Memory layout can now be specified via kconfig options. Two
possibilities exist: default layout means the layout is stack
/ malloc heap / U-Boot. The user can also specify fixed addresses
for each TEXT_BASE / stack / malloc heap.
[Patch 16/17] U-Boot-V2:ARM:OMAP3: Add support for SDP3430 board file
This patch introduces support for SDP3430 board file.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 15/17] U-Boot-V2:ARM:OMAP3: Add support for SDP3430 support files
This patch introduces support for OMAP Boards common infrastructure.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 13/17] U-Boot-V2:ARM:OMAP3: Add generic Headers
This patch adds the generic OMAP headers and OMAP specific headers.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 12/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP3 Silicon files
This patch introduces support for OMAP3430 clocking infrastructure. Please note that SRAM based configuration requires GPMC values to be updated before returning to caller- TBD.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 11/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP3 Silicon files
This patch introduces support for OMAP3430 - provides for generic OMAP3 files.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 10/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP and Cortex A8
This patch adds support for OMAP3 platforms. Mainly to setup the infrastructure.
ARMV7 requires a different I/D cache cleanup code which is introduced in this patch
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 09/17] U-Boot-V2:Serial: Add support for NS16550 Driver.
This introduces support for NS16550 and related OMAP support. This driver is a port from Uboot v1 driver from OMAP's Uboot tree.
OMAP U-Boot V1 source is available here: http://linux.omap.com/pub/bootloader/3430sdp/u-boot-v1.tar.gz
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 08/17] U-Boot-V2:Commands Unbreak loadb support
This patch provides support for loadb and loady and enables the broken feature
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 07/17] U-Boot-V2:Common Make partitions configurable
Not all configurations of Uboot require partitions. This patch modifies partition compilation as configurable param
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 04/17] U-Boot-V2:ARM: Remove unwanted flags from Makefile
CFLAGS: "-D __ARM__" should have been "-D__ARM__". this breaks sparse check.
Further -nostdinc in Makefile is redfined by
commit ID:847934bc960ba1588c87e283118318dfdd78d4c0
This is unecessary as NOSTDINC_FLAGS defines it
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 03/17] U-Boot-V2:ARM: Fix lds file for multiple section enable.
By enabling -fdata-sections -ffunction-sections in arch/arm/Makefile, gcc splits the code into multiple section.
by using * wildcard we can bunch them into the areas we want them to be.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 02/17] U-Boot-V2: Handle case of clock rollover for get_time_ns
get_time_ns does a simplistic delta = cycle_now - cycle_last. It is possible that the h/w counter reached max and reset back to 0.
This patch addresses this issue by checking for rollover condition.
NOTE 1: This does not guarentee that you cannot confuse get_time_ns. You could possibly wait for two reset cycles and then get a messed up value.
To fix that we may need interrupt mode timer tick - something on the lines of jiffies on linux.
NOTE 2: the question of cs->mask is not clear. if the mask is for the tick, then it is better done with (cycle_now & cs->mask) - (cs->cycle_last & cs->mask).
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
Memory layout can now be specified via kconfig options. Two
possibilities exist: default layout means the layout is stack
/ malloc heap / U-Boot. The user can also specify fixed addresses
for each TEXT_BASE / stack / malloc heap.
Juergen Beisert
Marc Kleine-Budde
Sascha Hauer
Nishanth Menon