This argument is common in configuration and compilation.
Move it to ${MAKE}.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not change the working directory in this script.
"-C ${here}" is not necessary.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mixture of single quotes and back quotes in the same line makes
scripts unreadable.
Here, do_build_target() is especially unreadable. Using $(...)
instead of `...` would make it a little better.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CROSS_COMPILE is not necessary in some cases:
- Sandbox
- Native build
(e.g. when you build barebox for ARM on the ARM Linux system)
- If CONFIG_CROSS_COMPILE is supported like Linux in the future,
CROSS_COMPILE might be set by Kbuild.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, MAKEALL always reports "Configure: OK" and "Compile: OK"
regardless of the result of the configuration and compile.
$ LANG=C CROSS_COMPILE=arm-linux-gnueabi- ./MAKEALL -a arm foo_defconfig
Building arm foo_defconfig
make[2]: *** [foo_defconfig] Error 1
make[1]: *** [foo_defconfig] Error 2
make: *** [foo_defconfig] Error 2
Configure: OK
***
*** Configuration file ".config" not found!
***
*** Please run some configurator (e.g. "make oldconfig" or
*** "make menuconfig" or "make xconfig").
***
make[3]: *** [silentoldconfig] Error 1
make[2]: *** [silentoldconfig] Error 2
make[1]: *** No rule to make target `include/config/auto.conf',
needed by `include/config/kernel.release'. Stop.
make[1]: *** Waiting for unfinished jobs....
make: *** [_all] Error 2
Compile: OK
arm-linux-gnueabi-size: 'makeall_builddir/barebox': No such file
Compiled in 2s
The check_pipe_status() function must be called right after "make"
command, not "printf" command. ("printf" probably succeeds all
the time.)
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit e7554c0cb2 (kbuild: create a build directory
automatically for out-of-tree build), MAKEALL does not have to
create a build directory. It it done by the top Makefile.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, do_build_all() does nothing.
Since commit 195310fd7b (MAKEALL: add regex support), do_build()
takes two arguments. To fix do_build_all(), it must pass "*" as the
second argument of do_build().
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to compile only a subset of defconfig
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
it's allow you to compile specific defconfig or ARCH or all
as
CROSS_COMPILE=arm-linux- ARCH=arm ./MAKEALL at91sam9263ek_defconfig
CROSS_COMPILE=arm-linux- ARCH=arm ./MAKEALL
The cross-compiler can be specify via
CROSS_COMPILE default
CROSS_COMPILE_<arch> arch default
CROSS_COMPILE_<target> deconfig specifc
it will be evaluated in the invert order
or via config
you can specify it via env CONFIG or option -c (overwrite env)
CONFIG=./MAKEALL.cfg ARCH=arm ./MAKEALL at91sam9263ek_defconfig
CONFIG=./MAKEALL.cfg ARCH=arm ./MAKEALL
and for all
CONFIG=./MAKEALL.cfg ./MAKEALL
you can specify via env or option
env option
ARCH -a arch
CONFIG -c config
JOBS -j jobs
BUILDDIR -O build dir
LOGDIR -l log dir
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
quite similar and share the same board directory "prodrive/p3mx"
and the same config file "p3mx.h".
Signed-off-by: Stefan Roese <sr@denx.de>
PREREQUISITE PATCHES:
* This patch can only be applied after the following patches have been applied:
1) DNX#2006090742000024 "Add support for multiple I2C buses"
2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
CHANGELOG:
* Add support for the Freescale MPC8349E-mITX reference design platform.
The second TSEC (Vitesse 7385 switch) is not supported at this time.
Signed-off-by: Timur Tabi <timur@freescale.com>
Patch by Haavard Skinnemoen, 06 Sep 2006
This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
daughterboard.
ATSTK1000 is a full-featured development board for AT32AP CPUs. It
has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
CompactFlash cards. For more information, please see this page:
http://www.atmel.com/dyn/products/tools.asp?family_id=682
The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
AT32AP7000 chip.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- Add support for PPC440EPx & PPC440GRx
- Add support for PPC440EP(x)/GR(x) NAND controller
in cpu/ppc4xx directory
- Add NAND boot functionality for Sequoia board,
please see doc/README.nand-boot-ppc440 for details
- This Sequoia NAND image doesn't support environment
in NAND for now. This will be added in a short while.
Patch by Stefan Roese, 07 Sep 2006
Modifications are based on the linux kernel approach and
support two use cases:
1) Add O= to the make command line
'make O=/tmp/build all'
2) Set environement variable BUILD_DIR to point to the desired location
'export BUILD_DIR=/tmp/build'
'make'
The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'
Command line 'O=' setting overrides BUILD_DIR environent variable.
When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
- make highboot configurations use environment at high end, too,
to avoid flash fragmentation
- always use redundand environment
- don't enable video code for modules without graphics controller
- provide useful (though different) mtdparts settings
- get rid of CONFIG_CS_AUTOCONF which was always set anyway
* Extend mkconfig tool to print more useful target name
- Support for TQM5200S (short version without graphic controller)
- Support for modules with 'N' type S29GL128N Spansion flashes
(requires changes to flash layout)
- Support for MPC5200B cpu (mostly support for second SDRAM bank)