The current implementation fakes a memory-mapped I/O device
at 0x3f8 and 0x2f8, then uses platform read/write functions
to do the actual reading and writing. These platform functions
only exist for the x86 platform; better to move the I/O
routines into the driver and have the driver request I/O ports
using request_ioport_region.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add an environment partition and support commands so that the system
configuration can be permanent.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the Freescale P1022DS. Driver support is limited to:
- I2C
- Ethernet
- Serial
- NOR flash
- PIXIS FPGA
System clock configuration is read from the FPGA but has only been
tested using a 133MHz system clock and 100MHz DDR clock.
Boot arguments are defined in the environment to boot over NFS with
a console configured at 115200 bauds.
Enabling branch prediction is moved from board support to the platform
support for all boards as it is a CPU feature.
Some the code is from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A boot script is added to load DTB and Linux images for booting.
The init script starts the boot script after a 5s timeout window.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The UBI/UBIFS support is enabled and a script is added to attach
the UBI device and mount the UBIFS partition. This allows the loading
of firmware images from the NOR flash.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Updates to use a common linker script for all mpc85xx boards,
avoiding duplication.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pull the board device reset GPIO pin high as this prevents
PCI bus probing.
The function da923rc_board_init_r is called at the postcore
initcall level so that the udelay function can take advantage
of the core initialisation.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The chip select 0 (boot flash) registers are updated by the board
specific code as it is not done by the cpu early initialisation
any more.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit creates MDIO bus devices to separate the MDIO bus
abstraction from the Ethernet device initialisation.
It also updates the configuration of the P2020RDB ports.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without this patch after compiling barebox
for a PowerPC board we have 'git status'
output looking like this:
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# arch/ppc/boards/pcm030/barebox.lds
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add barebox-data section in arm branch to get complete
barebox regions in sdram regions tree.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for both i2c busses on the p2020rdb board is added and the
configuration file is updated to add the I2C driver and commands.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to use the IMX i2c driver on the mpc85xx SOC, the file mach/clocks.h
is renamed mach/clock.h. Files using this header are updated accordingly.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Minimal support of the Ethernet interface on the P2020RDB board. Only
the eTSEC3 interface is supported.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is limited board support for the Freescale P2020RDB in single CPU
mode. The DDR is configured for a memory bus running at 667Mhz.
The system boots from NOR flash and provides the console at 115200
bauds, no other drivers are included.
Finally, the PPC Kconfig and make file make the building of
the P2020RDB platform firmware possible.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The device resources are much smaller, the resource mechanism
revealed this because of overlapping devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
/dev/self0 and /dev/env0 are in the last MB of nor flash. The
offset depends on the size of the flash, so detect this at
runtime.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We introduced several new functions to ease our life
on ppc, use themn on the pcm030:
- setup iomux and bus clocks in board code
- add sdram memory according to detected size
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
we keep struct memory_platform_data for now on we will switch off the memories
resources to struct resource
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
before if you specify id = 0 the next available id will be taken
otherwise fail if already registered now as in linux we use -1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow each arch to handle the boards more simply and depending on
there need
the env var BOARD will refer to the current board dirent
for sandbox as we have only one board the board dirent is arch/sandbox/board
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Michel Stam
Renaud Barbier
Sascha Hauer
Antony Pavlov
Alexander Aring
Jean-Christophe PLAGNIOL-VILLARD
Alexander Shiyan