CROSS_COMPILE is not necessary in some cases:
- Sandbox
- Native build
(e.g. when you build barebox for ARM on the ARM Linux system)
- If CONFIG_CROSS_COMPILE is supported like Linux in the future,
CROSS_COMPILE might be set by Kbuild.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, MAKEALL always reports "Configure: OK" and "Compile: OK"
regardless of the result of the configuration and compile.
$ LANG=C CROSS_COMPILE=arm-linux-gnueabi- ./MAKEALL -a arm foo_defconfig
Building arm foo_defconfig
make[2]: *** [foo_defconfig] Error 1
make[1]: *** [foo_defconfig] Error 2
make: *** [foo_defconfig] Error 2
Configure: OK
***
*** Configuration file ".config" not found!
***
*** Please run some configurator (e.g. "make oldconfig" or
*** "make menuconfig" or "make xconfig").
***
make[3]: *** [silentoldconfig] Error 1
make[2]: *** [silentoldconfig] Error 2
make[1]: *** No rule to make target `include/config/auto.conf',
needed by `include/config/kernel.release'. Stop.
make[1]: *** Waiting for unfinished jobs....
make: *** [_all] Error 2
Compile: OK
arm-linux-gnueabi-size: 'makeall_builddir/barebox': No such file
Compiled in 2s
The check_pipe_status() function must be called right after "make"
command, not "printf" command. ("printf" probably succeeds all
the time.)
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the missing has_pmecc parameter for sama5d4 based boards.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The '-y' and '-o' options are independent,
so just add missing 'break'.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the 1-wire and LED d2 use the same pin (PE25) on the EK board.
So, make LED enable only when the 1-wire is disabled.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
In function `dsps_probe': undefined reference to `of_usb_get_dr_mode'
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So they aren't build when no console support is selected.
Fixes:
In function `console_get_by_dev': undefined reference to `console_list'
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Those cause a warning while generating the docs
as well as misrendering of the generated docs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix the following warning:
commands/help.c: In function ‘list_group’:
commands/help.c:57:4: warning: format not a string literal and
no format arguments [-Wformat-security]
printf(cmdtp->name);
^
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
return errno when possible
otherwise return 0 for ok or 1 for error
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The commit
commit 0d7a213345
Author: Antony Pavlov <antonynpavlov at gmail.com>
Date: Wed Sep 10 11:42:19 2014 +0400
MIPS: dts: use physical addresses (as Linux does)
With IOMEM() adapted for MIPS we can use physical addresses
in device tree reg property.
has switched MIPS dts files to physical addresses usage.
The patch was tested on qemu, but qemu malta board is tolerant
of using physical addresses for accesing to device
(Ingenic JZ4755 and JZ4780 processors are tolerant too!).
But other CPUs (e.g. Loongson LS1B) can throw an exception
in this situation.
Additional physical address to virtual address translation
on MIPS is needed.
We already have this in include/common.h
#if defined(CONFIG_MIPS)
#include <asm/addrspace.h>
#define IOMEM(addr) ((void __force __iomem *)CKSEG1ADDR(addr))
#else
#define IOMEM(addr) ((void __force __iomem *)(addr))
#endif
So use IOMEM() to fix dev_request_mem_region() return value.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit a1a9665113 (kbuild: do not create symbolic link
include/asm), the symbolic link include/asm is not created.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise, "make mrproper" misses to delete some generated files
such as include/generated/compile.h.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Looks like I am also highly addicted to Linux...
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Kbuild supports saving output files in a separate directory.
But the build directory must be created beforehand. For example,
$ mkdir -p dir/to/store/output/files
$ make O=dir/to/store/output/files defconfig
Creating a build directory automatically would be useful.
[ imported from Linux Kernel, commit 1c9e70a55b08 ]
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, MIPS is the only architecture that needs
include/generated/asm-offsets.h, but we have got ./Kbuild file now.
It is a good reason to move asm-offsets.h rule from arch/mips/Makefile
to ./Kbuild and add dummy asm-offsets.c for the other architectures.
asm-offsets.h would be useful for all the architectures.
This commit does not implement include/generated/bounds.h,
but if necessary, it is easy to implement it.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
broken since
commit ed6e965824
Author: Sascha Hauer <s.hauer@pengutronix.de>
resource: Let dev_request_mem_region return an error pointer
Introduce dev_request_mem_region_err_null
only used on platform like at91 where the resource address conflicts
with errno PTR.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The CPSW has two slaves. When one of them fails to setup continue
anyway with the other one. This fixes a crash in the beaglebone black
which only has one slave connected. The code doesn't find a phy on
the second slave and bails out, but the error path is broken: It frees
the private data structures which contains used resources.
Reported-by: Philippe Leduc <ledphilippe@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the SMC1111 has a shared pool of 2k memory buckets for both
transmission and reception, and as there are variants which have as few
as 4 buckets in total, the memory pool can be hogged by unclaimed
receptions, and impeed any further transmission.
This happens on the zylonite pxa board, where 4 packets, most probably
icmp and arp, fill the 4 buckets, preventing any further ethernet
transmission, and stalling the driver.
The fix is rather rough : whenever all the buckets are filled by
reception packets, and if a transmission is required, the transmission
code path will empty up all received packets.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
useful to use it for testing on qemu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The compatible "ti,omap4-i2c" don't help to get fclk_rate. So set it acording to
cpu compatible: "ti,am33xx" and "ti,omap4"
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since
commit 54bccadddd
Author: Raphaël Poggi <poggi.raph@gmail.com>
mtd: atmel_nand: retrieve ecc_mode from pdata
break most of the non atmel AT91 boards that did not provide a ecc_mode
params in the nand pdata
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Booting a beaglebone black from eMMC is broken since:
commit 0d6392de4a
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu Jun 5 12:09:07 2014 +0200
ARM: AM335x: Beaglebone: Use stripped down devicetree for MLO
The stripped down device tree does not have the eMMC device node which
the beaglebone black needs for booting. Add this node to the common dts
file, but keep it disabled. It gets enabled later with a call to
am33xx_of_register_bootdevice() when the system is booted from eMMC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix for a compiler complaint, because print_packet is needed by a
function before it is declared.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Netconsole doesn't have a baudrate. Loady supposes a console has one,
and tries to compute the console's baudrate variable value, regardless
of its existence.
This triggers a NULL pointer dereference on netconsole. If attempting
loady on a netconsole is a bit useless, barebox should not panic. Fix
this by checking the variable exists before reading its value.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The buffer descriptors are allocated from coherent memory, so there
is no cache maintenance needed. Only tell the compiler that the descriptors
can be modified by the hardware.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
