Embedding struct ata_ioports into struct ide_port saves us an allocation.
Making it available to client drivers is necessary to give them access
to struct ata_port which is needed in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To get persistent devicenames under /dev/ allow to set the
devicename from the driver instead of using "ata" unconditionally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We need ata_id_has_lba48() in another C file, so move
the ATA_ID_* stuff to include/ata_drive.h like in the Linux
Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the info is device specific and not driver specific, attach
the callback to the device. This makes it possible to have a info
callback for a device which does not have a driver attached.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DISK_DRIVE is missing in Kconfig, so remove the "select" statement.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that we have framework support for delayed probing of
ata devices implement it in the ahci driver to actually make use
of it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ata device usually take a long time to spin up, so it makes sense
to only spend this time when the device is actually used.
This adds a logical ata device and attaches a 'probe' parameter
to it, similar to what MMC does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The following commit accidently bailed out if the link is up, not
when it's down as stated in the commit message.
| commit a3f74d928c
| Author: Rob Herring <rob.herring@calxeda.com>
| Date: Mon Feb 11 18:02:00 2013 +0100
|
| ahci: handle COMINIT received during spin-up
|
| Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes
| the link to go down and we need to re-initialize the link.
|
| Signed-off-by: Rob Herring <rob.herring@calxeda.com>
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
calxeda use the generic driver but have it's own compatible cf Linux kernel
Documentation
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes
the link to go down and we need to re-initialize the link.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox not contain symbol DISK_DRIVE, so remove all references to it.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the glue code for the i.MX SATA controller. This controller
needs some i.MX specific setup and some SoC specific setting outside
the controller itself. The code for setting up the correct clock source
for the SATA phy has been taken from U-Boot.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds ahci controller support based on U-Boot ahci support. Unlike
U-Boot we do not push the SCSI layer in between, but use the ata interface
directly. Tested on a Freescale i.MX53.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ATA devices using DMA may need a sufficiently aligned buffer, so use
dma_alloc instead of regular malloc.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we only support oldschool IDE SFF devices. This is done
by registering a register layout struct and everything else is done
by the generic IDE SFF driver. Since modern ATA devices still use
ATA, but not the SFF interface anymore, split out the IDE SFF support
to a separate file to allow for other types of ata interfaces.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some status flags are wrong, fix them. All of them are currently unused,
so no functional change included.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using /dev/disk* for every type of device is not helpful. It increases
the chance that the user doesn't know which file corresponds to which
device. So rename ata device files to /dev/ata*. Also add a dev_info
about which device just has been registered.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Straight forward driver, we only have to configure some additional
bits and then use the generic ide support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Linux Kernel defines only one of __LITTLE_ENDIAN and
__BIG_ENDIAN. Endianess can then be tested with #ifdef __xx_ENDIAN. Userspace
always defined both __LITTLE_ENDIAN and __BIG_ENDIAN and byteorder can then
be tested with #if __BYTE_ORDER == __xx_ENDIAN.
As we tend to use a lot of Kernel code in barebox we switch to use the kernel
way of determing the byte order.
As this always causes a lot of confusion add a check to include/common.h to
make sure only one of __LITTLE_ENDIAN and __BIG_ENDIAN is defined.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This simple driver enables a generic driver for ATA type of devices to get
access to the so called 'register file' of an ATA drive.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This changed patch removes more of the u-boot like code and replace it with
kernel like code.
commit 2a8966936af6b54573483ade559d0633e489b515
Author: Juergen Beisert <jbe@pengutronix.de>
Date: Fri Sep 30 15:06:26 2011 +0200
ATA Disk Support: Add support for native ATA type drives
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the BIOS to access attached hard disks means a full disk driver, not only
an interface to the drives.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
'ATA' means more an interface than a disk drive. Change the names to reflect
their real meaning.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The BIOS based disk driver makes no sense without the generic disk support.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Rob Herring
Alexander Aring
Juergen Beisert
Fabian van der Werf