Support for default/once entries was lost earlier. This fixes this
and also looks for default/once entries in the loader directory instead
of the loader parent directory. This keeps the bootloader spec files
together under a common loader directory.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This helps with finding out why the state cannot be loaded correctly.
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The length of the data must fit into the remaining available space until the
next copy of the data.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use a consistent naming scheme: backend_raw_save_one() is called from
backend_raw_save().
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch factors out the state_backend_raw_file_get_size() into a separate
function and adds some ifdefs to make this code work under Linux aswell.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes it easier to share the code with linux, on Linux the ease and
write size have to be aligned. Use stride (which is already aligned to erase
block size) during erase, align size_full to writesize and use it while
writing.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch renames the member "step" of the struct state_backend_raw to
"stride" and tries to clarifies its meaning.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Although there is the define RAW_BACKEND_COPIES, the state_backend_raw_save()
function silently assumes exactly two copies. This patch removes that assumtion
by looping over all copies, but saving the one we're read from at the end.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes it possible to share the code with linux.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes the following warning:
CC arch/arm/boards/foo/board.o
In file included from arch/arm/boards/foo/board.c:22:0:
include/habv4.h:24:19: warning: function declaration isn't a prototype [-Wstrict-prototypes]
static inline int habv4_get_status()
^
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch registers a DT fixup, that copies the state nodes from the active
to the kernel DT. The backend reference will be a phandles.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function is needed when a device that already registered a fixup in
the probe routine fails later to probe completely. Without unregistering
the fixup the function might later be called with invalid data.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch improves the backend property, it can be either a phandle or a
of_path. During probe() of the state driver the backend property is
dereferenced and the resulting of_path is saved in the state context. In a
later patch it will be used to generate a phandle reference to the backend
during DT fixup.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds the functionality to export the description of the state, but
not the contents of the variables to a DT node. This will be used in a later
patch to "copy" the state description to the kernel device tree during DT
fixup.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Correct the pinmux configuration for the chip-select GPIOs. This fixes
detection of the first SPI NOR-flash after barebox itself got loaded from
there.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When probing from devicetree, the output for several i2c host
controllers prints out a bus number of -1:
i2c-omap 44e0b000.i2c: bus -1 rev0.11 at 400 kHz
i2c-omap 4802a000.i2c: bus -1 rev0.11 at 400 kHz
i2c-omap 4819c000.i2c: bus -1 rev0.11 at 400 kHz
The call to i2c_add_numbered_adapter() in probe finds out the next free
bus number, so we move the output to a location where the number is
already determined.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Returning other values causes problems for client code which wants to
perform calculations with the returned value.
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the missing pieces for:
d8a6e1c ARM/mem: handle data aborts gracefully for md
When possible use memmap and directly and dereference the input pointer
directly in memory_display() so that the data abort occurs where we expect
it and not in the md command. With this d8a6e1c can work as expected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 461f8cfc7e renamed the SCRM compatible
string in am33xx.dtsi and breaks all am335x based boards.
Rename the SCRM compatible string.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The variable name misses a CONFIG_ prefix to work as expected.
Fixes: 05a1e4b ARM: i.MX5: Do not register fixed clocks twice
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes: 80264a8 driver: Call bus->remove instead of driver->remove
On mvebu it happens that:
Upon device shutdown, when iterating through the active device list,
the phy0 device is removed before mdio-mvebu. Then, when the mdio bus
device is removed, the phy0 device is removed again, here:
mdio_bus_remove(on mdio-mvebu)
mvebu_mdio_remove
mdiobus_unregister
unregister_device
mdio_bus_remove(on phy0)
Fix this by setting the mdio busses phy_map[phy->addr] to NULL when
unregistering the phy device, so that mdiobus_unregister no longer
finds a valid phy_device when iterating over the busses device list.
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Sascha Hauer
Marc Kleine-Budde
Uwe Kleine-König
Jan Luebbe
Lucas Stach
Robert Schwebel
Wadim Egorov
Antony Pavlov