We do not have usb_driver_unregister function, so remove this declaration.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The problem was introduced in
commit 51885a7d73
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu Jun 28 09:56:23 2012 +0200
Change byte order detection mechanism to kernel style
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds USB gadget support to the i.MX chipidea driver. Basically
we have to add a register function to the fsl udc driver and call
this from the chipidea driver if device mode is selected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some controllers need an init hook after the USB controller is
started, so implement the post init hook for i.MX.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make the register defines for ULPI more complete. Also, Add a proper
ULPI_* Namespace to the existing defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For proper USB function the usbmisc registers have to be initialized.
This patch adds a driver which matches for the usbmisc registers. This
driver is called from a new driver which binds to the USB ports to
configure the misc registers. After that the driver registers the EHCI
driver and an ULPI transceiver if necessary. Currently only host mode
is supported, but device support can be added later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The EHCI core often is part of a otg core. Allow it to be registered
separately from another driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Linux Kernel defines only one of __LITTLE_ENDIAN and
__BIG_ENDIAN. Endianess can then be tested with #ifdef __xx_ENDIAN. Userspace
always defined both __LITTLE_ENDIAN and __BIG_ENDIAN and byteorder can then
be tested with #if __BYTE_ORDER == __xx_ENDIAN.
As we tend to use a lot of Kernel code in barebox we switch to use the kernel
way of determing the byte order.
As this always causes a lot of confusion add a check to include/common.h to
make sure only one of __LITTLE_ENDIAN and __BIG_ENDIAN is defined.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we do not have ISP1504-related functions, we migrated to ULPI.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added ULPI detection function.
Same function from isp1504 driver removed.
Used implementation from Linux kernel.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These registers can be used for any standart ULPI chip,
not only for ISP1504.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes the USB command optional and makes usb_rescan a
global function. This way we can use USB in noninteractive
environments.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix usage of __LITTLE_ENDIAN macro.
Both __LITTLE_ENDIAN and __BIG_ENDIAN are always defined by
include/linux/byteorder/generic.h, checking for their existence is
pointless.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this rework is done in order to add a phylib and allow to have phy driver support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We accidently have two list implementations in the tree:
include/list.h and include/linux/list.h. This patch moves
the latter (newer one) to include/linux/list.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for USB devices. It uses
the Linux Kernel gadget API. Along with this patch
comes driver support for the Freescale (arc) USB OTG
Core and USB Device Firmware Update (DFU)
The serial gadget support is not working at the moment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Alexander Shiyan
Antony Pavlov
Jean-Christophe PLAGNIOL-VILLARD
Eric Bénard
Rosen Kolev
Krzysztof Halasa
Michael Grzeschik
Juergen Beisert