The nand command is for bad block handling which some do not need.
So make it optional, but with default y.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
fix this gcc 4.4 warning:
xyzModem.c: In function 'xyzModem_stream_open':
xyzModem.c:564: warning: 'dummy' is used uninitialized in this function
Copied from U-Boot
Signed-off-by: Fabio Porcedda <fabio.porcedda@telit.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The m68k support is compile broken for a long time now and nobody
cared so far. We cannot keep the architecture uptodate with current
development wihtout being able to compile it. It's still in the
archives and can be re-added anytime once somebody cares for.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Last time I used the gpio commands I was somehow confused about the behaviour
of the 'gpio_get_value' command. So, I decided to add some doc for it. Here's
the result.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The function names do not make it clear what return value
is expected and do not save a single line of code. Put
the code inline and unbreak the wrong checks introduced
with a3c1e5d888.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Eric Bénard <eric@eukrea.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
add -F options to compare to file crc
it's usefull to compare what you flash in a partition
it's selectable by CONFIG_CMD_CRC_CMP
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before we duplicate it between command/bootm.c and scripts/mkimage.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before we duplicate it between common/bootm.c and scripts/mkimage.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow you to create a box style entry
via C API by specifying the type as
struct menu_entry me = {
.display "test",
.type = MENU_ENTRY_BOX,
.box_state = 1,
.action = action_to_run,
}
and via shell
menu -e -a -m <menu> -c <command> [-R] [-b 0|1] -d <description>
menu -e -a -m <menu> -u submenu -d [-b 0|1] <description>
-b with 0 for not selected and 1 for selected
and -c for the command to run when changing state
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to automaticaly run an entry if the user do no choice
this is usefull for boot menu as example
with menu -s -m boot -A 3 -d "Auto Boot in"
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before if you specify id = 0 the next available id will be taken
otherwise fail if already registered now as in linux we use -1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Clients now only have to call menu_add_submenu or menu_add_command_entry
instead of allocating many strings.
This also fixes some problems in the menu code. The priv field in struct
menu_entry was a pointer to struct menu or a pointer to an allocated string.
It was never freed, only had to be freed when it was an allocated string.
The reference to a submenu is now kept as a string and not to the menu
itself. The code checked the existence of the submenu when creating it, but
crashed when the submenu was removed and referenced afterwards. Now the
code hapily allows references to nonexistant menus but complains during
runtime when the menu is not there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce a menu framework that allow us to create list menu to simplify
barebox and make it more user-frendly
This kind of menu is very usefull when you do not have a keyboard or a
serial console attached to your board to allow you to interract with
barebox
For the develloper part,
The framework introduce two API
1) C
that allow you to create menu, submenu, entry and complex menu action
2) Command
that allow you as the C API to create menu, submenu, entry and complex
menu action but this time the actions will be store in a function and
then be evaluated and excecuted at runtime.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this fix its possible to run loadb -f /dev/ram0
again with the latest next patchstack. Without you will
run into data_abort. Tested with omap3530 beagleboard.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Copy to target directory is supported since commit b36fca0c, circa 2007.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to eth_open/eth_halt the network devices during NetLoopInit
which is called whenever the user enters a network command.
Change this behaviour so that the current network device gets opened
when making it the current one.
With this change it's always possible to send packages and we are able
to implement a new network stack in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
theses commands allow low level access to i2c bus and can be useful
to setup an i2c device without having to add code, compile and flash
barebox.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also, do not allow to continue barebox after returning from the
application since we don't know anything about the state we are in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file has no useful things for others than the driver,
so move it next to the driver and remove the corresponding
include from other files.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We claim to be compatible with the kernel's cmdlinepart parser, so
support <size>@<offset> like the kernel does.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Other architectures are supporting the uImage format used by barebox's 'bootm'
command. x86 does'nt. So, we need a special command to be able to boot the
x86 specific bzImage format.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on suggestion from S. Hauer, fix the obvious typo in
commands/Makefile.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Nishanth Menon wrote:
> no signed off by and no diffstat?
Ups.
> can you use git-format-patch to send please? it is easier to review.
Sure. Here it comes:
jbe
------8<---------8<---------8<---------8<---------8<---------8<----
Subject: [PATCH] Some doxygen related fixes:
- fix a few doxygen comments that are used in a wrong way
- move some pages and their content to a better place in the
generated documentation
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
'close()' clobbers the 'errno' value from the erase command. So it must be done
*after* the check for ENOSYS to ingnore it correctly.
Signed-off by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to check for maximum argument counts. The commands are
safe to be called with more arguments, so lets safe some bytes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of having a big switch/case for every protocol, do
the right things in the individual functions before callong
NetLoop().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Return success on -ENOSYS. (un)protecting a device which
is not protectable should not irritate users.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for USB devices. It uses
the Linux Kernel gadget API. Along with this patch
comes driver support for the Freescale (arc) USB OTG
Core and USB Device Firmware Update (DFU)
The serial gadget support is not working at the moment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to write the data in nand_bb_write directly to the
NAND flash. If we do not write a whole NAND page at once, this
resulted in multiple writes of one page which corrupted the
ecc data.
Fix this by collecting 4096 bytes of data before actually
writing the data to the flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>