The pattern for i.MX boards starting in external NAND boot mode is always
the same:
- Check if we are running in NFC address space, if not call
board_init_lowlevel_return()
- copy binary to link address
- execute relocated binary
- call imx_nand_load_image()
Add a common function for this to make the board code easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also put those names solely in the .c file as it's done with
the i.MX27 code.
Signed-off-by: Daniel Mierswa <d.mierswa@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Register the USB misc devices and provide convenience wrappers to
register the USB ports for i.MX27.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for initializing DDR3 RAMs on the i.MX53 type
SDRAM controller. The code automatically detects size/layout of
the connected RAM, detects the bus width and which chipselects are
populated.
While I believe this code is not 100% generic, it is far too
sophisticated to stay in a single board directory. I'm sure
other boards could make use of this aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The pll setup function is exported, so it makes sense to export
the convenience wrappers for specific frequencies aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code initializing the SDRAM controller is not at the same
place where SDRAM is registered with barebox. To reduce the
risk of registering wrong SDRAM sizes this patch adds a
driver for the ESDCTL which reads back the configured SDRAM
size and registers the memory found with barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds lowlevel debug functions for i.MX. As we have a great variety
of different UARTs on i.MX currently no Kconfig support for chosing the
correct one is added. Instead we expect the user to add the correct
define and issue a compiler warning if he hasn't.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch sets HPM (Host power mask bit) to bit 16 according to i.MX
Reference Manual. Falsely it was set to bit 8, but this controls pull-up
Impedance.
Reported-by: Michael Burkey <mdburkey@gmail.com>
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The same issue was fixed in the Linux kernel in commit
66ddfc6 (mx35: add a missing comma in a pad definition)
for 2.6.33-rc7.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for an update handler for internal boot. Currently
handled are:
- v1 MMC/SD
- v2 MMC/SD
- v2 NAND
where v1 is found on i.MX25, i.MX35 and i.MX51. v2 is found on i.MX53.
This code intentionally does not use the DCD data compiled into every
i.MX internal boot image. This makes it possible to make a pure second
stage barebox bootable on i.MX internal boot devices later.
This has been tested on the i.MX51 babbage, i.MX53 loco and i.MX53 tx53
board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This redefines the sdram controller registers as offsets to the base
rather than as absolute addresses. All users are fixed to use the
SoC specific base address.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rather than doing this in the SoC specific code just print
it in imx_set_silicon_revision. This saves some lines of code
and also results in i.MX27 now also having the silicon revision
printed during startup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This moves the known i.MX bootsource settings to a single file
so that the code can be shared. Also we add a enum for the different
boot sources so that it can be used in C Code and not only on the shell.
The pcm038 board is changed to use it instead of digging in the registers
manually.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Add a separate header file for the iomux-v1 just like done for
iomux-v3.
- initialize iomux from SoC code so that we do not depend on IMX_GPIO_BASE
anymore.
- define registers as offset to the base rather than absolute addresses
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>