When building a special image from the original (compressed or
not) binary, to not overwrite KBUILD_BINARY.
This allows producing multiple images (such as MLO, UBL, ...)
from the (z)barebox.bin. In the case where no special image is
used, KBUILD_IMAGE is set to KBUILD_BINARY.
This patch was developed together with Sascha Hauer. Thanks!
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we are smaller than the 256KiB reserved for barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we are smaller than the 256KiB reserved for barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The IMX i2c driver is to be used by SOCs on both the ARM and PPC architetures.
Use a more neutral name for the structure, function names and #define.
The driver name is now "i2c-fsl".
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
struct mc13xxx is dereferenced to be able to use dev_info. This is
not necessary since the informations are not mc13xxx related but
3stack related.
- remove unneeded mc13892 raw version printout
- use printk for telling that the init sequence failed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a second bootstream was used, there was a sanity check which was not
only wrong (using erasesize instead of writesize) but also superfluous
(we got the block from an existing cdev, so it must be in the flash
range). Simply remove it to make bcb work as expected.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a function to take the usbphy1 through its initialization procedure.
The imx6_usb_phy1_disable_oc function is needed at least on the sabrelite,
as the power design is faulty. The state on other imx6 boards is unknown,
therefore it is an extra function call at the moment.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
tested with a m25p128 flash both in nand boot & spi boot.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change clock init to allow early gpio access. Add support for 4460 clocks.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
based on: [U-Boot] [PATCH v 4/5] omap4: support TPS programming
TPS62361 is the new power supply used in OMAP4460 that
supplies vdd_mpu.
VCORE1 from Phoenix supplies vdd_core and VCORE2 supplies
vdd_iva. VCORE3 is not used in OMAP4460.
Signed-off-by: F. Gasnier fabrice.gasnier@cenosys.com
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that __mmu_cache_* restore the registers they can be called
as regular C functions. Create a header file for them and use
C functions rather than inline assembly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Save/restore the registers used in __mmu_cache_* so that they can
be called as regular C functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
initrd_start need to be init to data->initrd_address and updated only if the
addr is invalid.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
All other linker generated files are there, too, so it seems logical
to put the map file there aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
If pbl support is enabled only zbarebox.bin was built, but
not the SoC specific images. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
use $< rather than barebox.bin directly
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
With pbl support enabled most boards need a pbl-y for their lowlevel
stuff.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The existing nand_boot functions all do the same, so move it to
a common place. To be flexible enough for future boards the real
image size is used instead of hardcoded 256k.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The flash header is needed for pbl support, so move it to
separate file to be able to add it to pbl-y
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Depending on the SoC a barebox.bin, barebox.netx, barebox.s5p, MLO image
is generated. With pbl support there now is an additional
arch/arm/pbl/zbarebox.bin image.
To help the user to determine which image should be flashed to his device,
generate a barebox-flash-image link.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Use the prefetch engine to improve NAND performance. The howto
is derived from the Kernel. Unlike the kernel we do not make
the access mode configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of passing several options into the nand register function
it is much more straight forward to just pass the platformdata.
While at it, rename the function to omap_add_gpmc_nand_device to
better describe what it does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch prevents to stop the autoboot randomly for the CALAO MB-QIL-A9260.
Indeed on this board, there's no pull-up on the RX inputs for the DBGU, COM1 & COM2 serial port.
With pull-up enabled, there's no longer unwanted character received from these console (CONFIG_CONSOLE_ACTIVATE_ALL=y).
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>