in all cases.
Without this fix, /child $PATH;echo $? displays 1 even if
child script calls exit with a specific non zero error code.
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The menutree doesn't select CONFIG_GLOB, but it depends on it. Without
it will just hang. So let it select it automatically. Also remove the
dependency of CONFIG_GLOB on CONFIG_HUSH, because glob() will run with
the simple shell as well.
Also let CONFIG_MENUTREE select on CONFIG_GLOB_SORT. While is not
strictly needed, many people use menu/00-foo menu/10-bar menu/20-barf
to sort their menu entries. So select it out of convenience.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Crazy things happen if there are resource conflicts and a device probe
runs dev_request_mem_region. The dev_request_mem_region returns a
start pointer which is zero. The probe function doesn't check on this
and probing the device on zero base address.
To debug this in debug log level there are many other outputs. This patch
replace the debug print to a warning printout. A conflict should
normally never happen. If there is a conflict it's much easier to see it
with this patch.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* fix indentation of options in 'help bootm'
* add missing help for -m
* put some output into debug/verbose mode
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The of_* commands take devicetree nodes as parameters. Add a
devicetree completion function to ease passing nodes to these
commands.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the command specific complete callbacks only work when no
option is typed already. For example "devinfo <tab><tab>"
correctly completes the devices, but "devinfo -x <tab><tab>"
does nothing. That is because the options are passed to
the input string of the completion handlers. Skip the option
string by finding the last space in the input string. This
is not perfect since "devinfo -f<tab><tab>" still does not
work, but it's better than what we have now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In case of device parameters setting variables may fail. return
the result of set_local_var so that the user has a chance to detect
the failure with $?.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Shell scripting commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* CMD_MEMORY was defined both in common/Kconfig and commands/Kconfig
* that symbol turned not a command on, but just the compilation of
commands/mem.c, so rename it accordingly
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch corrects exporting unsigned 64-bit environment variables.
I had left out a signed off line before.
Signed-off-by: Michael Burkey <mdburkey at gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The purpose of envfs_register_partition is to print an error
message when the partition does not exist. Print an error message
from generic code instead and drop this function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cast prevents us from doing proper error checking.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This most likely doesn't fix any real bugs, but it's the
right thing to do and reduces the noise level with static
checkers.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Properly detect when an environment file is truncated. This can happen
when a previous saveenv failed because the environment partition is too
small.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The return value check of the write call is completely bogus. We
check if we have written at minimum sizeof(struct envfs_super) bytes
instead of all bytes. Properly check for all bytes written instead
and allow write to write less bytes than requested.
Do not use write_full because this file is compiled for userspace
aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rework the current framework so that I/O mapped I/O resources are
also possible.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
envfs_load_data needs a pointer to the envfs_super, otherwise it
works on an unitialized struct when detecting the envfs version.
This is broken since:
| commit 0a2a8f7059
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Thu Feb 20 08:16:01 2014 +0100
|
| environment: Add function to load envfs from buffer
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Grmpf. Most compilers do not issue a warning, only the blackfin
gcc 4.3.5 warns about this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Creating menus from the shell using the regular 'menu' command is rather
complicated. This adds a 'menutree' command which creates a menu from
a directory structure. In the directory structure each directory corresponds
to a single menu entry. The directory contains the following files:
title - A file containing the title of the entry as shown in the menu
box - If present, the entry is a 'bool' entry. The file contains a variable
name from which the current state of the bool is taken from and saved
to.
action - if present this file contains a shell script which is executed when
when the entry is selected.
If neither 'box' or 'action' are present this entry is considered a submenu
containing more entries.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a bootspec entry has the 'devicetree' property specified, check
if the tree is compatible with the currently running machine, otherwise
ignore the entry. This makes it possible to have entries for multiple
machines on an SD card and pick a suitable one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add DDR3 SPD verification support for use by the PPC 8xxx DDR driver.
This is based on the equivalent files from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this barebox can start root filesystems containing bootloader
spec entries via NFS. It is used as:
boot nfs://<ipaddr>[:<port]//path/to/nfsroot
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The defaultenv-2 has ifup support as a shell script. This patch
replaces it with a command which is more robust, can be called
from C and now can also bring up all configured interfaces.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DFU is for device firmware upgrade, but for development purposes it's
sometmes useful to just start a kernel vie DFU. This adds a boot option
for doing this and also the corresponding counterpart on the host. With
this it's possible to boot a system with:
scripts/dfuboot.sh -k linuximage -d dtb -c "root=ubi0:root ubi.mtd=ubi rootfstype=ubifs ignore_loglevel"
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can compile barebox for multiple boards at once, but currently
they all share a single default environment. This patch adds a
defaultenv_append() which boards can call to customize the default
environment during runtime. Each board now generate default environment
snippets using bbenv-y and add them during runtime with defaultenv_append()
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default environment buffer is an unsigned char array and thus
may be unaligned. Some decompression algorithms expect the buffer
to be sufficiently aligned for u32 accesses. We make this sure by
copying the default env to a temporary buffer. Instead of doing this
just add a __aligned(4) to the default environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of asking explicitly for the default environment compression
type ask for the in-barebox default compression type. This also adds
a DEFAULT_COMPRESSION_SUFFIX make variable which can be used together
with the wildcard rules for compressed files to generate compressed
files without explicitly support each compression type.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Finding out whether to rebuild the environment is a difficult task
since we have to track all files in a directory. Instead of trying
this, just rebuild the environment during every build and only if
it differs to the last one overwrite the target. This way make
only sees a change when the environment is changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CHECK common/kallsyms.c
common/kallsyms.c:170:12: warning: symbol 'kallsyms_lookup' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We check whether the file passed as devicetree actually is a devicetree,
but we missed to return an error if it's not. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Similar to mount(8) the barebox command mount now supports passing a string
to the file system driver via -o.
This is used in the next commit to let the user specify port numbers for
nfs mounts.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
free() already checks the pointer to be non
NULL. No need to do it again.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to load all the lowlevel init code, including the
uncompressor, inside SRAM and not just the bare init part. This is
useful when pbl is used as a first-stage bootloader but is loaded by an
external firmware.
Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
default_environment_path only exists when CONFIG_ENV_HANDLING is enabled.
Boards would have to #ifdef this if they wanted to use
default_environment_path. Use accessor functions instead which can
be ifdeffed on a single place.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux specifies the linux,stdout-path property in the /chosen node
in the devicetree. Unfortunately this is ignored in most cases.
For cases in which barebox uses this property for its own use we
translate this into a Linux boot arg with:
- the console name provided by the serial driver
- the the instance from the 'serial' alias
- the baudrate from the actual baudrate.
So with this it's for devicetee enabled boards no longer necessary
to manually assign a console= parameter. Should a user not want
to use the automatically assigned parameter it should do:
global.linux.bootargs.console=
in the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The common bootm code used to load uImage contents to SDRAM
before calling into the handlers if possible. This makes the
handlers complicated since they have to handle many cases. Instead,
introduce a helper to load the os after the handlers have figured
out a good load address.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes execution of a function has to be delayed, for example
when a backlight can only be turned on when the picture has stabilized.
To help in such situations add a convenience function around the poller
stuff to call a function after a delay.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds the crc32 command to be build
as host and optionally as target tool.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CONFIG_MAXARGS is only used with the simple console support, so add
a 'depends on'. While at it, move it below the shell selection.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The build of target tools fails on sandbox architecture.
We don't need any target tools in this case, so add a dependency.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the name '__promptme' does not make clear what the variable means. rename
it to 'interrupt' which is set to true when the user has hit ctrl-c.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
input.__promptme is no valid indicator that run_shell should be left.
It should be left on executing the 'exit' builtin which is indicated
by a return code < 0 from parse_stream_outer(). Track this with an extra
variable and use it as a condition to return from an interactive shell.
This fixes the weird behaviour that hush exits (and the user finds itself
in the menu) when a syntax error occured.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DOS MBRs might contain an extended partition that holds several logical
partitions. Add these to the partitions of the block device.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code used to ineffectively take the end of the last partition as guess
for the disk size. Better use the end of the partition that has its end
rearmost.
Also return an unsigned type instead of int as the result is always
non-negative.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fix a compiler warning while building sandbox barebox with
gcc version 4.8.2.
common/dlmalloc.c: In function ‘barebox_calloc’:
common/dlmalloc.c:1756:2: warning: ISO C90 forbids mixed declarations
and code [-Wdeclaration-after-statement]
void *mem = malloc(sz);
^
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If drivers want to fixup their specific instance they need some context
to know which instance they have to fixup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the cdev for a given directory can be determined by get_cdev_by_mountpath().
Use this function and remove the cdev argument from blspec_scan_directory().
Also, export the function to make code possible which boots the bootloader
spec entries found in directories.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of only allowing complete devices we now also allow single
partitions to look for bootloader spec entries.
Normally the bootloader spec defines a way to find a partition containing /boot
on a device. On embedded systems it's often useful instead to have only a
single partition image which contains both the kernel and the root filesystems.
This partition image may be written to the device multiple times. With this
patch they can be booted with 'boot emmc0.<partno>'
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default/once files contain the full path to the entries, not
only the filename. This fixes booting the once and default entries.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the case where CONFIG_PASSWORD is off, CONFIG_PASSWORD_DEFAULT is
undefined. As undefined is not "", this causes make to call find -type f.
If there is a filename containing a :, make will complain about having
"multiple target patterns"
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a tool for installing kernels according to the bootloader
spec. systemd already has a similar tool, but it is limited to installing
kernels on the currently running system. The barebox kernel-install
tool instead can also be used to install kernels on removable media on a
development host for cross development. It is compiled in two variants,
as 'kernel-install' for the host and as 'kernel-install-target' using
$CROSS_COMPILE.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Bootloader Specification describes a way how kernels can
be installed on devices and how they can be started by the bootloader.
The bootloader spec is currently supported by (x86) gummiboot and
by systemd which provides a kernel-install script. With the bootloader
spec it's possible for the Operating system to install a new kernel
without knowing about the bootloader and for the bootloader it's possible
to discover and start Operating Systems on a media without being
configured.
For more details about the spec see:
http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
This patch adds barebox support for the spec. It enhances the 'boot'
command so that not only boot script names can be given, but also
devices containing bootloader spec entries. With this it's possible
to call the 'boot' command like: 'boot sd emmc net'. It would then
first look for bootloader spec entries on the (removable) sd card,
then, is nothing is found, on the internal emmc and if still
unsuccessful would call the 'net' bootscript.
The bootloader Spec currently doesn't specify which entry should be
default if multiple entries are found on a single device. Therefore
barebox currently has two extensions of the spec. The $BOOT diretory
can contain a file named 'default'. If present, the content of the
file is treated as a filename under $BOOT/loader/entries/ which is
used as default. Similarly if a file named 'once' is present, the
entry is started once and the file is removed afterwards. This is
useful for testing if a newly installed kernel works before making
it the default.
As on ARM and other Architectures a devicetree has to be specified
for the kernel, the 'devicetree' property is used to specify a
devicetree. Like 'kernel' and 'initrd' this also contains a pth
relative to $BOOT.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces some new environment variable helpers and updates
the existing ones. Newly introduced are:
getenv_bool: read a bool variable
getenv_ul: read an unsigned long variable
getenev_uint: read an unsigned int variable
getenv_nonempty: like normal getenv, but does return NULL instead of an
empty string
All new helpers take a pointer to the value. This value is only modified
when the variable exists. This allows the following programming scheme:
unsigned int myvalue = sanedefault;
getenv_uint("myvalue", &myvalue);
So without checking the return value myvalue contains the best possible
value.
getenv_ull is updated to this scheme.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This replaces the 'boot' script in the defaultenv-2 with a command
with the same behaviour. A command gives more flexibility for future
externsions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this the verbosity of barebox can be controlled during runtime
using the 'loglevel' globalvar.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When globalvar_add_simple was called on previously existing variables
then the value was overwritten, even when value was passed as NULL.
Do not overwrite the value in this case which allows us to do a 'global'
on the same variable multiple times without loosing the values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so generic code can check if the console is enabled
and now we can use loadb & loadxy
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can get console by it's device
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so if we need to do something switch in the board we can fill this function
pointer (as example on Animeo IP shutdown some rs232 & rs485)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In theory we can overwrite a builtin command with a script. However,
I don't know a single case where this has been done. Scripts are
often more unflexible than commands so it's unlikely that a script
can extend the functionality of a builtin command. Moreover, the
internal command is no longer accessible once it's overwritten by
a script.
Invert this logic so that a builtin command can overwrite an existing
script. This will help when the 'boot' script is converted to a
builting command. Then with old environments the builtin command will
be used instead of the script.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to use struct image_data as the central data structure for bootm and
also as the input data structure. This makes it unclear which of the fields
are actually input data. This patch creates a struct bootm_data which is
exclusively used for input data to make usage clearer.
Also it moves the dispatching of multifile uImage pathnames to the core bootm
code so that the core code gets more flexible and the command code simpler.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as the console is always enable
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device
save 32 bytes on versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
even if the env is broken you will have a password
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we guarantee that barebox is secured again user interaction
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Convert to static inline functions and use lower case letters for function
names. Also, include mach/debug_ll.h when an architecture provides support
for debug_ll, not only when it's actually enabled. This allows architecures
to put some UART initialization code into mach/debug_ll.h which is compiled
out when debug_ll is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If CONFIG_PARAMETER is not set, dev_set_param() does not call the setter
function. Call it directly instead in this case.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The boards often have a sane default for the hostname. Provide a C
function for setting/getting it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of calling of_get_model() in barebox_get_model() add a
barebox_set_model() and use it to set the boardinfo once it's
available from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this all code uses barebox_get_model() and no longer
a compile time generated string.
Also this renames barebox_boardinfo() to barebox_get_model()
since we are going to add the corresponding _set_ function
and 'model' corresponds to the devicetree notion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So far we only had the version command which is able to print
the barebox version. To make the barebox version available for
scripts add a globalvar for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Calling globalvar_add_simple() and setting a value is more than common.
Add a parameter for the initial value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drop ifdef CONFIG_UIMAGE_MULTI as the Kconfig option is not present anyway
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The CONFIG_PANIC_HANG a part of the U-Boot heritage.
It is used in the barebox code, but there is no mention
of this option in Kconfig files.
Sometimes this option is very helpful, so
let's resurrect it.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_print_cmdline() is passed a devicetree, so use this one instead
of the internal devicetree. This fixes the cmdline printout when
bootm on ARM is used with an external devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to force a width of the pointer, so use void *. Also it's
not modified in memory_display, so also add a const.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for extracting LZ4-compressed kernel images,
as well as LZ4-compressed ramdisk images in the kernel boot process.
This depends on the patch below
decompressor: Add LZ4 decompressor module
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
doing a 'cs0.active=' on the command line crashed barebox. Fix this by
not dereferencing val when it's NULL.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code calculates the DDR2 SPD checksum as per JEDEC standard
No 21-C Appendix X (revision 1.2)
The code is based on the equivalent files from U-Boot version
git-a71d45d.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Being able to trace initcall is very useful when trying to
find out where startup hangs. This adds a kconfig option for
it to make it easier to access.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When using devicetrees the boardinfo (or model) can be obtained
from the devicetree. Add a function to get the boardinfo so that
we have a chance to add information from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ENABLE_DEVICE_NOISE is used only in two network drivers and is
otherwise unused. ENABLE_FLASH_NOISE is completely unused.
ENABLE_PARTITION_NOISE enables DEBUG in the partition command,
but this code has no debug messages at all.
Remove all this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>