The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes the following warnings:
arch/arm/boards/freescale-mx6-sabrelite/board.c: In function 'sabrelite_ehci_init':
arch/arm/boards/freescale-mx6-sabrelite/board.c:265:2: warning: implicit declaration of function 'imx6_usb_phy1_disable_oc' [-Wimplicit-function-declaration]
arch/arm/boards/freescale-mx6-sabrelite/board.c:266:2: warning: implicit declaration of function 'imx6_usb_phy1_enable' [-Wimplicit-function-declaration]
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mips currently uses local_irq_save and local_irq_restore
which are not defined. Drop them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Currently, the timeout when waiting for packages is smaller than the
timeout communicated to the TFTP server for retransmitting. Make sure we
wait at least for two retransmissions before giving up.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since 99e72c8bbd on an i.MX51 based board,
I get : "phy0: Link is up - 1000/Full". It seems miidev tries to probe
the PHY to early and gets 0x3ffff which leads to the wrong capabilities
setting.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As we may try to get it from the env.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The end boundary of each registers set may overlap with the start
of the next register set. Subtract 1 to the end boundary.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For some reason, the mxs-boards missed some length parameters when adding
devices. This made reading from ocotp crash in the current version.
Provide missing lengths, use a consistent format and fix the length for
the LCDIF.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix casting on min argument, to avoid warnings on 64bit build.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If pdata is NULL smc911x_probe will crash. Checking the zero initialized
priv->shift results in default configuration if pdata is not set.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As uncompress_size is a static and will set if call uncompress_size multiple
time.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the check need to be inverted
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For the size_t type the format specifier %zu or %zx must be used.
See Documentation/printk-formats.txt in the kernel for details.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
in commit 2bdc9f57a8 the iomux was synced
with the kernel but this leads to some changes in the PAD_CTRL of some
FEC pins leading to a non working FEC on our cpuimx51 board.
This patch set back the PAD_CTRL of the missing pins to the initial
value.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we are smaller than the 256KiB reserved for barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we are smaller than the 256KiB reserved for barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The stmpe mfds can be connected via i2c and spi. This driver provides the basic
infrastructure for the i2c kind. It can be added as a normal i2c-device in the
board code. To enable functions a platform_data struct has to be provided, that
describes what parts of the chip are to be used.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce a struct envfs_inode_end with more data.
Today this will just containt the file mode to be able to add the symlink
support.
But this is compatible with the previous envfs version as they will do not
care about the extra as the previous version is just reading the filename and
then consume the extra data without using them.
Increase the envfs version to 1.0
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
they are store in the super block at byte 16th and 17th.
set the verison at 0.1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Sascha Hauer
Steffen Trumtrar
Wolfram Sang
Eric Bénard
Jean-Christophe PLAGNIOL-VILLARD
Renaud Barbier
Alexander Aring
Jan Weitzel
Jan Luebbe