This commit adds basic mmu support, ie:
- DMA cache handling is not supported
- Remapping memory region also
The current mmu setting is:
- 4KB granularity
- 3 level lookup (skipping L0)
- 33 bits per VA
This is based on coreboot and u-boot mmu configuration.
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds arm64 specific codes, which are:
- exception support
- cache support
- rework Makefile to support arm64
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes: 65071bd arm: Clarify memory layout calculation
arm_mem_barebox_image() shall return the beginning of the barebox
image (and thus the end of the malloc region). For relocatable
images we can return a suitable location, but for non relocatable
images we do not have a choice: We must return TEXT_BASE. If TEXT_BASE
happens to be outside the memory region between membase and endmem
we can return the base of the ramoops area.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Markus Pargmann <mpa@pengutronix.de>
The last 64KiB of address space may be used for the vector table at
0xffff0000, so we cannot use it for barebox. The easiest way to archieve
this is to never use the last 64KiB of memory.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use constants instead of magic numbers for PL301 registers bits in
imx6_mmu_init()
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
RAMOOPS is a driver that uses a reserved static memory region to store
the data from the last panic or boot. This helps to debug crashes at the
next boot while preserving the boot messages.
To guarantee a memory area that is not altered by barebox or the kernel,
this area is located at the end of the RAM right after barebox and
before the STACK. This ensures that changing barebox sizes do not
interfere with RAMOOPS.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The memory calculations used are all hardcoded into three different
files, start-pbl.c, uncompress.c and start.c. To make this more readable
and reliable, this patch gathers these information in barebox-arm.h with
static inline functions for the calculation of the memory offsets.
This patch also adds proper handling of different barebox/board data
sizes. Currently only 1MB+Alignment of RAM is reserved for Barebox and
board data. This could be too small for bigger devicetrees and barebox.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
remap_range is for remapping regions with different cache attributes.
It is implemented for ARM and PowerPC only, the other architectures only
provide stubs.
Currently the new cache attributes are passed in an architecture specific
way and the attributes have to be retrieved by calls to
mmu_get_pte_cached_flags() and mmu_get_pte_uncached_flags().
Make this simpler by providing architecture independent flags which can
be directly passed to remap_range()
Also provide a MAP_ARCH_DEFAULT flag and a arch_can_remap() function.
The MAP_ARCH_DEFAULT defaults to whatever caching type the architecture
has as default. the arch_can_remap() function returns true if the
architecture can change the cache attributes, false otherwise. This
allows the memtest code to better find out what it has to do.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add semihosting API implementation and implement a filesystem driver
to access debugging host filesystem using it.
Tested on Freescale SabreSD board (i.MX6Q) using OpenOCD
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the current multi image build process the DTBs end up uncompressed
in the PBL. This can be annoying because the PBL is often very size
constrained.
This patch allows to put the DTBs in as lzo compressed binary into
the PBL. Since lzo offers quite good compression ratios for DTBs no
other compression algorithm has been implemented for now.
Boards which want to use the compressed DTBs only have to change
the __dtb_ prefix in the DTB name to __dtb_z_. Also they should select
ARM_USE_COMPRESSED_DTB to make sure barebox supports uncompressing
the DTB.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes build failures in builds without MMU support by providing
a fallback implementation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we no longer have custom gpio function prototypes we can
drop the prototypes from asm-generic/gpio.h can add them to
include/gpio.h instead. While at it add static inline dummy wrappers
for !CONFIG_GENERIC_GPIO so that code using gpios can compile without
gpio support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Multi machine barebox builds have to pass information on which
board we are running on via boarddata. Usually this will be a
pointer to a device tree. Some boards might not have a device
tree available though because they are either not ported over
to device tree yet, or are running in some limited first state
environment which does not offer enough space for a device
tree. For these cases this patch adds a mechanism to embed a
machine number into a struct type along with a magic number.
This makes it possible to check for a specific machine
later during regular runtime.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces the bitsperlong.h file for the remaining architectures.
It's purpose is to define BITS_PER_LONG which in the next step can be used
by a generic posix_types.h file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of letting all architectures define their own dma_addr_t use
a common place in include/linux/types.h and use a Kconfig symbol that
architectures can select to define the width of dma_addr_t. The same
is done in the Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Those should only be used internally. All users should rather
use the streaming DMA API, which does proper cache maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This better separates the DMA from the MMU functionality.
Also move all drivers that only depends on asm/mmu.h for the alloc
functions over to the common header.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
That's the place where Linux has them and other architectures would
implement this.
This will help in phasing out the direct usage of the ARM asm/mmu.h
header.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As a lot drivers currently rely on the 1:1 virt->phys mapping on ARM
we define DMA_ADDRESS_BROKEN to mark them. In order to use them on
other architectures with a different mapping they need proper fixing.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes it's useful to test if a memory operation works or
aborts. This adds data_abort_mask() to ignore data aborts and
data_abort_unmask() to enable them again. This is used in the
next step for the 'md' command so that illegal addresses just
show 'xxxxxxxx' instead of crashing the system.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So users can pass in device memory pointers without provoking
warnings.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ENTRY_FUNCTION() references __barebox_arm_head(),
so <asm/barebox-arm-head.h> should be included from barebox-arm.h
to avoid implicit declaration warning/error.
ENTRY_FUNCTION() uses __naked, so <linux/compiler.h> should also be
included.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Provide the necessary types and defines used in this header.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>