The patch fixes these sphinx issues:
barebox/Documentation/boards/aarch64-qemu-virt.rst:7: WARNING: Title underline too short.
Running barebox on QEMU aarch64 virt machine
^^^^^^^^^^^^^^^^^^^^^^^
barebox/Documentation/boards/aarch64-qemu-virt.rst:1: ERROR: Document or section may not begin with a transition.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The patch fixes these sphinx warnings:
barebox/Documentation/boards/mips/tplink-mr3020.rst:31: WARNING: Could not lex literal_block as "c". Highlighting skipped.
barebox/Documentation/boards/mips/tplink-mr3020.rst:40: WARNING: Could not lex literal_block as "c". Highlighting skipped.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Amazon Model No. D00901 Kindle3 is an E-Book reader based on the
i.MX35 SOC. The device boots in internal boot mode from a build-in eMMC,
alternatively the device may be set into USB-downloader mode when the
Vol+ key is pressed on startup.
Add support for this device and make barebox a drop-in replacement for
the factory shipped u-boot image.
Constraints for the use as drop-in replacement:
- imximg header (offset 0x400) has a maximum size of 2kB minus 16 byte
since the last 16 bytes are used to store a vendor specific hardware
desctription identifier
- the bootloader space (application plus env) is limited to 256kB minus
16 bytes when installed with offset of 4kB (the u-boot offset was 3kB).
A vendor specific device identifier is stored in the gap between
application and kernel. The vendor specific identifiers should not
be overwritten.
Notable features:
- Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard)
- Full support for vendor specific ATAGs
- usbserial barebox console access by pressing Select button at startup,
alternatively full console support on connector J14.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The iMX35 SOC supports both internal and external boot mode, and both modes
are supported by barebox.
The iMX35 is the latest SOC with support for this mode, none of the later
iMX series iMX50, 51, 53, 6SL, 6SDL, 6DQ, 7S or 7D does support it.
Let's complete the list.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This enabled multi image support for the Garz&Fricke Vincell board. Also
it adds the Vincell-LT as a second image with a separate device tree.
Previously we used the same image on both the Vincell and the Vincell-LT
image since the differences are not that significant for barebox. Still
this was good for quite some confusion internally, so let's properly
introduce a second image.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit add a very basic code to allow Barebox to be booted from
IRAM. Given that the amount of IRAM on most i.MX variants is
insufficient to contain a copy of Barebox with any reasonable degree
of functionality this code uses IRAM only as a temporary location and
eventually bootstraps from DRAM. But the presense of the intermediate
IRAM-only stage allows to add provisions to test the area of DRAM that
Barebox would be using to facilitate various testing scenarious.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
Documentation/boards/am335x.rst:51: WARNING: Title underline too short.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add script to automatically import and fixup the autogenerated handoff files
into the board folder.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
GXemul supports MIPS Malta but with some limitations.
The most notable problems:
* PCI-enabled barebox just hangs under GXemul;
* by default gxemul uses 5Kc processor,
so we have to force MIPS32R1 processor usage.
To fix these problems the special gxemul-malta_defconfig
is introduced and the board's documentation is updated.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX and MXS differs in their global documentation. Honor this.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Those cause a warning while generating the docs
as well as misrendering of the generated docs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This script extracts the socfpga sequencer from a generated u-boot
automagically. The resulting changes of the barebox tree should be
enough to compile with the new sequencer.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Juergen Borleis
Uwe Kleine-König
Sascha Hauer
Alexander Kurz
Antony Pavlov
Wadim Egorov
Raphael Poggi
Steffen Trumtrar
Andrey Smirnov
Robert Schwebel
Andrey Panov
Ulrich Ölmann
Lucas Stach
Markus Pargmann