The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As stated in section 29.19.32 of SAMA5D3 Series datasheet, to move
from CS(n) to CS(n+1) the stride is 0x14 and not 0x10 as in the
other AT91 CPUs
Signed-off-by: Matteo Fortini <matteo.fortini@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this places the command into the "Information commands"
section of Kconfig
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this places the command into the "Information commands"
section of Kconfig
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this places the command into the "Boot commands"
section of Kconfig
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mostly to make it clear that boarddata needs to be
something we can dereference.
As this is a pretty invasive change, use the opportunity
to make the signature 64bit safe.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise SAM A5d35 would be detected as A5d36.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
SAMA5D36 SoC is a sub type of SAMA5D3 which has two Ethernets
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
asm/hardware.h does not have any content except including mach/hardware.h.
include mach/hardware.h directly where needed and get rid of asm/hardware.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some of the irq can still be on after a reset or power on as the IP are
powered by the backup power. This could lead to an interrupt dead lock
when the kernel boot. So disable them before booting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can specify the devname in the board
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to drop the config.h and switch to multi board support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The macb/gem core is used by the Zynq SoC. In preparation of sharing
the macb driver between at91 and Zynq, rename the platform data to
'struct macb_platform_data', and move the definition to a common
location.
Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
reset is confusing with the cpu reset and impossible to grep
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to pass more paraemeter to at91sam926x_lowlevel_init
and drop AT91_BASE_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will make the code more readble
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the at91sam926x, 9g10 and 9g20 over to barebox_arm_entry.
For these SoCs we currently support reading back the memory size from
the SDRAM controller, so all of these can have a common reset() function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
it's currently working by luck
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>