This adds a device_node member to struct cdev and a function
to find a cdev by device_node.
This also removes the setting of cdev->dev->device_node in
the of partition parser. We must not set the device since it
may not refer to a partition but to a whole device with partitions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of writing one word to the txfifo and then wait until
one is received in the rxfifo we can write until the txfifos
are not full and read as long the rxfifos contain data. This
makes transfers for the m25p80 driver around 7 times faster
here.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX SPI controller in version 2.3 can immediately start a transfer
when the txfifo is written to. In this mode we no longer have to trigger
the transfer with the xch bit which makes the code a bit simpler.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- make some locally used functions static
- remove read_passwd which is unused
- some refactoring to make code pathes clearer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to have the login functionality in the /env/bin/init script.
This is hard to review and it's too easy to break the login functionality
with changes to this script. Move the places to ask for a password to
C code where we have only a few places where we have to ask for a password.
Mainly these are run_shell() and the menutree command.
This patch introduces a login() function which will only return if the correct
password has been entered. Following calls will return immediately without
asking for a password again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Different devices may report the reset source with different levels
of certainty. For example a SoC may see a power-on reset, but this
may only be because an external PMIC has power cycled the SoC. This
means the PMIC knows the real reason better and thus the reset reason
from the PMIC should be preferred.
This patch introduces priorities for the reset_source to handle the
above scenario. Also add a of_get_reset_source_priority() function
to retrieve the desired priority from the device tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a dev and name member to struct watchdog which helps distinguishing
between different watchdogs. Also add some debugging aids.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Put watchdogs on a list to allow multiple watchdogs. Add a priority
field to be able to pick the highest priority watchdog.
This patch also provides a of_get_watchdog_priority() function to
allow configuring the watchdog priority from the device tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.
The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.
To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some SPI NOR flashes support 4K erase blocks. 4K erase blocks do not
work with UBIFS which needs a minimum erase block size of 15360 bytes.
Also bigger sectors are faster to erase. This patch adds a device tree
option to use the bigger blocks instead of the default 4K blocks.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Not only the array containing the pointers should be const but
also the strings themselves, so instead of using const char **
use const char * const *.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So far we only supported blitting the whole screen from the shadow
fb to the framebuffer. Add a function to blit areas.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fb core now has builtin support for offscreen rendering, use
this and drop offscreen handling in the gui code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For speeding up rendering we need shadow framebuffers. This is currently
implemented in the gui functions. This does not work properly when two
users (splash and fbconsole) use the same framebuffer since in this case
two different shadow framebuffers will be used. This patch implements
shadowfb handling in the fb core directly. With this the fb device gets
a parameter 'shadowfb'. When this is true the fb core will allocate a
shadow fb and provide it to the users.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is based on the code introduced to the kernel in
5f9296ba21b3c395e53dd84e7ff9578f97f24295.
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we no longer have custom gpio function prototypes we can
drop the prototypes from asm-generic/gpio.h can add them to
include/gpio.h instead. While at it add static inline dummy wrappers
for !CONFIG_GENERIC_GPIO so that code using gpios can compile without
gpio support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add empty static inline function fallbacks if backlight support
is not enabled, so that drivers using the backlight don't fail to
build.
Fixes:
In function `simple_panel_ioctl':
undefined reference to `of_backlight_find'
undefined reference to `backlight_set_brightness_default'
undefined reference to `backlight_set_brightness'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have functions to setup the i.MX uart for early use, but these all
depend on DEBUG_LL. Move them to imx-uart.h to make them usable for
the regular PBL console.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With more stuff being done in PBL regular console support gets more and more
useful. This makes the PBL console independent of DEBUG_LL which is only
meant for early debugging but not regular output.
To use the regular PBL console a board must call pbl_set_putc() which stores
a pointer to the putc function to be used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
LoaderTimeInitUSec and LoaderTimeExecUSec are used e.g. in systemd-analyze
to calculate the time spent in the firmare and barebox.
LoaderDevicePartUUID is used to mount the EFI partition to /boot.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch realizes framebuffer console support for barebox. It
supports colors and enough escape sequences to show the barebox
console and editor properly.
fbconsole mini-HOWTO
====================
1. compile sandbox barebox with
CONFIG_VIDEO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_DRIVER_VIDEO_SDL=y
2. run barebox
3. test fbconsole
fbconsole0.active=oe
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allocate the screen dynamically in fb_open. This opens the way to create
a fb_create_screen function which takes a struct fb_info * instead of a
filename. This is suitable for the framebuffer console which already has
a struct fb_info *.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The register defines will be used by the SPI xload code, so move
them to a place where the xload code can include them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
get_pixel converts a 32bit trgb color into framebuffer format. This
is useful for other code aswell, so export it.
Other functions in the graphics utils code use the name get/set_pixel
aswell, but instead of converting data they get a pixel from the framebuffer
or set a pixel on the framebuffer. To separate from these rename the
function to gu_hex_to_pixel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---=== SPD EEPROM Information ===---
EEPROM Checksum of bytes 0-62 OK (0xDF)
Total number of bytes in EEPROM 256
Fundamental Memory type DDR2 SDRAM
SPD Revision 1.2
---=== Memory Characteristics ===---
Maximum module speed 800 MHz (PC2-6400)
Size 2048 MB
Banks x Rows x Columns x Bits 8 x 14 x 10 x 64
Ranks 2
SDRAM Device Width 8 bits
Module Height 30.0 mm
Module Type SO-DIMM (67.6 mm)
DRAM Package Planar
Voltage Interface Level SSTL 1.8V
Module Configuration Type No Parity
Refresh Rate Reduced (7.8 us) - Self Refresh
Supported Burst Lengths 4, 8
Supported CAS Latencies (tCL) 6T
tCL-tRCD-tRP-tRAS 6-6-6-18 as DDR2-800
Minimum Cycle Time 2.5 ns at CAS 6
Maximum Access Time 0.40 ns at CAS 6
Maximum Cycle Time (tCK max) 8 ns
---=== Timing Parameters ===---
Address/Command Setup Time Before Clock (tIS) 0.17 ns
Address/Command Hold Time After Clock (tIH) 0.25 ns
Data Input Setup Time Before Strobe (tDS) 0.05 ns
Data Input Hold Time After Strobe (tDH) 0.12 ns
Minimum Row Precharge Delay (tRP) 15.00 ns
Minimum Row Active to Row Active Delay (tRRD) 7.50 ns
Minimum RAS# to CAS# Delay (tRCD) 15.00 ns
Minimum RAS# Pulse Width (tRAS) 45.00 ns
Write Recovery Time (tWR) 15.00 ns
Minimum Write to Read CMD Delay (tWTR) 7.50 ns
Minimum Read to Pre-charge CMD Delay (tRTP) 7.50 ns
Minimum Active to Auto-refresh Delay (tRC) 60.00 ns
Minimum Recovery Delay (tRFC) 127 ns
Maximum DQS to DQ Skew (tDQSQ) 0.20 ns
Maximum Read Data Hold Skew (tQHS) 0.30 ns
---=== Manufacturing Information ===---
Manufacturer JEDEC ID 7f 98 00 00 00 00 00 00
Manufacturing Location Code 0x05
Part Number
Manufacturing Date 2014-W47
Assembly Serial Number 0x43266892
Signed-off-by: Alexander Smirnov <alllecs@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Complex video pipelines are modelled with the of_graph bindings in
the devicetree. This patch adds a ioctl infrastructure to issue
commands to the remote endpoint of a of_graph. Currently defined
ioctls are prepare/unprepare, enable/disable and get_modes. This
is enough to control LVDS or HDMI encoder or simple panels.
A device node which contains of_graph endpoints can be registered
as a VPL entity. An entity can receive ioctls via the .ioctl callback
and also issue ioctls by calling vpl_ioctl. The core itself will never
iterate over the entire pipeline. Instead, the different VPL entities
should forward an ioctl to the next instance in the pipeline whenever
necessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
exitcall infrastructure is based on initcall infrastructure.
It allows to have and use exit call hooks on barebox shutdown.
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a framebuffer is kept enabled when Linux starts its framebuffer
memory should be reserved. Otherwise Linux may overwrite its contents.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The most standard update handler will simply copy a file to a device.
This can be shared across several users, so add a standard handler for
this operation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
register_preset_mac_address only works when CONFIG_PARAMETER
is enabled because otherwise dev_set_param is a no-op. Add a
function to set the MAC address explicitly without the need
of CONFIG_PARAMETER and use it where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mtd concat layer supports concatenating several MTD devices
into a single one. This is nearly as-is from the corresponding
Kernel code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function is needed for the fixed length string feature in the state
framework.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the parameter to boot from ubifs fileystems. This assumes that
there will be only one UBI device registered in the kernel, otherwise
there is no way to predict the ubi number.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When registering a filesystem device add a device parameter suitable
for the Linux root= option to boot from exactly this filesystem. Currently
the fs layer sets this parameter to the root=PARTUUID= mechanism if a
partuuid is available. Other filesystems like NFS and UBIFS which do
not have a PARTUUID can overwrite this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the partuuid string to struct cdev in order to have this
available for constructing a suitable Linux root=PARTUUID= option
for booting Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a globalvar string function to pass a pointer to a string.
With this we can directly access the string to get the variable and
don't have to getenv() the string first.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Matching a device node is enough since a device node may have
multiple PWMs. Check for a id aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a small backlight layer. It provides a backlight device
on which the brightness parameter can be used to adjust the brightness.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code can be used with slight modifications on i.MX28 aswell.
Add a i.MX28 registration function and move the differences to
function callbacks.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
