Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
we keep struct memory_platform_data for now on we will switch off the memories
resources to struct resource
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
We might want to add real resource tracking later. Also
The first resource may not be a IORESOURCE_MEM at all.
For these reasons introduce a wrapper function for
driver so that they do not have to fiddle with resources
directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
and add multi resource per device support
for now we keep the old map_base and size temporary but will switch all of
the used step by step to them resource way
and mirror the first resource to the map_base and size if available
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
convert enable_interrupts() and disable_interrupts() to static inline
if no IRQ supoprt enable
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
256k(barebox)ro,128k(bareboxenv),1536k(kernel),-(root)
so we will match the erase block size
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix an error when bootm support is not choosen during
the configuration.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If the device setup executed by the spi master fails,
unregister the created device.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
During the creation of a new spi device, we need to
have the possiblility to give the bits_per_word value
to master->setup.
As a matter of fact, spi master could check the spi
device bits_per_word and compare this value against its
capabilities.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add missing EXPORT_SYMBOL for nan static function
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
it's part of the command and can not be compiled as an other module
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add missing EXPORT_SYMBOL for nan static function
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current version of struct stat has been taken from an
ancient Linux Kernel. It looks different on different architectures
to support different userspace formats of struct stat. As we do
not have a userspace on barebox there is no need to keep different
versions.
Also, this unification make MIPS arch possible.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When the bus_width was set to 8, then only one data-line has been initialized.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds support for most spi eeproms, such as the
Atmel at25 models.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds the following spi transfer functions:
- spi_write
- spi_read
- spi_write_then_read
- spi_w8r8
The code has been ported from the linux kernel.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the spi layer this pointer will be assigned to the
platform_data pointer of the new spi device, thus it can
be accessed in the drivers 'probe' handler.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MLO is to big (>40000) to save Space disable CONFIG_FS_RAMFS and
CONFIG_FS_DEVFS in defconfig
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If we are using barebox on a NiosII/e variant, the
mul instruction is not supported and causes an exception.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jean-Christophe PLAGNIOL-VILLARD
Antony Pavlov
Franck Jullien
Hubert Feurstein
Carlo Caione
Marc Kleine-Budde
Jan Weitzel