In commit ad09b59f8b "ARM i.MX31: give
register base addresses a proper MX31_ prefix", the IOMUX GPR setup
to enable USBH2 was replaced with an incorrect source register.
Instead of reading the GPR register, USBOTG HWHOST is used as rmw source,
which contains 0x10020001.
Beside the intended GPR[11] setup ("Enable USBH2 signals on AudioPort 3 and
AudioPort6"), this erroneously also sets
GPR[28] enable USBOTG loopback
GPR[17] override DSR_DCE1 with USBOTG_DATA4
GPR[0] select FIR DMA requests instead of UART2 DMA
Beside breaking UART2, it probably also broke some UART1 and USB OTG setups.
Fix this and replace the address with the appropriate defines.
Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The prefix/cleanup series
ad09b59f8ba8c63596674c53af062b
missed a few unprefixed IOMUXC_BASE define users. Fix these.
Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The checkpatch.pl script is also used to validate user-space code in
the scripts/ directory, so it should allow printf() lines to be longer
than 80 columns.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
U-Boot doesn't honor the load address specified in an initrd. Barebox
shouldn't be more strict here. This unbreaks booting an uInitrd
generated by Debian's flash-kernel that uses 0 as entry address where
there is nothing on the i.MX53 that was used.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
data.initrd_address = UIMAGE_SOME_ADDRESS;
...
if (-L was given to bootm)
data.initrd_address = address_provided_to_-L;
...
if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_SOME_ADDRESS)
data.initrd_address = load_address_from_uInitrd;
...
if (data.initrd_address == UIMAGE_SOME_ADDRESS)
data.initrd_address = UIMAGE_INVALID_ADDRESS;
can be simplified to:
data.initrd_address = UIMAGE_INVALID_ADDRESS;
...
if (-L was given to bootm)
data.initrd_address = address_provided_to_-L;
...
if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_INVALID_ADDRESS)
data.initrd_address = load_address_from_uInitrd;
...
The only change introduced by this simplification is for cases where the
user passes -L UIMAGE_SOME_ADDRESS or -L UIMAGE_INVALID_ADDRESS to
bootm. (-L UIMAGE_SOME_ADDRESS is now used literally instead of ignored
before. -L UIMAGE_INVALID_ADDRESS used to skip getting the
initrd-address from the uInitrd, now the uInitrd address is honored.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fix incorrect Kconfig symbols for MACH_FREESCALE_MX51_PDK,
MACH_FREESCALE_MX53_LOCO and MACH_FREESCALE_MX53_SMD.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox do not have support for MACH_NXDKN, MACH_NXHMIBB,
MACH_NXEB500HMI and MACH_NXHX boards, so remove these symbols.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OMAP_CLOCK_ALL is missing in Kconfig, so remove the "select" statement
and all other references to this symbol.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DISK_DRIVE is missing in Kconfig, so remove the "select" statement.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The detection of the partition table fails when we have a barebox image
in the MBR. So check only for partition table types.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We PAGE_ALIGN the size in dma_alloc_coherent so do it also when free the memory.
Use PAGE_SIZE instead of magic numbers.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
EIO is a better error message to describe the data transfer to or from the SD cards has failed.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The host limits are only one limit we must honor when changing the transmission frequency.
The SD cards have their own limits, so take them also into account.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
According to the SD card spec the detection can happen at 400 kHz
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since a generic block reset function is a available, also the MCI driver
should make use of it.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MMC_BUS_WIDTH_* macros do not correspond with the real bus width.
After setting a bus width larger than 1 bit the next call to change the
frequency ends in the default handler and the host interface stays silently
at the previous frequency.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove some leftover from former powerpc support which has no
relevance for i.MX based esdhc controllers.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least in standard oxford english one not is enough.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux expects linux,initrd-end to contain the first unused address. As
this doesn't match the end semantic used by barebox (i.e. end contains
the last used address) adding one is necessary.
Without this change Linux fails for me to correctly extract a gzipped
cpio archive provided as initrd.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit:
2ccd451 ARM i.MX28: change default watchdog reset method
the external reset via the reset pin is broken. That commit overwrites the
HW_CLKCTRL_RESET register with only WDOG_POR_DISABLE set, which results in
disabling the external reset.
This patch uses read-modify-write to set the WDOG_POR_DISABLE, leaving the
WDOG_POR_DISABLE untouched.
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Due to some changes in the framework a resource size of zero does not map
anything at all and it does it silently.
Defining the resource size for the MCI interface make it work again on the
Chumby.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows init scripts to print messages to the console without messing
up the timeout prompt.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>