Move PIT driver code to 'drivers/clocsource' and accomodate it by
adjusting Kconfig variables. Rename the file to 'timer-atmel-pit.c' to
re-align the driver with code in Linux kernel.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use VERSION register instead of CPU type to determine IP block's version
and capabilities. This what corresponding Linux kernel driver does.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On AT91 GPIOs default to being inputs, so we need to explicitly
configure CS gpio to being an output.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Zero ehci_data before using it as an argument for echi_register,
otherwise bogus values (some of which are interpreted as callbacks) will
be passed through, resulting in illegal memory accesses.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Store driver data in per-device private variable as opposed to storing
it in global vairables.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Port Linux kernel algorithm for both of_device_is_compatible() and
of_match_node(). With this change former now returns a score on the
scale of 0 to INT_MAX/2, and the latter goes through all compatiblity
entries and selects the entry that has the best matching score.
This is needed for SoCs where IP blocks are backwards compatible and
corresponding OF nodes can proclaim compatibility with several entries
found in driver's compatiblity table. One such example would be PIO
pinctrl block on AT91SAM9x5 SoCs which declare compatibility with with
both "atmel,at91sam9x5-pinctrl" and "atmel,at91rm9200-pinctrl".
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since fc10539f7d the usbmisc pointer must be stored in dev->priv,
but dev->priv has never been set. Fix this.
Fixes: fc10539f7d usb: imx: Make usb-misc multi instance safe
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Depending on CONFIG_DRIVER_VIDEO_IMX_IPUV3 to decide whether to
gate IPU clocks or not is rather fragile. Any inadvertent
dependency on the IPU (like setting the NoC AQoS registers for
i.MX6QP) will result in a freeze if CONFIG_DRIVER_VIDEO_IMX_IPUV3
is disabled.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make COMMON_CLK_OF_PROVIDER depend on OFTREE, this way checking for:
defined(CONFIG_OFTREE) && defined(CONFIG_COMMON_CLK_OF_PROVIDER)
can be simplified to just:
defined(CONFIG_COMMON_CLK_OF_PROVIDER)
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Port of_clk_get_parent_count() and of_clk_parent_fill() from Linux.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pin number, as specified in OF pinumx entries, is relative to each bank
start, whereas both at91_mux_pin() and at91_pinctrl_set_conf() asssume
absolute pin numbering, so we need to take into account each bank's pin
base and convert pin number appropriately. Failing to do so results in
any pinmux configuration being applied to pins in bank A.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if not set, barebox will use first console by default.
On this board first console is KEYBOARD_GPIO, so we will end
in unusable state.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This code was rewrtitten from mxs-usb-loader.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
we need to copy the logo section too
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
with this we can be hw generic
If the EFI implement timestamp protocol we could use instead of event
but even EDK2 Never Ever compile it for any target.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can dynamicly register the device
As we may need to use HW IP for clocksource.
As on EFI we could use Timestamp GUID if present (Not often the case as it's
not even enabled by default on any Target on EDK II not even OVMF)
Or if we choose we could use a Simulated Timestamp driver that work on Event
(Add Later)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
And registered it as soon as possible (at pure initcall).
So we not need to check the cs all the time.
As get_time_ns() is one of the most called function of barebox at runtime.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use the one with the most priority.
We can not select the clocksource at user level.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use device/driver model
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use device/driver for the timer
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So now we can stop to use the efi-stdio as this driver
print on the Framebuffer and the serial at the same time.
This is specially usefull if we want to use the framebuffer via efi-gop for
something else.
Do not forget to disable the efi-stdio device before enabling the console
otherwise you will get double printing.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can inspect easly what is supported by the EFI implementation we running on
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This alllow us to known where we boot from
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Andrey Smirnov
David Jander
Oleksij Rempel
Jean-Christophe PLAGNIOL-VILLARD
Michael Olbrich