We already have the possibility to register a mci with a certain
filename to get persistent names. However, the device needed to
find the probe parameter still has the name 'mcix'. This patch
changes this by registering the mci device with the same name
as the filename.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the info is device specific and not driver specific, attach
the callback to the device. This makes it possible to have a info
callback for a device which does not have a driver attached.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some MMC cards support boot partitions. These are special regions
on the MMC card intended to put a bootloader on.
This patch adds support for these partitions, they are accessible
as /dev/diskx.boot[0|1].
Additionally the partitions can be configured bootable using a
device parameter. This can be used to mark the user area or one
of the boot partitions as bootable.
Since this feature is mostly seen on eMMC cards it is made optional
to lower the size impact for boards which do not have eMMC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the i.MX esdhc divider settings to FSLs U-Boot.
Current timings work fine for SD cards, but not for eMMC.
Although the calculation is fine according to the datasheet and reading from
eMMC works, writing is broken. Atleast on i.MX53/tqma53.
With this patch the result is the same, but uses different divider values to
achieve it.
While at it, replace the udelay with a busy-loop.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This gives the SDHCI specific registers a common name and moves
them to a separate file for use by other SDHCI like drivers.
The SDHCI spec has some 16bit and 8bit registers. The i.MX accesses
these as 32bit registers. These register defines now are named after
the SDHCI registers they combine into one, for example:
SDHCI_HOST_CONTROL__POWER_CONTROL__BLOCK_GAP_CONTROL
is the 32bit version of the SDHCI registers HOST_CONTROL, POWER_CONTROL
and BLOCK_GAP_CONTROL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the MXS MCI driver with an eight bit capable eMMC results into the
'devinfo' message the interface uses '0' bits for data transfer:
barebox:/ devinfo mxs_mci0
resources:
num : 0
start : 0x80034000
size : 0x00002000
driver: mxs_mci
bus: platform
Interface
Min. bus clock: 1476 Hz
Max. bus clock: 48000000 Hz
Current bus clock: 24000000 Hz
Bus width: 0 bit
The eight bit interface width is stored internally as value '2'. And a two bit
'2' ends up into 0xfffffffe when used as an array index. Using an unsigned
field instead fixes this issue:
barebox:/ devinfo mxs_mci0
resources:
num : 0
start : 0x80034000
size : 0x00002000
driver: mxs_mci
bus: platform
Interface
Min. bus clock: 1476 Hz
Max. bus clock: 48000000 Hz
Current bus clock: 24000000 Hz
Bus width: 8 bit
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
EIO is a better error message to describe the data transfer to or from the SD cards has failed.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The host limits are only one limit we must honor when changing the transmission frequency.
The SD cards have their own limits, so take them also into account.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
According to the SD card spec the detection can happen at 400 kHz
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since a generic block reset function is a available, also the MCI driver
should make use of it.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MMC_BUS_WIDTH_* macros do not correspond with the real bus width.
After setting a bus width larger than 1 bit the next call to change the
frequency ends in the default handler and the host interface stays silently
at the previous frequency.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove some leftover from former powerpc support which has no
relevance for i.MX based esdhc controllers.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides rename MFD-related symbols for using MFD-prefix.
Additionally, sorting mfd/Kconfig and mfd/Makefile records.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch moves the register defines and bit definitions
into one include file. As the defines are common for ssp
and mci devices they can be shared.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently there is no common way for the mci host driver to tell
that thee car is write protected. This adds a card_write_protected callback
which is used by the framework to tell whether it's protected or not.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as it's handle by detecting the IP version and bus with
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as we need to reset the IP
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Alexander Shiyan
wilhelm
Juergen Beisert
Hubert Feurstein
Michael Grzeschik
Jean-Christophe PLAGNIOL-VILLARD