Allocate the screen dynamically in fb_open. This opens the way to create
a fb_create_screen function which takes a struct fb_info * instead of a
filename. This is suitable for the framebuffer console which already has
a struct fb_info *.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The register defines will be used by the SPI xload code, so move
them to a place where the xload code can include them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
get_pixel converts a 32bit trgb color into framebuffer format. This
is useful for other code aswell, so export it.
Other functions in the graphics utils code use the name get/set_pixel
aswell, but instead of converting data they get a pixel from the framebuffer
or set a pixel on the framebuffer. To separate from these rename the
function to gu_hex_to_pixel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---=== SPD EEPROM Information ===---
EEPROM Checksum of bytes 0-62 OK (0xDF)
Total number of bytes in EEPROM 256
Fundamental Memory type DDR2 SDRAM
SPD Revision 1.2
---=== Memory Characteristics ===---
Maximum module speed 800 MHz (PC2-6400)
Size 2048 MB
Banks x Rows x Columns x Bits 8 x 14 x 10 x 64
Ranks 2
SDRAM Device Width 8 bits
Module Height 30.0 mm
Module Type SO-DIMM (67.6 mm)
DRAM Package Planar
Voltage Interface Level SSTL 1.8V
Module Configuration Type No Parity
Refresh Rate Reduced (7.8 us) - Self Refresh
Supported Burst Lengths 4, 8
Supported CAS Latencies (tCL) 6T
tCL-tRCD-tRP-tRAS 6-6-6-18 as DDR2-800
Minimum Cycle Time 2.5 ns at CAS 6
Maximum Access Time 0.40 ns at CAS 6
Maximum Cycle Time (tCK max) 8 ns
---=== Timing Parameters ===---
Address/Command Setup Time Before Clock (tIS) 0.17 ns
Address/Command Hold Time After Clock (tIH) 0.25 ns
Data Input Setup Time Before Strobe (tDS) 0.05 ns
Data Input Hold Time After Strobe (tDH) 0.12 ns
Minimum Row Precharge Delay (tRP) 15.00 ns
Minimum Row Active to Row Active Delay (tRRD) 7.50 ns
Minimum RAS# to CAS# Delay (tRCD) 15.00 ns
Minimum RAS# Pulse Width (tRAS) 45.00 ns
Write Recovery Time (tWR) 15.00 ns
Minimum Write to Read CMD Delay (tWTR) 7.50 ns
Minimum Read to Pre-charge CMD Delay (tRTP) 7.50 ns
Minimum Active to Auto-refresh Delay (tRC) 60.00 ns
Minimum Recovery Delay (tRFC) 127 ns
Maximum DQS to DQ Skew (tDQSQ) 0.20 ns
Maximum Read Data Hold Skew (tQHS) 0.30 ns
---=== Manufacturing Information ===---
Manufacturer JEDEC ID 7f 98 00 00 00 00 00 00
Manufacturing Location Code 0x05
Part Number
Manufacturing Date 2014-W47
Assembly Serial Number 0x43266892
Signed-off-by: Alexander Smirnov <alllecs@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Complex video pipelines are modelled with the of_graph bindings in
the devicetree. This patch adds a ioctl infrastructure to issue
commands to the remote endpoint of a of_graph. Currently defined
ioctls are prepare/unprepare, enable/disable and get_modes. This
is enough to control LVDS or HDMI encoder or simple panels.
A device node which contains of_graph endpoints can be registered
as a VPL entity. An entity can receive ioctls via the .ioctl callback
and also issue ioctls by calling vpl_ioctl. The core itself will never
iterate over the entire pipeline. Instead, the different VPL entities
should forward an ioctl to the next instance in the pipeline whenever
necessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
exitcall infrastructure is based on initcall infrastructure.
It allows to have and use exit call hooks on barebox shutdown.
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a framebuffer is kept enabled when Linux starts its framebuffer
memory should be reserved. Otherwise Linux may overwrite its contents.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The most standard update handler will simply copy a file to a device.
This can be shared across several users, so add a standard handler for
this operation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
register_preset_mac_address only works when CONFIG_PARAMETER
is enabled because otherwise dev_set_param is a no-op. Add a
function to set the MAC address explicitly without the need
of CONFIG_PARAMETER and use it where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mtd concat layer supports concatenating several MTD devices
into a single one. This is nearly as-is from the corresponding
Kernel code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function is needed for the fixed length string feature in the state
framework.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the parameter to boot from ubifs fileystems. This assumes that
there will be only one UBI device registered in the kernel, otherwise
there is no way to predict the ubi number.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When registering a filesystem device add a device parameter suitable
for the Linux root= option to boot from exactly this filesystem. Currently
the fs layer sets this parameter to the root=PARTUUID= mechanism if a
partuuid is available. Other filesystems like NFS and UBIFS which do
not have a PARTUUID can overwrite this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the partuuid string to struct cdev in order to have this
available for constructing a suitable Linux root=PARTUUID= option
for booting Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a globalvar string function to pass a pointer to a string.
With this we can directly access the string to get the variable and
don't have to getenv() the string first.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Matching a device node is enough since a device node may have
multiple PWMs. Check for a id aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a small backlight layer. It provides a backlight device
on which the brightness parameter can be used to adjust the brightness.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code can be used with slight modifications on i.MX28 aswell.
Add a i.MX28 registration function and move the differences to
function callbacks.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to collect all sections beginning with __clk_of_table_ in a single
section in the linker using KEEP(*(.__clk_of_table_*)). That the sentinel
entry ended up as the last entry was pure luck, but not always the case.
Instead of putting all entries in different sections we now put all entries
in the same section. Only the sentinel entry gets its own section and is
collected by the linker separately.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Andreas Willig <andreas.willig@rafi.de>
Tested-by: Andreas Willig <andreas.willig@rafi.de>
Currently code needs to fiddle with the active parameter of a console
device directly to enable/disable consoles. Add console_set_active()
to set the status and console_get_active() to get the current status.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dhcp/bootp was bound to the command functionality.
This patch splits the dhcp command.
We are now able to use bootp without a shell.
This patch adds also a check for environment variables and globalvar.
So only when ENVIRONMENT_VARIABLES and GLOBALVAR is set, all received
dhcp data will be stored.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The nlink_t type is unused in barebox, so drop it. This prevents
compile failures when architectures use the generic posix_types.h
which no longer has __kernel_nlink_t defined.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most types defined in posix_types.h are architecture independent,
so instead of repeating this for each architecture add a generic
file that can be used by architecture code. To use it an architecture
must define BITS_PER_LONG properly in asm/bitsperlong.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes the following warning:
CC arch/arm/boards/foo/board.o
In file included from arch/arm/boards/foo/board.c:22:0:
include/habv4.h:24:19: warning: function declaration isn't a prototype [-Wstrict-prototypes]
static inline int habv4_get_status()
^
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel has __BITS_PER_LONG and BITS_PER_LONG. The formaer
is needed for architectures which support 32bit userspace on a
64bit kernel. This is not relevant for barebox, so drop
__BITS_PER_LONG and use BITS_PER_LONG only.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of letting all architectures define their own dma_addr_t use
a common place in include/linux/types.h and use a Kconfig symbol that
architectures can select to define the width of dma_addr_t. The same
is done in the Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 2e6a88f210 (add cpu native ordered io accessors) introduced
these macros and then commit be57f20cdd (Fix big endian MMIO
primitives) figured out they are equivalent to __raw_{read,write}*.
They turned out unnecessary after all. Anyway, most source files
use __raw_read* and __raw_write*.
Let's replace a few remaining references and abolish them.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function is needed when a device that already registered a fixup in
the probe routine fails later to probe completely. Without unregistering
the fixup the function might later be called with invalid data.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch improves the backend property, it can be either a phandle or a
of_path. During probe() of the state driver the backend property is
dereferenced and the resulting of_path is saved in the state context. In a
later patch it will be used to generate a phandle reference to the backend
during DT fixup.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow init code that depends on the environment being loaded.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add two functions to calculate values for UBMR and UBIR
registers. This way both early serial initalization code and
serial_imx.c can use them and not duplicate the code.
Singed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move UART definitions into a separate file to avoid redefinition in
<mach/debug_ll.h> and magical constants in low level UART
initialization code.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
USB requests should be processed within a timeframe of 5s.
The linux kernel also uses this timeout value for the control packets.
For the musb the increase in timeout helps successfully probing USB devices
(at least on one test hardware), but on the other hand doesn't slow down the
system, if there are no devices, i.e. the timeout never hits. That means,
that the USB core correctly aborts instead of timing out.
Why and how the 100ms was chosen in the first place, can not be deduced from
the git history, just that it seems to work fine for most boards.
Change USB_CNTL_TIMEOUT to 5000ms and replace all occurences of
`USB_CNTL_TIMEOUT * x`
with just
`USB_CNTL_TIMEOUT`,
as the timeout is now large enough without it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since 2011 barebox' of_device_id struct uses unsigned long type for data field:
struct of_device_id {
char *compatible;
unsigned long data;
};
Almost always struct of_device_id.data field are used as pointer
and need 'unsigned long' casting.
E.g. see 'git grep -A 4 of_device_id drivers/' output:
drivers/ata/sata-imx.c:static __maybe_unused struct of_device_id imx_sata_dt_ids[] = {
drivers/ata/sata-imx.c- {
drivers/ata/sata-imx.c- .compatible = "fsl,imx6q-ahci",
drivers/ata/sata-imx.c- .data = (unsigned long)&data_imx6,
drivers/ata/sata-imx.c- }, {
Here is of_device_id struct in linux kernel v4.0:
struct of_device_id {
char name[32];
char type[32];
char compatible[128];
const void *data;
};
Changing of_device_id.data type to 'const void *data' will increase
barebox' linux kernel compatibility and decrease number of 'unsigned
long' casts.
Part of the patch was done using the 'coccinelle' tool with the
following semantic patch:
@rule1@
identifier dev;
identifier type;
identifier func;
@@
func(...) {
<...
- dev_get_drvdata(dev, (unsigned long *)&type)
+ dev_get_drvdata(dev, (const void **)&type)
...>
}
@rule2@
identifier dev;
identifier type;
identifier func;
identifier data;
@@
func(...) {
<...
- dev_get_drvdata(dev, (unsigned long *)&type->data)
+ dev_get_drvdata(dev, (const void **)&type->data)
...>
}
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
amba_{g,s}et_drvdata macros from linux kernel use
dev_{g,s}et_drvdata functions.
But in linux dev_get_drvdata() takes only one argument
while in barebox dev_get_drvdata() takes two arguments.
There is no dev_set_drvdata() in barebox at all.
So amba_{g,s}et_drvdata macros from linux are
unusable for barebox.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Registering mbus driver as platform driver is a little late for
some register accesses to work. We have to make sure boot-up
mbus windows are disabled early, so call mbus driver directly
from SoC init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a driver for SPI master by GPIO pins.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a flags argument to the of_find_path() function. The only flag
defined for now is OF_FIND_PATH_FLAGS_BB. When used on NAND devices, the
function returns the bad block aware device (the ".bb" device).
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch factors out the wait-for-key-press loop from the shell command
"timeout" into a sparate file, so that it can be used from C, too.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise compilation may fail with:
include/fdt.h:11:15: error: unknown type name 'uint64_t'
static inline uint64_t fdt64_to_cpu(uint64_t x)
include/of.h:22:19: error: field 'list' has incomplete type
struct list_head list;
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There should be no reason to ever change the data pointed to by id_table
or of_compatible. So make this offical by adding some 'const's.
In Linux the corresponding pointers are marked as const, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev->priv is for private use of the device driver, so do not
use it in the pci core. Instead, introduce a id field in struct
pci_device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
As expected, we would need deferred probing sooner or later. This is
a first approach to allow devices to return -EPROBE_DEFER and get
sorted into a list of deferred devices that will be re-probed later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As hinted in the linux kernel driver, pxa platforms such as mainstone,
stargate and idp have a broken design, where half-word writes not
aligned to a word address are not working.
This patch is a taking back the half-word write accessor for this
specific case from the linux kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit b8a1bb1dd2 (pci: defer device registration until after bridge setup)
changed the activation order of devices, so that bridges above the devices could
be configured properly before activating the devices below. This commit failed
to acknowledge that there may be devices located directly on the root bus without
any bridge in between and so those devices would never get enabled.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
current implementation
$ ls -al build/versatilpb/arch/arm/pbl/zbarebox.bin
-rw-r--r-- 1 root root 211095 Mar 24 13:21 build/versatilpb/arch/arm/pbl/zbarebox.bin
linux generic implementation
$ ls -al build/versatilpb/arch/arm/pbl/zbarebox.bin
-rw-r--r-- 1 root root 210829 Mar 24 13:21 build/versatilpb/arch/arm/pbl/zbarebox.bin
on a compressed lzo barebox we will 266 bytes
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As we will use the best sha algo at runtime
Add a new init level crypto_initcall to ensure that all the sha present
before hmac
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to have hw driver or asm optimised driver.
Use a priority level to determine which one to use at runtime.
The generic one will be 0.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
such as RSA as we load a DER key we will detect the key size
at runtime and so the algo length.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
such as for hmac(xxx) you must provide a key
This will allow to enforce the correct parameter at digest command
<digest>sum is not impacted
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
That can be used for digest calculation and verify
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Kernel, put into the same place as in the kernel,
although the hexdump.c does not actually contain hexdum functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow as example to list the currently supported digest.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to generate a KEY + IV based on a password and salt for AES
encryption/decryption as example
or simply the key for hmac or rsa from text password
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Combination of @init and @update and @final. This function
effectively behaves as the entire chain of operations, @init,
@update and @final issued in sequence. This is added for hardware
which cannot do even the @finup, but can only do the whole
transformation in one run.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to compare a md with the original one
When calling this do not call final
For RSA_SIGN verification final does not exist only verify
as final will be for signing
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
expect the key to be set before calling
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sync the pci register definitions with Linux 4.0-rc1. Some are needed
for the upcoming designware pcie driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
pass the key via -h param
barebox@barebox sandbox:/ sha256sum -h test /dev/fd0
c297473e9bb221c5dc51d47ad75c76095f1bdc4ca9dff1d5931c2e22bf11a0de /dev/fd0 0x00000000 ... 0xffffffffffffffff
use the same idea as openssl command
$ openssl dgst -sha256 -hmac "test" TODO
HMAC-SHA256(TODO)= c297473e9bb221c5dc51d47ad75c76095f1bdc4ca9dff1d5931c2e22bf11a0de
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the hmac algo will be registered as hmac(%s) such as hmac(sha256)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Kernel, put into the same place as in the kernel,
although the hexdump.c does not actually contain hexdum functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a framework to describe, access, store and restore a set of
variables. A state variable set can be fully described in a devicetree node.
This node could be part of the regular devicetree blob or it could be an extra
devicetree solely for the state. The state variable set contains variables of
different types and a place to store the variable set.
For more information see:
Documentation/devicetree/bindings/barebox/barebox,state.rst
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now you need to call digest_alloc and when you finish to use it digest_free.
We need this for upcomming aes encryption support and secure boot
as we will need multiple instance of the same digest.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to move from a one at a time digest to a multi-instance
with too much impact on the code using it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 03b59bdb64 (paramter: The dev_add_param_*() return ERR_PTR(),
change no-ops to return ERR_PTR(-ENOSYS) instead of NULL) started using
ERR_PTR and errnos without including the relevant header.
This fixes the build for a lot of configurations.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This better separates the DMA from the MMU functionality.
Also move all drivers that only depends on asm/mmu.h for the alloc
functions over to the common header.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow us to implement cache maintenance in a platform
agnostic way.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is needed for container_of() and this header falls
over if we change the include order.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is required for Rockchip SoCs where clock settings registers have
write-enable mask in high word.
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>