Since we no longer have custom gpio function prototypes we can
drop the prototypes from asm-generic/gpio.h can add them to
include/gpio.h instead. While at it add static inline dummy wrappers
for !CONFIG_GENERIC_GPIO so that code using gpios can compile without
gpio support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
exitcall infrastructure is based on initcall infrastructure.
It allows to have and use exit call hooks on barebox shutdown.
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to collect all sections beginning with __clk_of_table_ in a single
section in the linker using KEEP(*(.__clk_of_table_*)). That the sentinel
entry ended up as the last entry was pure luck, but not always the case.
Instead of putting all entries in different sections we now put all entries
in the same section. Only the sentinel entry gets its own section and is
collected by the linker separately.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Andreas Willig <andreas.willig@rafi.de>
Tested-by: Andreas Willig <andreas.willig@rafi.de>
Most types defined in posix_types.h are architecture independent,
so instead of repeating this for each architecture add a generic
file that can be used by architecture code. To use it an architecture
must define BITS_PER_LONG properly in asm/bitsperlong.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel has __BITS_PER_LONG and BITS_PER_LONG. The formaer
is needed for architectures which support 32bit userspace on a
64bit kernel. This is not relevant for barebox, so drop
__BITS_PER_LONG and use BITS_PER_LONG only.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow init code that depends on the environment being loaded.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As expected, we would need deferred probing sooner or later. This is
a first approach to allow devices to return -EPROBE_DEFER and get
sorted into a list of deferred devices that will be re-probed later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As we will use the best sha algo at runtime
Add a new init level crypto_initcall to ensure that all the sha present
before hmac
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In Linux, these macros are defined in include/asm-generic/bug.h.
To tidy up common.h, move BUG(), BUG_ON(), WARN(), WARN_ON() there.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No architectue implements its own gpio_is_valid() function, so move
the only existing implementation to include/gpio.h where it's available
for all users.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:
- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property
Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.
Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.
There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.
For device tree boards the model and of_compatible tags are automatically
generated.
Example output of the imd tool for a Phytec phyFLEX image:
build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to load all the lowlevel init code, including the
uncompressor, inside SRAM and not just the bare init part. This is
useful when pbl is used as a first-stage bootloader but is loaded by an
external firmware.
Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a macro for linker scripts to place DT clock provider table.
While at it, also add ALIGN(8) to DTB macro and fix a whitespace issue.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the NAND stuff to Linux-3.11-rc1. It is synchronized
as best as we can get:
- locks removed
- The splitting in different files we had to better support different
features has been dropped. Instead this is now done mostly with the
use of __maybe_unused
Some barebox adjustments are forward ported, like:
- Allow partial page writes
- Optionally allow to erase bad blocks
- check for all_ff before writing a page
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the upcoming multi image build process we will cat images together.
To find the concatenated image we need to reliably find the end of the
current binary. This adds a dummy section at the end of a pbl binary.
Its only purpose is to mark the end of the image. The multi image
patches will add something to this section so that it doesn't get
discarded by the linker.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add basic support for the Xilinx Zynq-7000 EPP architecture.
The Zynq-7000 is an embedded processing platform that combines a Cortex A9
dualcore MPSoC with an Artix-7 FPGA.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add rules to generate dtb files from dts/dtsi files,
optionally run the source files through the preprocessor.
Also add a rule to generate object files to include in
the barbox binary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Defining STACK_BASE and MALLOC_BASE only makes sense when
either CONFIG_MEMORY_LAYOUT_DEFAULT or CONFIG_MEMORY_LAYOUT_FIXED
is set, so use separate #ifdefs instead ot #if/#else
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add barebox-data section in arm branch to get complete
barebox regions in sdram regions tree.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows for creating a lzo compressed binary unsing the pbl.
Only copy the piggydata if needed.
Add CONFIG_PBL_FORCE_PIGGYDATA_COPY option
In some case we need to copy the PIGGYDATA as the link address
as example we run from SRAM and shutdown the SDRAM/DDR for
reconfiguration but most of the time we just need to copy the
executable code.
based on Sascha Hauer
Add compressed image support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This allows for creating a pre-bootloader binary for
- nand boot
- mmc boot
- compressed image
The pbl will be incharge of the lowlevel init if needed.
The barebox will skip it.
Import string functions from linux 3.4 (arch/arm/boot/compressed/string.c) and
implement a dummy panic.
For now on introduce dummy zbarebox* targets and c code that will contain later
the decompressor. This only implemeted on ARM.
This patch is based on Sascha Hauer <s.hauer@pengutronix.de>
Add compressed image support patch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The ep93xx needs a special value at offset 0x1000. Rather than
do special handling in the linker file add aa header section
as done on i.MX.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allow to check we do not exceed the size of the SRAM as example
introduce BAREBOX_MAX_BARE_INIT_SIZE the maximum size of bare_init
this will allow your bare_init will fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
on ARM we need to init all the memory before the mmu and before any drivers
use dma_alloc_coherent
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This is useful to detect a barebox image and to be able
to copy only the image size if barebox is stored on
raw partitions which are bigger than the image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will avoid __bswapsi2 issue see with gcc 4.5.1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow us to print information as soon as the console will be enable
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The flash header is used on different i.MXs other than the
i.MX25, so rename it. Also, add a possibility to put a flash
header on different offsets (0x100, 0x400 and 0x1000), needed
for different boot mediums.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces selected generic bitop files from
kernel. We don't need minix, ext2, sched or lock
based bitops. Those have been dropped.
Signed-off-by: Nishanth Menon <x0nishan@ti.com>
Memory layout can now be specified via kconfig options. Two
possibilities exist: default layout means the layout is stack
/ malloc heap / U-Boot. The user can also specify fixed addresses
for each TEXT_BASE / stack / malloc heap.
