This introduces some new environment variable helpers and updates
the existing ones. Newly introduced are:
getenv_bool: read a bool variable
getenv_ul: read an unsigned long variable
getenev_uint: read an unsigned int variable
getenv_nonempty: like normal getenv, but does return NULL instead of an
empty string
All new helpers take a pointer to the value. This value is only modified
when the variable exists. This allows the following programming scheme:
unsigned int myvalue = sanedefault;
getenv_uint("myvalue", &myvalue);
So without checking the return value myvalue contains the best possible
value.
getenv_ull is updated to this scheme.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This replaces the 'boot' script in the defaultenv-2 with a command
with the same behaviour. A command gives more flexibility for future
externsions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In theory we can overwrite a builtin command with a script. However,
I don't know a single case where this has been done. Scripts are
often more unflexible than commands so it's unlikely that a script
can extend the functionality of a builtin command. Moreover, the
internal command is no longer accessible once it's overwritten by
a script.
Invert this logic so that a builtin command can overwrite an existing
script. This will help when the 'boot' script is converted to a
builting command. Then with old environments the builtin command will
be used instead of the script.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootm code is now independent from the actual bootm command, so
compile the ARM specific bootm code based on CONFIG_BOOTM and not on
CONFIG_CMD_BOOTM.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to use struct image_data as the central data structure for bootm and
also as the input data structure. This makes it unclear which of the fields
are actually input data. This patch creates a struct bootm_data which is
exclusively used for input data to make usage clearer.
Also it moves the dispatching of multifile uImage pathnames to the core bootm
code so that the core code gets more flexible and the command code simpler.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The data caches should be invalided once during startup. This should
also be done when we do not have the MMU enabled in barebox because
the Kernel does not invalidate the caches during start.
To make this sure this patch enables the arm_early_mmu_cache_invalidate
function even if MMU support is disabled. Additionally this patch adds
calls to arm_early_mmu_cache_invalidate in start.c and uncompress.c.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some of the irq can still be on after a reset or power on as the IP are
powered by the backup power. This could lead to an interrupt dead lock
when the kernel boot. So disable them before booting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
we need to power on the PLL when enabling the USB clock.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since the switch to common clock, ethernet driver doesn't works and
and access to the network leads to :
eth0: Read MDIO failed...
unable to handle NULL pointer dereference at address 0x000000c7
The problem is that bit 31 (SLEEP) of register HW_CLKCTRL_ENET is kept
to its default value (1) which means : "put Ethernet block in sleep mode.
CLK_H_MAC0(1), CLK_H_MAC0(1)_S, and CLK_ENET0(1)_TX are gated off.
Ethernet can be wakeup remotely in sleep mode"
In that case the FEC don't get its clock.
This patch fix the problem by toggling this bit when FEC's clock is
enabled.
Tested on i.MX28EVK.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the check is wrong as when the clock rate is correctly set
the function will return 0.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
when the bootmode is different than NAND (USB for example), the
GPMI clock is not enabled thus we can't probe a NAND flash.
Tested on an i.MX28
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since the switch to common clock, SPI driver reports :
MXS: Timeout resetting block via register 0x80014000
mxs_spi mxs_spi2: MXS SPI: Timeout waiting for start
The reason is that the clock is not enabled anywhere in
the driver.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c: In function 'cfa10036_devices_init':
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c:123:3: warning: implicit declaration of function 'imx_gpio_mode' [-Wimplicit-function-declaration]cfa10036: fix warning
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
drivers/serial/serial_auart.c:49:22: fatal error: mach/mxs.h: No such file or directory
and
drivers/serial/serial_auart.c: In function 'auart_serial_init_port':
drivers/serial/serial_auart.c:174:2: warning: implicit declaration of function 'stmp_reset_block' [-Wimplicit-function-declaration]
only compile tested ATM
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
drivers/spi/mxs_spi.c:29:22: fatal error: mach/mxs.h: No such file or directory
and
drivers/spi/mxs_spi.c: In function 'mxs_spi_setup':
drivers/spi/mxs_spi.c:102:2: error: too few arguments to function 'stmp_reset_block'
include/stmp-device.h:21:12: note: declared here
only compile tested ATM
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For the MPC85xx family of SOCs Linux expects any boot firmware
information to be passed in the first 64MiB of memory. This adds support
to ensure that the device tree is relocated to a valid location if it is
outside that address range.
For the other SOC family currently present in the ppc architecture, the
default is not to relocate as at Linux startup the virtual address
equals the physical address.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for populating derived properties of the mpc85xx SOC
which are not typically included in the dtb directly.
This update is based on U-Boot code from common/fdt_support.c
and arch/powerpc/cpu/mpc85xx/fdt.c - version git-2b26201.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a network device has not been registered from the devicetree, we may
still find it by its alias in the devicetree. This way also platform based
network devices can obtain a valid MAC address in the devicetree.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Import of_find_node_by_type from Linux drivers/of/base.c -
commit id d8dfad3.
This function retrieves a node pointer based on the "device_type"
property of the node.
This is used by device tree update functions in PPC support.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- compile in thumb2 mode for a smaller binary
- increase TEXT_BASE to get more memory space
- set malloc size to zero for autodetection
- enable some more commands
- disable MCI_STARTUP, it's no longer needed and saves some time
during boot
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Convert to static inline functions and use lower case letters for function
names. Also, include mach/debug_ll.h when an architecture provides support
for debug_ll, not only when it's actually enabled. This allows architecures
to put some UART initialization code into mach/debug_ll.h which is compiled
out when debug_ll is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Dmitry Smagin
Jean-Christophe PLAGNIOL-VILLARD
Fargier Sylvain
Eric Bénard
Renaud Barbier
Teresa Gámez
Jan Luebbe