The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mostly to make it clear that boarddata needs to be
something we can dereference.
As this is a pretty invasive change, use the opportunity
to make the signature 64bit safe.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the place for the atags now is determined automatically the call
from the boards can be removed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The convenience wrapper also contains the bch resources to
get rid of the hardcoded base in the driver in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards have board specific special clock setups. These are now
done in the SoC specific clock drivers.
It is assumed that most board specific clock setup is done based on
copy/paste from U-Boot. The generalized clock setup differs from
some boards:
- ioclk are adjusted to 480MHz
- ssp clocks are adjusted to 96MHz
- enet out clock is enabled
Some boards adjusted the ioclk to 320MHz and the ssp clock to 160MHz.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use MMC_CAP_ names instead of MMC_MODE_. This makes it more
clear that these are capabilities of host/card and do not refer
to the current mode. These are in line with the Linux Kernel
except for MMC_CAP_MMC_HIGHSPEED_52MHZ which could be fixed
later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
reset is confusing with the cpu reset and impossible to grep
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pinmuxing was wrong and no GPMI device was created.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the device id mechanism to the i.MX fec driver and
uses it to determine the fec version. Also adds devicetree
probing support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For some reason, the mxs-boards missed some length parameters when adding
devices. This made reading from ocotp crash in the current version.
Provide missing lengths, use a consistent format and fix the length for
the LCDIF.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So we can use it for dhcp request too.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that we have a bootm command which boots everything we can
simplify the defaultenvironment. We can call bootm on every
image type and can remove the kernelimage_type variables.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The new MMU setup will need SDRAM base addresses and sizes.
For this reason convert the MMU enabled ARM boards:
- move mem setup to mem_initcall. This is early but
still makes sure that we already have the console available
- move MMU setup in this initcall temporary as after the mmu_init will generic
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
we keep struct memory_platform_data for now on we will switch off the memories
resources to struct resource
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
before we can only support tftp
so keep it as default
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Often enough the exception vectors are not on TEXT_BASE (for example
on i.MX SoCs in internal boot mode), so the board specific code did
not map the exception vectors to 0x0 but whatever happens to be on
TEXT_BASE. Also, the current section-only mapping requires the
exception vectors to be on a 1MB boundary.
Instead, create the possibility to create second level tables and
use this to map a copy of the exception vectors in a board
independent way.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To prevent turning on the display before the signals are stable.
Also, put the LCD_CS pin in the same mode as the kernel does to
prevent flickering.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file is to be used in conjunction with the TX28 CPU module.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Lucas Stach
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Wolfram Sang
Juergen Beisert