Sascha Hauer
f8307efb82
remove id fields from struct device_d
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-21 16:41:46 +02:00
Sascha Hauer
ae302919c6
Get rid of DEVICE_TYPE_CONSOLE usage
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-21 16:41:45 +02:00
Sascha Hauer
8a1d5e11bb
Get rid of DEVICE_TYPE_DRAM usage
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-21 16:41:45 +02:00
Sascha Hauer
6e921fcb3c
Get rid of DEVICE_TYPE_ETHER usage
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-21 16:41:45 +02:00
Sascha Hauer
871c8f4c28
pcm037 cdev cleanup
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-21 16:41:45 +02:00
Sascha Hauer
a2b7cd183b
introduce cdev
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-21 16:41:44 +02:00
Juergen Beisert
cd175ec7d2
Remove all ARM __raw_* functions. They are mixed all over
...
the place. This clean up all ARM architectures to use only one set
of io functions.
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 14:35:35 +02:00
Wolfram Sang
74cc7814eb
Add ASM to start from NAND
...
Also rewrite IOMUX to be a lot smaller, because of 2K limit.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2009-06-04 10:31:14 +02:00
Wolfram Sang
bc4492252e
Refactor imx-NAND-init
...
Put board specific stuff to board-specific files.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2009-06-04 10:31:14 +02:00
Wolfram Sang
c83325ff72
Fix off-by-1 errors on range borders
...
It will never hit us here, but it's still wrong...
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2009-06-04 10:31:14 +02:00
Wolfram Sang
5c928b97fb
Init IOMUX in any case
...
Move SDRAM-check after IOMUX init.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2009-06-04 10:31:14 +02:00
Sascha Hauer
555cd1099e
pcm037: add USB support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-07 10:56:26 +02:00
Sascha Hauer
f3524c8984
i.MX31:
...
Rework iomux support for i.MX31:
- rename gpio-imx31.c to iomux-v2.c
- add pin definitions from Kernel
- fixup pcm037 board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-06 11:21:28 +02:00
Sascha Hauer
b3f3ca075d
[MX31] Clock Controller module: redefine registers as offsets
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-30 12:20:10 +01:00
Sascha Hauer
9e00177172
[MX31] Use common PLL defines
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-30 12:08:43 +01:00
Sascha Hauer
c42306e026
PCM037: Adjust CS5 for SJA1000
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-19 15:03:41 +01:00
Sascha Hauer
32f9f72e9f
PCM037: Add support for different memory amounts
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-19 12:01:05 +01:00
Sascha Hauer
5a9c64d523
pcm037: Limit CFI size to 32MB
...
According to the Phytec website the PCM037 has a maximum of 32MB
flash
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-17 18:20:56 +01:00
Sascha Hauer
3889e42b9e
Default environments: Do not continue when tftp failed
...
When we fail to download the kernel image (for example when the
user pressed ctrl-c) do not try to boot the image
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-11-14 11:37:28 +01:00
Sascha Hauer
db85c9e2b0
[PCM037] Add NAND support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-11-10 18:03:35 +01:00
Sascha Hauer
7e168c9f91
[PCM037] Add a default environment derived from PCM038
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-11-10 18:02:15 +01:00
Sascha Hauer
5a86990d3a
pcm037: Fix ARM architecture and boot params
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02 09:23:45 +02:00
Sascha Hauer
d2b2dab075
Net: Remove all hardcoded MAC addresses from default environments
...
While very convenient during debugging having MAC addresses in default
environments is a very bad idea. Stop it!
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-08-20 11:58:19 +02:00
Sascha Hauer
64b73c2543
[pcm037] compile fixes, update defconfig
2008-07-03 10:28:46 +02:00
Sascha Hauer
596c845072
[memory layout]: streamline memory layout
...
Memory layout can now be specified via kconfig options. Two
possibilities exist: default layout means the layout is stack
/ malloc heap / U-Boot. The user can also specify fixed addresses
for each TEXT_BASE / stack / malloc heap.
2008-06-04 11:54:03 +02:00
Sascha Hauer
9c7d282579
[general] Move include/configs/* to board/*/config.h
2008-04-07 12:18:05 +02:00
Sascha Hauer
8d8f900366
[ARM] Remove CONFIG_ARCH_NUMBER from Kconfig system. Putting too many
...
values into kconfig which are not user configurable at all only
encourages people to put even more stuff in there. This is not
good because people tend to have board patches lying around and
these patches won't apply regularly if they all change the same
file (arch/arm/Kconfig)
Instead, introduce a function armlinux_set_architecture() which
everyone can call during board setup.
Similarly introduce armlinux_set_bootparams() for the boot
parameter pointer.
2008-02-26 15:38:37 +01:00
Juergen Beisert
a7d96488e5
Using correct board names all over the place
...
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
2007-11-08 18:23:44 +01:00