Without num_modes the imx fb driver won't work. Specify this
in the boards and also bail out in the driver when num_modes
is unspecified.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change dependencies in Kconfig for twl devices.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using SSP1 since this is the default configuration.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add nandtest command to test nand devices
and display ecc stats at the end of test.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this was introduced in "6b3e01a arm: eukrea: Fix compilation warning"
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- bwPollTimeout is set to 10 ms, from the DFU spec, this
is the minimum time, in milliseconds, that the host should
wait before sending a subsequent DFU_GETSTATUS request.
Without this, I get 25 seconds value and dfu-util waits twice 25s
during download
- when in IDLE and receiving DETACH, first return 0 to make
dfu-util happy, then use a dfudetach variable to exit dfu
(without an USB reset as per the comment on line 425) and
return to runtime mode.
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- this patch sync fsl_udc.c with linux's driver,
- add a poller on usb_gadget_poll to get serial gadget working,
- return -EIO in usb_gadget_poll when udc is stopped (do detect
cable disonnection)
- tested on i.MX25 & i.MX35
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to always call poller_call even durring timeout
and still the case in getc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
enable serial and dfu at the same time
senario if the usb device is plugged and the BP is not pressed at boot time
during 5s the usbserial will be enable
disable zlib support to fit in the 256K
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While we are here: do not follow the change of the file name, because there is
no GPIO dependency in this driver.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 88ce7ef769 has changed the API and commit
b29b8f43d5 has moved the S3C24xx NAND driver
file. With the move the API change in the S3C24xx NAND driver was lost.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 88ce7ef769 introduces an additional
parameter to the function add_mtd_device(). It seems one of the callers was
left.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The lowlevel init function was a 1:1 copy from the babbage
baord, so it should be safe to switch to the generic C
lowlevel init.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Eric Benard <eric@eukrea.com>
Reimplement the code from lowlevel.S in C. It is run
from SDRAM anyway, so we can safely do this initialization
in a regular barebox environment instead in Assembly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- move code which can be shared between i.MX53 and i.MX51
to a common file
- rename mx53_init_lowlevel to imx53_init_lowlevel
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To get rid of:
(MTD_OOB_DEVICE && MTD_RAW_DEVICE) selects NAND_READ_OOB which has unmet direct dependencies (MTD && NAND)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
a) use the more CPU specific S3C* macro names
b) move the register description out of the way, as more recent CPUs using a
different layout and more features
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Keep common code in the MACH instead of re-inventing it in each platform.
Also use S3C* macros for all memory related register.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The UART is one of the units which differs only slightly inside the S3C family.
Prepare this driver to share it with more recent CPUs.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
After separation and after all S3C macros are now present, change the driver
to be more generic for future additions.
The timer registers in the S3C24XX family are only 16 bit wide. But these
registers can be read and written in a 32 bit manner. This is important to share
code with more recent CPUs which comes with 32 bit registers.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most members of the S3Cxxxx family share similar timer units. But they are
not really register compatible. To reflect this, use a separate name space for
the S3C family.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch just move the clocksource functions out of the generic.c source file
to handle it on a per CPU base later on.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are major differences in the clock tree of the S3C24xx family and the
more recent CPUs of the S3C family. Keep the S3C24XX clock routines separate to
avoid an ifdef hell. But also use generic function names to be able to
share drivers among the S3C family.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This LCD driver is for the LCD controller in the S3C2410/S3C2440 CPUs only.
Change its name to reflect its usage and free the way to add LCD controller
drivers for more recent Samsung CPUs.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The aready existing NAND controller driver in Barebox is for the S3C24XX family
only. Change the name of the file to reflect this fact (and free the way to add
more recent Samsung NAND controllers)
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Start with renaming files to share them in the S3C CPU family,
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>