Sascha Hauer
74874be56a
[AT91sam]: Add definitions for at91sam9263
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-08-01 11:59:44 +02:00
Sascha Hauer
c10e20846d
at91sam ether: Make more configurable via platform_data
...
Pass RMII and phy address via platform data rather than hardcoded.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-08-01 11:33:12 +02:00
Sascha Hauer
b28943274b
[ppc] include string.h in include/asm-ppc/elf.h, needed for memset
2008-07-03 10:32:08 +02:00
Sascha Hauer
a91979a87d
oops
2008-06-06 09:37:44 +02:00
Sascha Hauer
ee6d36a540
- introduce ioctl call
...
- pass open/close/lseek through to drivers
2008-06-06 09:30:48 +02:00
Sascha Hauer
3d45abb7c4
[NAND] continue to make it work. Now works partly on at91sam9260
2008-06-06 09:30:39 +02:00
Sascha Hauer
f3351ebd78
add basic at91sam9260 support. Currently only second stage
...
bootloader is supported:
- No SDRAM initialisation
- No UART init / baudrate change
2008-06-06 09:30:32 +02:00
Nishanth Menon
03f9461862
014-OMAP-add-mux-header
...
[Patch 14/17] U-Boot-V2:ARM:OMAP3: Add mux Header
This patch adds the OMAP3 mux header.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
2008-06-05 19:45:43 +02:00
Nishanth Menon
9cca7cf662
013-OMAP-add-silicon-headers
...
[Patch 13/17] U-Boot-V2:ARM:OMAP3: Add generic Headers
This patch adds the generic OMAP headers and OMAP specific headers.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
2008-06-05 19:45:42 +02:00
Nishanth Menon
c6ed31bbc4
012-OMAP-add-silicon-part2
...
[Patch 12/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP3 Silicon files
This patch introduces support for OMAP3430 clocking infrastructure. Please note that SRAM based configuration requires GPMC values to be updated before returning to caller- TBD.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
2008-06-05 19:45:42 +02:00
Nishanth Menon
cd008fb265
009-add-NS16550
...
[Patch 09/17] U-Boot-V2:Serial: Add support for NS16550 Driver.
This introduces support for NS16550 and related OMAP support. This driver is a port from Uboot v1 driver from OMAP's Uboot tree.
OMAP U-Boot V1 source is available here: http://linux.omap.com/pub/bootloader/3430sdp/u-boot-v1.tar.gz
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
2008-06-05 19:45:21 +02:00
Sascha Hauer
596c845072
[memory layout]: streamline memory layout
...
Memory layout can now be specified via kconfig options. Two
possibilities exist: default layout means the layout is stack
/ malloc heap / U-Boot. The user can also specify fixed addresses
for each TEXT_BASE / stack / malloc heap.
2008-06-04 11:54:03 +02:00
Sascha Hauer
beaab972f8
hardcode _FILE_OFFSET_BITS to 32
2008-06-03 13:34:45 +02:00
Sascha Hauer
9d0662bc0a
net.h: no need to put extern declarations in ifdefs
2008-06-03 13:33:22 +02:00
Sascha Hauer
aa2111e257
fix warnings in malloc code introduced by last commits
2008-06-03 13:30:38 +02:00
Sascha Hauer
dabec3a7a1
Merge branch 'master' of git://www.denx.de/git/u-boot-v2
2008-06-02 16:13:14 +02:00
Menon, Nishanth
22d3dc0d27
[arm] remove unsused sections while linking
2008-05-12 15:52:23 +02:00
Sascha Hauer
c3ec6a862c
[cramfs] fix compiler warning about undefined __LITTLE_ENDIAN
2008-04-07 12:19:36 +02:00
Sascha Hauer
9c7d282579
[general] Move include/configs/* to board/*/config.h
2008-04-07 12:18:05 +02:00
Sascha Hauer
5b671e9611
remove unused mx1ads.h
2008-04-07 11:24:26 +02:00
Sascha Hauer
f27462d6df
remove currently unused lcd.h
2008-04-07 11:23:32 +02:00
Sascha Hauer
ae6cc2d36b
[m68k] Add Freescale Coldfire V4E Architecture support
...
- Added m68k vector, exception & interrupt handlers
- Added m68k macros to access m68k movec registers
- Added Coldfire support code (MultiChannelDMA)
- Added board support for phytec phyCore-MCF baseboard
- Added board support for konzeptpark MCB2 prototype
Signed-off-by: Carsten Schlote <schlote@vahanus.net>
2008-04-04 18:16:06 +02:00
Sascha Hauer
50cc8c5412
Subject: [PATCH] [general] Fixed constant strings in data section issue
...
For practical reasons I changed all string literals assumed to be constant
to reside in .rodata subsection at end of .text section.
Signed-off-by: Carsten Schlote <schlote@vahanus.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-04-04 14:45:04 +02:00
Sascha Hauer
a9912f68c6
Fixed orphaned CONFIG_INTERRUPTS
...
replace remaining CONFIG_INTERRUPTS with CONFIG_USE_IRQ
Signed-off-by: Carsten Schlote <schlote@vahanus.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-04-04 14:45:04 +02:00
Sascha Hauer
839aaaf9ef
add protection from double inclusion in string.h
2008-03-31 21:55:34 +02:00
Sascha Hauer
c2d756b84b
add CSPI1 GPIO defines
2008-03-14 13:05:29 +01:00
Sascha Hauer
a14a5c02f0
first (partly) running spi support
2008-03-14 12:59:55 +01:00
Sascha Hauer
906eea397a
beginning of SPI support
2008-03-11 22:13:06 +01:00
Sascha Hauer
1871125c56
add several SDRAM Controller and PLL related register defintions
...
to imx27-regs.h
2008-03-11 21:59:26 +01:00
Sascha Hauer
ce172e152e
add ls -c and -l
2008-03-11 21:41:56 +01:00
Sascha Hauer
f5a9246875
use newly introduced stringlist functions for tab completion
2008-03-11 21:40:40 +01:00
Sascha Hauer
8f35e16333
add stringlist function. They can be used to build a list
...
of strings. For now mainly useful to print the resulting
list in columns which is used in tab completion and ls.
2008-03-11 21:38:22 +01:00
Sascha Hauer
8759e68de2
Add the possibility to have an architecture specific ctrlc() function.
...
This allows us to return immediately in ctrlc() on sandbox and thus
not slow down network througput.
2008-03-11 00:00:37 +01:00
Sascha Hauer
187847b2b4
add globbing support
2008-03-09 22:35:38 +01:00
Sascha Hauer
1a8e0f589f
add armlinux.h
2008-03-01 22:47:46 +01:00
Sascha Hauer
c0770312bc
remove traces of old tab completion
2008-03-01 22:47:06 +01:00
Sascha Hauer
df31bb46be
implement TAB completion
2008-03-01 21:08:14 +01:00
Sascha Hauer
a1a747af7f
fix typo
2008-03-01 21:06:14 +01:00
Sascha Hauer
8d8f900366
[ARM] Remove CONFIG_ARCH_NUMBER from Kconfig system. Putting too many
...
values into kconfig which are not user configurable at all only
encourages people to put even more stuff in there. This is not
good because people tend to have board patches lying around and
these patches won't apply regularly if they all change the same
file (arch/arm/Kconfig)
Instead, introduce a function armlinux_set_architecture() which
everyone can call during board setup.
Similarly introduce armlinux_set_bootparams() for the boot
parameter pointer.
2008-02-26 15:38:37 +01:00
Sascha Hauer
066ac7abdb
[CFI driver] add missing flash protection for new driver
2008-02-26 11:55:41 +01:00
Sascha Hauer
3d3c13d8f8
[CFI Driver] - Update Kconfig help texts
...
- Turn switch/case into if/else to be able to optimize out
unused code when not all bankwidths are needed
2008-02-26 11:28:55 +01:00
Sascha Hauer
51c840cd18
[CFI driver] For some Spansion flashes we have to write the
...
AMD_CMD_WRITE_TO_BUFFER command to the destination
address of the buffer write and not to the sector
beginning. Linux mtd does this as default, so I
assume this should work for other flashes aswell.
Reorder functions so that this change fits in nicely.
2008-02-26 10:32:25 +01:00
Sascha Hauer
7f88a7844c
[CFI FLASH] Make the 'new' driver compile again and reorder functions to
...
get rid of static function declarations.
2008-02-25 18:41:25 +01:00
Sascha Hauer
fa052abb64
add missing include
2008-02-20 19:07:47 +01:00
Sascha Hauer
9beb36884b
[ARM] Remove ARCH_NUMBERs from config.h and put them into Kconfig
2008-02-20 19:03:24 +01:00
Sascha Hauer
f95ec8a32d
- Add functions to register image handlers for booting uImages
2008-02-20 19:01:54 +01:00
Sascha Hauer
8d4e06d3d5
[mpc5200 fec] revert to some old version (somehow my play version got into the
...
repository). Runtime tested on pcm030
2008-02-20 17:48:31 +01:00
Sascha Hauer
7b4e9c4a82
[i.MX]: Basic board support for the Freescale i.MX27 eval board
2008-02-19 15:59:37 +01:00
Sascha Hauer
d5caf5ec5b
[i.MX27]: Add CSx base addresses
2008-02-19 15:53:18 +01:00
Sascha Hauer
c47beef096
[i.MX]: Add imx_get_ipgclk() prototype
2008-02-19 15:52:15 +01:00