In order to support video graphics output on i.MX23/i.MX28 based platforms,
a calculation routine for the pixel clock is required.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch add the possibility to change the video mode at barebox's runtime
if the graphics driver in use supports it.
Signed-off-by: <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To setup the default 'enable' setting the "dev_set_param(dev, "enable", "0");"
does not work as expected. After the call the parameter is still "<NULL>".
This is due to any change of the setting is rejected, if the same setting
is already active.
This patch also let the default setting be successfull, but only calls the
graphics backend if a change happens.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With the change to Hz as the main clock unit on the STM architecture the
Chumby must also use this unit.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox does not have interrupt functionality. Nevertheless it's
sometimes useful to periodically call functions, like for example
a heartbeat LED or watchdog reset. Instead of cluttering the code
with calls to these functions this patch adds a generic polling
infrastructure. Code which might run for longer now can call
poller_call() periodically which in turn will call all registered
pollers.
This patch adds a call to poller_call in two generic pathes. First
of them is getc() which covers waiting for uart input. Second is
ctrlc() which should be called anyway from code which might run
for longer. So instead adding poller_call directly to your code,
consider checking ctrlc instead which also gives additional
convenience to the user.
The poller code is safe against reentrancy which means that it's
safe to call poller_call inside a poller.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When retrieving the MAC address from EEPROM, we must notify the networking core
at eth registration time. Otherwise we get the 'No MAC address set' warning on
the first network access, and the MAC address is set to a random value instead
of the real one.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file is to be used in conjunction with the TX28 CPU module.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX28 comes with an extended ethernet controller (ENET/FEC) which
is backwards compatible to the FEC known from other i.MX CPUs. Add a few
adaptions to the existing driver to make it work with the MX28 FEC.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some register bits are not defined in the IMX CPUs using this FEC (at least
I did not find anything about them in the related datasheets) and they will
get (partially) a new meaning in the i.MX28 CPU. So, removing them from the
source seems the best way to avoid any accidental usage on i.MX28.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX28 shares a lot of functionality with its predecessor, the
i.MX23 (formerly known as stm378x). This patch adds some files to support
both CPUs.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least the FEC and the CAN controller drivers can also be used by the i.MX28.
When still used by IMX, the i.MX28 (and maybe i.MX23) related code must be
ignored.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Separate i.MX23 clock handling to simplify the addition of the upcoming i.MX28.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is for easier integration of the i.MX28 architecture (to share the code
later on).
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the platform should configure pins to be used by the driver.
The driver must work independently from the settings.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX23 currently uses kHz as the unit for its clock handling and calculation
to avoid overflows when calculation with the internal 480 MHz PLL and its
fractional divider. This patch changes all routines to accept Hz and deliver
Hz as the clock unit.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ARCH and CROSS_COMPILE entries were introduced in commit cdfd8bdd, probably
by mistake.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commands/loadb.c doesn't build with CONFIG_CONSOLE_SIMPLE, because it uses
fprintf / for_each_console (which uses console_list).
Fix it by adding trivial implementations of both in console_simple.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
tested with qemu only
qemu-system-arm -M versatilepb -monitor null -kernel barebox -net nic -net user -tftp "<uImage-path>/" -serial stdio
add -nographic if you do not want the lcd via sdl
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
update:
- use default env
- move arm_timer.h as in the kernel
- add nor flash support
- udpate defconfig
- fix copyright copy from linux
- fix ARCH_TEXT_BASE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Simplifies specifying gpio numbers from bank/number info.
From linux kernel.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MINI240 board has available always 64M of memory so add
size to memory device structure.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Run fixups based on the JEDEC manufacturer ID independent of the
command set ID.
This changes current behaviour: Previously, geometry reversal for AMD
chips were done based on the command set ID, while they are now done
based on the JEDEC manufacturer and device ID.
Also add fixup for top-boot Atmel chips.
based on U-Boot
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Move fixing up like geometry reversal into separate functions.
The geometry reversal fixup is now performed
by altering the qry structure directly, which makes the sector init
code slightly cleaner.
based on U-Boot
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Krzysztof Halasa
Juergen Beisert
Sascha Hauer
Marc Kleine-Budde
Baruch Siach
Peter Korsgaard
Alexey Zaytsev
Marc Reilly
Marek Belisko
Jean-Christophe PLAGNIOL-VILLARD