The bootargs are now autogenerated by barebox and the hostname should
not be preconfigured.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 0d6392de4a introduced a stripped
down device tree used for both white and black Beaglebone variants
that included the 256 MiB memory node from am335x-bone-common.dtsi.
This leads to the following error in the MLO:
mmu: Critical Error: Can't request SDRAM region for ttb at 9fff4000
This patch removes the (for the Beaglebone black) invalid memory size
from the common device tree and instead registers the memory bank
manually in the board file.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The beaglebone white and black have different devicetrees. Both
get linked into the MLO which makes it too big. Use a devicetree
generated from am335x-bone-common.dtsi which both board variants
can share. This reduces the binary size by about 30k.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It wasn't hard to find the right spot to copy the image
to before, but this makes it a bit more explicit.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The MB 77.07 is a small (80x80 mm) single-board computer
developed in Russia by the RC Module.
It was developed as an educational board for К1879ХБ1Я SoC
capabilities demonstration.
See http://www.module.ru/en/catalog/micro/micro_pc/ for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This makes sure the PMIC is initialized once it's available. Move the
initcall to coredevice_initcall to make sure we initialize the PMIC
before the FEC driver is initialized. The ethernet phy needs vgen3
enabled in the PMIC initialization.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Six images for the the 256MB and 512MB version with
different boot sources (MMC, NAND [different chips on
pre-/production modules]).
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From https://github.com/NVIDIA/cbootimage-configs.git
There are a bunch of different versions and boot options
for this board. Import BCTs for all of them.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To make am33xx_uart0_soft_reset more flexible rename it to
am33xx_uart_soft_reset and pass the UART base to it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hostname_init() must be called after the devicetree root node has been
initialized, otherwise the check on board compatible always returns
false.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX barebox update handlers take an optional dcd table as argument.
This can be used to add the correct dcd data to the image before flashing
it.
This mechanism is quite complicated and largely unused, so remove it. With
this it is only possible to flash the exact image passed to barebox_update,
which is what is mostly done anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This isn't much different from the default 1,16V
and I haven't seen this make a difference on any
board, but it seems to be required for some T30 SKUs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This board wasn't changed properly, as it was merged in the short
timeframe where the signature change waited to be applied. Change
it now to get rid of the compiler warning.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Not needed anymore, as barebox now accepts FDTs outside
of it's visible DRAM, as long as it's a valid pointer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Not needed anymore, as barebox now accepts FDTs outside
of it's visible DRAM, as long as it's a valid pointer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Not needed anymore, as barebox now accepts FDTs outside
of it's visible DRAM, as long as it's a valid pointer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mostly to make it clear that boarddata needs to be
something we can dereference.
As this is a pretty invasive change, use the opportunity
to make the signature 64bit safe.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jan Luebbe
Philipp Zabel
Antony Pavlov
Lucas Stach
Lucas Stach
Bo Shen
Michael Olbrich
Wadim Egorov
Holger Schurig
Beniamino Galvani