file_to_sdram is used to load an initrd. The resource size is
then used to pass the initrd size to Linux. This means that
the resource size must exactly match the initrd size. Currently
this is not the case since we request the sdram region in chunks
of 8 Kbytes. Fix this by adjusting the resource size when the file
is loaded.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On a systax error we have to bail out of the shell instead of
setting inp->p to NULL and crash barebox with a NULL pointer
deref. This only happened in scripts.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes the problem I had (i.e. a boot loop caused by a stray fi in
/env/bin/init).
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The following patch serie improve the complete support
by adding a complete framework to aalow commands complete support.
The add also car complete support for eval and setting and executable
file support
This also include an update of the stringlist API to support asprintf
API
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=rYfw
-----END PGP SIGNATURE-----
Merge tag 'complete_update_support' of git://git.jcrosoft.org/barebox into next
improve complete support
The following patch serie improve the complete support
by adding a complete framework to allow commands complete support.
The add also car complete support for eval and setting and executable
file support
This also include an update of the stringlist API to support asprintf
API
This allows to call 'sh' in scripts without arguments in which
case an interactive shell will be started.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hush has a long standing and anoying glob bug. hush expands wildcards
during parsing of the script or command stream. When the command stream
begins to execute the wildcards are already expanded which leads to:
mkdir /tmp
cd /tmp
mkdir foo; ls *
ls: *: No such file or directory
To fix this expand wildcards right before executing the command. Since
'for' loops are not executed in commands, we have to keep the old behaviour
in here so that 'for i in *' still works.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By doing so glob will not return GLOB_NOMATCH anymore but instead
just does what fake_glob would do.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hush used to escape '*' '[' '?' during parsing because the quotes
got removed in the first parsing loop.
globhack is used to remove these escapes again for glob. Since we now
keep the quotes until the end of parsing and we no longer escape glob
wildcards, we do no longer have to remove any quotes. With this globhack
can be much simpler.
While at it, change the prototype to match the one from glob() and rename
the function to fake_glob, because that's what it is: it just copies the
input string into the output struct without actually globbing.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hush removes the quotes from strings too early. This leads to some bugs.
When hush executes
echo "hello sascha"
it correctly results in:
argv[0] = "echo"
argv[1] = "hello sascha"
However, the following behaves incorrect:
a="hello sascha"
echo "$a"
results in:
argv[0] = "echo"
argv[1] = "hello"
argv[2] = "sascha"
This is because hush removes the quotes and inserts variable values in a
single loop, so
echo "$a"
becomes:
echo hello sascha
after the loop.
Instead, keep the quotes until all variables are inserted and remove them
at the end.
This also fixes that echo \" resulted in \" instead of ".
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
General coding style cleanup
- add some blank lines
- add whitespaces on on both sides of operators
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to execute any file and detect it's type to handle it.
This will allow to use shell for bootp bootfile or dfu.
You can register multiple hook for the same filetype. They will be execute
in the invert order of register. If a hook does not handle the file you just
return -ERESTARTNOHAND;
This is only available with hush parser.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This is a brown paper bag type of bugs. Do not assume that a file
has to be at minimun 512 bytes to be detectable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So we can use the menu for the xloader too.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds the scripts/mkcompile_h from the Kernel. This gives
us additional information about the build like who built this binary
and with which compiler. Currently the only information used is the
build timestamp and the generation number.
This also fixes the build timestamp in the banner which is now correct
even with consecutive builds without making clean in between.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There can be only one console for console_simple, so
return with -EBUSY when the second gets registered.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bareboxenv script build for the target does not work on
all architectures, so make it optional.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
You can now use AINSI color in the display of the menu or menu_entry.
As the length of the string is not any more the same as the display simplify
the invertion display managemnent.
We just now invert the fontground and backgound on the string itself as done
in Kconfig.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The behaviour of other shells suggest that with source or '.'
the path should be resolved using the PATH environment variable. Do
the same in barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This shrinks the resulting binary size by ~25%. Exceptions
are still handled in arm mode, so we have to explicitely
put .arm directives into the exception code. Thumb-2 mode
has been tested on i.MX51 Babbage board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
abbreviated commands are derived from U-Boot and are only
partly useful. Noone expects from a shell to support this,
also we have tab completion. They also have some funny
side effects. For example we have a 'time' command. If this
command is not compiled in, the time command is interpreted
as an abbreviated version of the 'timeout' command. So remove
support for abbreviated commands and safe the binary space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
execute_command is the single point where commands are executed and thus a new
getopt context is needed. currently we call getopt_reset here to reset the
context. This breaks though when a command tries to run a command itself by
calling execute_command or run_command. In this case we have to store the
context and restore it afterwards. The same is necessary in builtin_getopt.
Currently noone does this so this one shouldn't fix a bug, but merely allows
us to do such things later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A fixed partition means that we can't remove it. This is only suitable
for our vital /dev/self0 and /dev/env0 partitions, so remove the fixed
flag.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current caching layer only has a single buffer for
writing and reading. The FAT driver often accesses the
fat and then data again, which currently can't be cached.
Reimplement this with a list of cached chunks. The number
of chunks and their sizes are currently hardcoded, but
that could be easily made configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The environment isn't loaded until this command is
is selected - even if compiled in.
This patch makes the dependency explicit.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that we don't need malloc for the console anymore it's
safe to call printf anytime, so switch the initcall debugging
to regular debug() statements..
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we just hang when an initcall fails. This resulted
in most initcalls just returning 0 unconditionally. Instead
of hanging which usually leaves the user without a clue what
happened just continue and hope for the best.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This changes the dynamically allocated kfifos to statically initialized
ones. This makes the console work without malloc and thus safe to be
called before malloc is initialized.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allow to check we do not exceed the size of the SRAM as example
introduce BAREBOX_MAX_BARE_INIT_SIZE the maximum size of bare_init
this will allow your bare_init will fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
needed to use menu framework
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to always call poller_call even durring timeout
and still the case in getc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
enable it only if a compression is enabled
support gzip, bzip2 and lzo
you will be able to choose which compression to use
-rw-r--r-- 1 root root 8436 Dec 15 01:35 barebox_default_env
-rw-r--r-- 1 root root 2782 Dec 15 01:35 barebox_default_env.bz2
-rw-r--r-- 1 root root 2691 Dec 15 01:38 barebox_default_env.gz
-rw-r--r-- 1 root root 3262 Dec 15 01:38 barebox_default_env.lzo
with using gzip and the default env we can save 5.6KiB (5,745 bytes)
with using bzip2 and the default env we can save 5.5KiB (5,654 bytes)
with using lzo and the default env we can save 5.1KiB (5,174 bytes)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
TLSF: Two Level Segregated Fit memory allocator implementation.
Written by Matthew Conte (matt@baisoku.org).
Public Domain, no restrictions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Provide a new API for accessing uImages which makes it easy
for commands to open images, verify them, load to (free) sdram
regions and show information about uImages.
- We now do not load the image to malloced space anymore.
- The data in the header is now stored in cpu native endianess
after uimage_open which makes it easy to access the header data.
- uImage can be loaded to dynamically allocated sdram regions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we have of_get_fixed_tree() which assumes that
there is a global variable holding a oftree. This seems
not very flexible, so for now introduce a of_fix_tree()
which takes an fdt_header as argument and walks the
list of registered of fixup functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DOS partitions are the only partitions we handle at the moment
and without it most MMC/SD enabled configs are useless, so make
it default yes. Also, use 'depends on' instead of 'if'
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
We do not have any command line parser support for bootm anymore.
Disable it for now to at least be able to compile it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since fprintf and console_puts now return the number of
character written the prototypes have changes. We forgot
to fix console_simple which now fails to compile with:
common/console_simple.c:48:6: error: conflicting types for 'fprintf'
include/stdio.h:57:5: note: previous declaration of 'fprintf' was here
common/console_simple.c:67:6: error: conflicting types for 'console_puts'
include/stdio.h:20:5: note: previous declaration of 'console_puts' was here
Fix this by returning the proper numbers of characters written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some console are transient, like the USB connected serial
console which should be removed when the USB connection is
severed.
Enable console removal for such devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Several filetypes can be autodetected. Barebox could make use
of this in several ways:
- Add a command to detect filetypes
- detect arm zImages and uImages to unify the different boot commands
- maybe detect UBI or JFFS2 images to construct parts of the kernel
command line
- select correct uncompression function based on filetype
This patch adds basic support to detect filetypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The rests of U-Boots iminfo command are sitting in commands/bootm.c and
are in a nonusable state. Factor it out to its own file and make it work
again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This covers disk like media like SD card, CF cards, regular hard disks and also
USB mass storage devices. Most common used partition table is still of DOS type.
This implementation is prepared to support more partition types in the future.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The puts functions now properly return the number of characters
written. With this we can also fix fprintf.
Also, remove never reached return in fputs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Thanks to a common memory handling barebox knows the sdram banks
and sizes, so we can add a common fixup functions for the nodes
in the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds basic device tree command support. So far we can
parse a flat device tree (-p), which also stores the tree
in memory, dump it (-d) and free (-f) the internally stored tree.
The chosen node can be updated with barebox bootargs, no other
device tree manipulation is implemented yet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
rename it to digest_file_window
introduce digest_file to digest a file and digest_file_by_name
where we specify the algo by name
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as in barebox the data could be the mapped file or a allocated memory with
just the data (non header)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On arm we have the concept of memory banks which can
be registered and iterated over. This is useful for
other architectures aswell, so add some generic infrastructure
for this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add Kconfig option LOCALVERSION so you can set a customizable suffix
to the barebox version string.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a timeout is specified and expired the command will be executed
by default boot
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
add missing EXPORT_SYMBOL for nan static function
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add missing EXPORT_SYMBOL for nan static function
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes loadb and loady commands. tstc() should return true if
console_input_buffer is not empty.
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Handle value == NULL similiar to how value == '' is currently handled.
hush's builtin_getopt() seems to trigger this for OPTARG.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Normally the default path to save the environment is /dev/env0. However,
we can't map a file in a fat filesystem to /dev/env0. So if we want to
store the environment in a file in fat we have to make it configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For some environments the dummy malloc functions offer a very small
alternative implementation. malloc will get its memory from sbrk()
and never frees memory again.
This of course is not suitable for interactive environments and thus
depends on CONFIG_SHELL_NONE
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some scenarios like initial bootloaders do not need interactive shell
support, so make this optional. Without a shell a board must provide
its own run_shell function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Environment variables are only useful in interactive environments.
Make it optional on our way to support a noninteractive barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a simple block layer to barebox. Reading and writing
to block devices can be painfully slow without caching, so
add a simple caching layer here.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In a noninteractive environment barebox will be compiled without
command support. So move version_string to a seperate file which
is compiled unconditionally.
Also, display the banner when the simple console support is used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if CONFIG_DEFAULT_ENVIRONMENT_PATH="" then
$(DEFAULT_ENVIRONMENT_PATH) expands to 'defaultenv "" '
The "" would cause every single file found in $(srctree) to be included in
$(ENV_FILES). This would then cause scripts/mod/sumversions.c to get
recompiled using $(CC) and fail compilation if $(CC) points to a newlib
cross compiler
Signed-off-by: Jon Ringle <jon@ringle.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this kallsyms finally start working at least on ARM. This
enables us resolving addresses into symbols which is particularly
useful in combination with stack unwinding support. As kallsyms
now compile and work we can remove the depends on BROKEN.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The menu entry to set the default baudrate (CONFIG_BAUDRATE) makes no sense,
as long as its content is not used. This patch makes barebox using the setting
again.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ensures subsequent init functions to export environment variables during
init without having to rely on linking order being correct.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox does not have interrupt functionality. Nevertheless it's
sometimes useful to periodically call functions, like for example
a heartbeat LED or watchdog reset. Instead of cluttering the code
with calls to these functions this patch adds a generic polling
infrastructure. Code which might run for longer now can call
poller_call() periodically which in turn will call all registered
pollers.
This patch adds a call to poller_call in two generic pathes. First
of them is getc() which covers waiting for uart input. Second is
ctrlc() which should be called anyway from code which might run
for longer. So instead adding poller_call directly to your code,
consider checking ctrlc instead which also gives additional
convenience to the user.
The poller code is safe against reentrancy which means that it's
safe to call poller_call inside a poller.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commands/loadb.c doesn't build with CONFIG_CONSOLE_SIMPLE, because it uses
fprintf / for_each_console (which uses console_list).
Fix it by adding trivial implementations of both in console_simple.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Silence these warnings:
common/kallsyms.c:8: Warning: documented function `const u8 kallsyms_names' was not declared or defined.
common/kallsyms.c:10: Warning: documented function `const u8 kallsyms_token_table' was not declared or defined.
common/kallsyms.c:11: Warning: documented function `const u16 kallsyms_token_index' was not declared or defined.
common/kallsyms.c:13: Warning: documented function `const unsigned long kallsyms_markers' was not declared or defined.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The function names do not make it clear what return value
is expected and do not save a single line of code. Put
the code inline and unbreak the wrong checks introduced
with a3c1e5d888.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Eric Bénard <eric@eukrea.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
use getopt to simplify it and prepare for xmodem support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will we usefull to enable functionnality if used
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Positional parameters are not nice, so implement a getopt
function. This has to be done as a builtin because otherwise
we have no access to the parents argc/argv.
getopt works as expected, here is a little example:
while getopt "hs:" OPT
do
if [ $OPT = h ]; then
echo "usage"
exit 1
else
echo "scr: opt: $OPT optarg: $OPTARG"
fi
done
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix memory leak in globbing part of hush. a simple '['
on the command line was enough to trigger it.
We must call globfree() before setting the glob structure
to zero.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before we duplicate it between command/bootm.c and scripts/mkimage.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before we duplicate it between common/bootm.c and scripts/mkimage.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The __initdata define was present before Jean-Christophe
added it as fake value for Linux compatibility. Rename
the previous define to a different name to avoid
clashes
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow you to create a box style entry
via C API by specifying the type as
struct menu_entry me = {
.display "test",
.type = MENU_ENTRY_BOX,
.box_state = 1,
.action = action_to_run,
}
and via shell
menu -e -a -m <menu> -c <command> [-R] [-b 0|1] -d <description>
menu -e -a -m <menu> -u submenu -d [-b 0|1] <description>
-b with 0 for not selected and 1 for selected
and -c for the command to run when changing state
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to automaticaly run an entry if the user do no choice
this is usefull for boot menu as example
with menu -s -m boot -A 3 -d "Auto Boot in"
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before if you specify id = 0 the next available id will be taken
otherwise fail if already registered now as in linux we use -1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Clients now only have to call menu_add_submenu or menu_add_command_entry
instead of allocating many strings.
This also fixes some problems in the menu code. The priv field in struct
menu_entry was a pointer to struct menu or a pointer to an allocated string.
It was never freed, only had to be freed when it was an allocated string.
The reference to a submenu is now kept as a string and not to the menu
itself. The code checked the existence of the submenu when creating it, but
crashed when the submenu was removed and referenced afterwards. Now the
code hapily allows references to nonexistant menus but complains during
runtime when the menu is not there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
Sascha Hauer
Marc Kleine-Budde
Sanjeev Premi
Antony Pavlov
Alexander Aring
Robert Jarzmik
Juergen Beisert
Jan Weitzel
Carlo Caione
Alexey Galakhov
Peter Korsgaard
Jon Ringle
Marc Reilly
Krzysztof Halasa
Robert Schwebel