introduced in commit f76ad819e4
drivers/mtd: cosmetic changes
it's supposed to the invert of the writesize - 1
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this device controller is present on rm9200/9260/9g20/9261/9g10/9263
the 9g45 use an other IP
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
TLSF: Two Level Segregated Fit memory allocator implementation.
Written by Matthew Conte (matt@baisoku.org).
Public Domain, no restrictions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The flags in struct console_device have to be initialized
to zero. Otherwise the following can happen:
- console_register sets the initial baudrate of a new console
before we set the global console init state to CONSOLE_INIT_FULL.
- In console_baudrate_set we test whether the current console is
active which may be true because of unitialized flags.
- we then call getc() to wait for the user to accept the new settings
and we are stuck because of the CONSOLE_UNINITIALIZED state
we will never get anything from getc().
Looking back this explains some cases for me when barebox refused
to start and I really wonder why this did not become a more visible
problem before.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a device to read and write to MTD data and oob
(/dev/mtdraw<N>).
The device is constrained in a separate source file, so that
further improvement of commands (such as nandwrite) could
make it useless, and easy to remove.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Split /dev/mtd and /dev/mtdoob devices.
Remove from mtd structure the mtdoob character device.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If multiple MTD devices were registered, an exception
occured, as they all wanted id 0. Let the driver code choose
the device number dynamically.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change NAND_WRITE into MTD_WRITE.
Change "page_shift" references in the core, which are purely
NAND, into mtd->writesize which is MTD generic.
Rename all "info" (struct mtd_info) into "mtd".
Also provide a parameter to add_mtd_device() so that legacy
nand devices still appear as nand<N>.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix whitespace, replace all debug() by dev_dbg(), and fix
line length to 80 characters.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It makes no sense to check the filename pointer here, because a) we have
already been using it and b) argc has been tested against 1 already, so
argv[1] should not be NULL. So, drop the checks.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support the setup of the mmc voltage, when booting OMAP4 with twl6030
from nand.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a general twl device driver twlcore to call i2c send/write
functions.
Abstract twl4030 to call twlcore functions.
Fixed some code-styling issues pointed out by checkpatch.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added i2c support for omap4. Tested on pcm049.
Driver based on linux kernel implementation.
Also added a shift to access 16-bit registers
to make support for OMAP730/850 possible.
If accessing a non existing slave the bus will go into arbitration mode.
It's unable to recover from it.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add sorted insert in stringlist functions.
Also added function to checked if string is already
in string list.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a function to remap an IO range into a virtual addresses
range. This is particulary usefull for the few devices
mapped at physical address 0, as the MTD boot devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Increase pxa reading performance by reading 4 bytes at a
time instead of 4 reads of 1 byte.
As the mci controller FIFO accepts reads on bytes, halfwords
or words, use words whenether possible.
The boost is for a 250KBytes file read and display (bmp):
- before: 6900ms
- after: 6000ms
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The write data timeout is too small for old cards,
especially the Transcend 256MBytes SD card. Increase it from
10ms to 100ms.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As PXA cpus suffer from a silicon bug which prevents them
from being compound devices, forbid use_acm=1 for PXAs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The NAND_READ_OOB Kconfig option is used to
a) creating a cdev for reading OOB data
b) compiling in mtd->read_oob support
The former was intended and that's also what the Kconfig help
says. The latter though was implicit and wrong. mtd->read_oob
is also used by the bbt code which resulted in a NULL pointer
deref when compiled with BBT but without NAND_READ_OOB.
To fix this, split the option into two. The now invisible
option NAND_OOB_DEVICE is only responsible for b) and gets
selected when necessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The device resources are much smaller, the resource mechanism
revealed this because of overlapping devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The icache command is unused. Instead of adding it to compilation
again, remove it as the cpuinfo command provides the same information.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>