The arch/arm/include/asm/gpio.h header file contains
#ifndef CONFIG_GPIOLIB
#include <mach/gpio.h>
#else
#include <asm-generic/gpio.h>
#endif
We use CONFIG_GPIOLIB=y for the only mach-versatile
Versatile/PB board so there is no need of <mach/gpio.h>.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 0d6392de4a introduced a stripped
down device tree used for both white and black Beaglebone variants
that included the 256 MiB memory node from am335x-bone-common.dtsi.
This leads to the following error in the MLO:
mmu: Critical Error: Can't request SDRAM region for ttb at 9fff4000
This patch removes the (for the Beaglebone black) invalid memory size
from the common device tree and instead registers the memory bank
manually in the board file.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add intermediate .S files to .SECONDARY. Otherwise make deletes them
and regenerates them each build.
Also remove KBUILD_DTBS since the make system descends in dts/ anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
bmcr2 contains the gigabit advertise bits and lpa2 contains the gigabit
link partner ability bits, not the other way round.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
media_list tests for gigabit phys like this:
if (mask & BMCR_SPEED1000)
mask does not contain the value of the BMCR register though, so the
test is completely bogus. Test for mask2 instead which is only
nonzero when the phy has gigabit capabilities.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
media_list writes into a static string. Worst case length of this string
is 125 bytes, but the function only allocates 100 bytes. Use 256 bytes which
is long enough for some extensions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current code counts the eraseregions a new partition spans and
sets the partitions number of eraseregions accordingly, but the code
forgets to allocate and fill in the eraseregions for the partition
mtd device. This makes the erase operation crash with a NULL pointer
exception.
This patch fixes this with the same approach the kernel uses: Set
the number of eraseregions to 1 unconditionally and the eraseregion
size to the maximum of the eraseregions found in the partition.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Set mtd erasize using max erasesize from erase regions
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The beaglebone white and black have different devicetrees. Both
get linked into the MLO which makes it too big. Use a devicetree
generated from am335x-bone-common.dtsi which both board variants
can share. This reduces the binary size by about 30k.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Image renderer may not be particularly useful without framebuffer
support, but technically it does not depend on VIDEO. Fixes:
warning: (CMD_SPLASH) selects IMAGE_RENDERER which has unmet direct dependencies (VIDEO)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/ppc/boards/freescale-p1022ds/ddr.c: In function 'fsl_ddr_board_info':
arch/ppc/boards/freescale-p1022ds/ddr.c:39:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/mips/configs/dlink-dir-320_defconfig:52:warning: override: reassigning to symbol CMD_DHCP
arch/mips/configs/dlink-dir-320_defconfig:54:warning: override: reassigning to symbol CMD_PING
arch/mips/configs/dlink-dir-320_defconfig:55:warning: override: reassigning to symbol CMD_TFTP
arch/mips/configs/dlink-dir-320_defconfig:64:warning: override: reassigning to symbol FS_TFTP
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/arm/configs/friendlyarm_mini2440_defconfig:38:warning: override: reassigning to symbol CMD_TFTP
arch/arm/configs/friendlyarm_mini2440_defconfig:46:warning: override: reassigning to symbol FS_TFTP
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mainly for Jetson TK1 support, but -next moved
some stuff around. Also enable some filesystems.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to build persistent images for the Tegra124
line of SoCs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The controller is similar enough to the ones found
on earlier generation SoCs to not need any additional
changes.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the real value is 2^p a input value of 0 is
actually valid.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tegra124 extended the mux by 1bit to allow for
more PLL sources.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can reuse the Tegra30 pinctrl driver, as the bit
layout is the same. Just add the pin and drivegroups
and some compile-time magic to avoid bloat.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Antony Pavlov
Philipp Zabel
Herve Codina
Alexander Shiyan
Lucas Stach