For now only the v1.2 i.MX28 silicon is supported. The actual information is
read from a magic address within the internal SRAM.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX53 has the bootsource instance information stored
in SBMR[21:22], expose it to the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a C interface to set and get the bootsource instance:
int bootsource_get_instance(void);
void bootsource_set_instance(int instance);
Also export the shell variable "bootsource_instance".
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This way the bootsource is exported to the environment, even if unknown.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch seperates the imx independent from the arch independent code. The
following functions and enums are renamed:
- imx_bootsource() -> bootsource_get()
- imx_set_bootsource() -> bootsource_set()
- enum imx_bootsource -> enum bootsource
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cfa-10036 comes in two flavours, with either 128MB or 256MB of RAM
on it.
Since it's not stored anywhere, we need to runtime detect it by
introducing the cfa10036_get_ram_size function.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There was a erase block sized (here 131072) char buf array on the stack.
Changed this to get the space from malloc preventing stack overflows.
Also fix a wrong return without clean up.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rename the barebox_loc environment variable to bootsource, since
- barebox_loc is a mixture between abbriviation and fulltext which is not nice
- technically it describes the source the SoC has booted from. This is not
necessarily barebox but could also be some other first stage loader.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The second UART is used on the mba53 baseboard. The first UART is only
used on custom hardware. This patch changes the UART to the one used
on the freely available baseboard.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Make loading environment from MMC generic for all OMAP.
Tested on AM335x, OMAP4.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Tested-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootsource functions are not specific to the first stage
bootloader. They may also be used for detecting the
bootsource to decide where to load the environment from.
Also clean up includes in board files.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit 5f03074 changed storing struct resource end insted of size.
Fix calculation of end in fb
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 51f2ded17c ("param: make return
value of param getter function const") made the parameter getter const,
but neglected to change the dev_add_param() function prototype in the
!CONFIG_PARAMETER case.
Fixes the following warning with CONFIG_NAND and !CONFIG_PARAMETER:
drivers/mtd/nand/nand_base.c: In function 'add_mtd_nand_device':
drivers/mtd/nand/nand_base.c:1720:2: warning: passing argument 4 of 'dev_add_param' from incompatible pointer type [enabled by default]
include/param.h:59:19: note: expected 'char * (*)(struct device_d *, struct param_d *)' but argument is of type 'const char * (*)(struct device_d *, struct param_d *)'
Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On some i.MX SoCs the SDRAM controller has chipselect 2 enabled
by reset default. This confuses our SDRAM size detection. We
already have a fix for this in place. This patch adds the fix
for i.MX35 which needs it aswell. Also since we now detect the
SDRAM size in the SoC specific entry functions we have to apply
the fixup there, too.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch creates a seperate function for mx25 and mx35 to save it's
bootsource.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch renames imx_27_boot_save_loc() to imx27_boot_save_loc(), so that all
imx*_boot_save_loc() functions follow the same nameing sheme.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes some code leftover from:
a029e32 ARM i.MX: rework bootsource setting
which is now a no-op.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function gives all functions a common, i.e. void, return value.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Enums are in the same way as defines, so write them in uppercase.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The number of "#if" has been reduced to have less obfuscation, now have the
three keys or have none of them
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a key is pressed but not released before booting and the key is
connected to an active low gpio it's not detected. This patch solves
that.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The pcm051 has no MMC WP pin. This pin is used for a gpio and
needs to be muxed different. Created a custom mux file for
this case.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The muxing in the am33xx_mux.c file is not generic as the muxing
setup does not fit for every board. Move the structs and functions
to the mach/am33xx-mux.h so board dependend mux setups can be
created.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>