Change getopt optstring parameter type to const char *.
Also change type to const char * of tmp variable which
pointed to optstring. This will only handle readonly.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch add getopt to the command list if it enabled via
Kconfig. With this patch we get a 'command not found' error.
Otherwise getopt doing nothing.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Due to a hw bug do not enable teh Asym_Pause.
Otherwise if you ser the bit 11 in 4h you will have to unplug
and replug the cable to make the phy work.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
based on the kernel code
detect it via IP version
In the GEM we can use a full packet buffer for receive but the buffer size
need to be 64bit size aligned.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the mininal tx ring size is 2 as if one we wrap on the same descriptor
and can cause IP lock on GEM (gigabit version) this is always the case
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as eth_device init is planning for remove and we need the init before register
the mdio bus
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
reset is confusing with the cpu reset and impossible to grep
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to pass more paraemeter to at91sam926x_lowlevel_init
and drop AT91_BASE_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will make the code more readble
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Here's the error message:
LD arch/mips/pbl/zbarebox
pbl/built-in-pbl.o: In function `decompress_unlzo':
/home/antony/barebox.git.rebased.isp/pbl/decomp.c:35: undefined reference to `free'
pbl/built-in-pbl.o: In function `pbl_barebox_uncompress':
(.text.pbl_barebox_uncompress+0x6d0): relocation truncated to fit: R_MIPS_26 against `free'
pbl/built-in-pbl.o: In function `pbl_barebox_uncompress':
(.text.pbl_barebox_uncompress+0x6e0): undefined reference to `free'
pbl/built-in-pbl.o: In function `pbl_barebox_uncompress':
(.text.pbl_barebox_uncompress+0x6e0): relocation truncated to fit: R_MIPS_26 against `free'
make[1]: *** [arch/mips/pbl/zbarebox] Error 1
make: *** [zbarebox.bin] Error 2
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
HAVE_CONFIGURABLE_MEMORY_LAYOUT was first meant as a feature, now it's a
feature to remove it. barebox on ARM now completely uses the memory passed
in from the lowlevel code and configures the malloc area and stack space
during runtime making it obsolete to hardcode these values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Defining STACK_BASE and MALLOC_BASE only makes sense when
either CONFIG_MEMORY_LAYOUT_DEFAULT or CONFIG_MEMORY_LAYOUT_FIXED
is set, so use separate #ifdefs instead ot #if/#else
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This optionally enabled the MMU in the PBL or during early startup for
the non PBL case. The regular MMU init code will pickup the already enabled
MMU later. This might complicate debugging early code, so this has been
made optional.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move early mmu code to a separate file so that it can be
used from the pbl and the regular image. Disabling the mmu
can be dropped since the regular mmu code is now able to
pickup an enabled mmu.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the at91sam926x, 9g10 and 9g20 over to barebox_arm_entry.
For these SoCs we currently support reading back the memory size from
the SDRAM controller, so all of these can have a common reset() function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This architecture is a bit strange. It has up to four SDRAM banks, but
all have a quite limited size. The SDRAM size for the different boards
currently is unknown as it's configurable with Kconfig. We use a SDRAM
size based on the value of the only board we have in the defconfigs:
edb9301. This likely breaks other ep93xx boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>