As a side effect don't build barebox.S when barebox.bin is updated. I
didn't manage to keep the old behaviour and I consider it cleaner this
way.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The value read at the pin is provided by Sample Status Register, not the
Data Register.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Newer Freescale 3-Stack development systems are equipped
with 64MiB of DDR2 SDRAM, instead of the 128MiB of mDDR SDRAM
with which earlier versions were shipped.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While at it remove some unused code and an unbalanced
enable_interrupts().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Copy the behaviour from Linux which does:
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
...
(Notice the third parameter which is simply chip->start).
Solves erase problems with SST flashes.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
tftp returns transfered bytes on success and 1 in error case. Bad for
scripting. Change to 0 on success
Signed-off-by: Jan Weitzel <J.Weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if fec was allocated using malloc. if fec->miiphy->dev->driver != 0
miiphy_probe is not called
Signed-off-by: Jan Weitzel <J.Weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Changed register names in f3s_pmic_init_all so that they have
the same effect with the corrected address values.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These values dervied from Freescale source code for the mc9s08dz60
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch enabled support for the Sharp QVGA LCD panel of the MX21ADS board.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch allows using the i.MX (LCDC) framebuffer driver on boards
using an i.MX21 SoC.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For some weird reason this fixes nand boot on i.MX21. Since
interrupts are globally disabled it doesn't hurt on other
SoCs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also, do not allow to continue barebox after returning from the
application since we don't know anything about the state we are in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not need to use memcpy32 in read_buf/write_buf because
in these functions we only access SDRAM and not the internal SRAM
buffer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>