Did the following:
* Added the devtool upgrade flow to the SDK manual.
* Removed the devtool Quick Reference from the dev-manual and
added it as a new chapter to the ref-manual.
* Made sure all the links and cross-references work now with the
moved material.
* Updated the Make file so that the manual set builds correctly
regarding the new chapter in the ref-manual.
* Created cross-referencing notes in both the sdk-manual and the
dev-manual to the newly located devtool Quick Reference chapter.
(From yocto-docs rev: fda0bf68b3654b1b96407d552c5254657465b5fc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I needed a new figure and a new section.
(From yocto-docs rev: d413ca7b9b946450af7c2c15ab0e68e9181517e9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These notes can't be in the final version of the manual.
Now is the time to get them out.
(From yocto-docs rev: 600b4f2c7360b30d12fdc7ed0f5ba41bc09fc778)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10032]
The fix to remove the BitBake Commander from the tools to install
when dealing with the Eclipse Yocto Plug-in has happened.
Consequently, I removed the developer notes in the manual stating
that the Commander was still showing up there. The manual set
is now clean of this stuff.
(From yocto-docs rev: fbe169b086faac571de8a2ebd9d32682162cfd31)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10267]
The example works better using OECORE_TARGET_SYSROOT for the
aclocal line. I changed it to that.
(From yocto-docs rev: 362b786e7bf2083c5809e961f61c0ad81b778d71)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new command devtool finish has superceded the final commands
in the SDK workflow. I updated the two figures (add and modify)
to reflect this new flow. I also updated the ordered number list
to match reality.
(From yocto-docs rev: 0ba31e730cd748d06eab8d46b38764cda5c4e3bd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new variable description for SDK_INCLUDE_TOOLCHAIN.
Along with the new glossary entry, I updated a couple places
where it would be relevant to cross-reference the new variable.
(From yocto-docs rev: df99b097595e7488a93354082b8d9f33acd9c229)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided clearer instruction on how to set up a new SSH
connection when deploying an application to QEMU.
(From yocto-docs rev: 93adc542a40e86377380684e1ce294edd0fd7268)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10183]
Added a new variable entry for the PACKAGECONFIG_CONFARGS variable.
With the introduction of the new PACKAGECONFIG_CONFARGS variable,
many places in the mainstream YP documentation that referenced
how to pass configure arguments using EXTRA_OECONF needed to also
make mention of this new variable. I added many cross-references
to the new variable.
(From yocto-docs rev: 00f02d45319bab90b72eab89fcb69cbe8bd05bb5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7546]
Applied changes throughout this section to move it from Luna to
the Neon version (latest) of Eclipse. We now provide a single
thread for Eclipse, which is based on the latest version (Neon).
Information for Mars, which is also supported) is in a new Appendix
C.
(From yocto-docs rev: 82995d9c49e4c55707591a1375c5d86874c589b0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the Bitbake commander item and renamed the ADT one to SDK.
(From yocto-docs rev: 7bb7823bd9991ce95315b76bdfb3175c53198401)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed a note in step 4 of the "Workflow Using Eclipse(tm)"
section that an alternative method to getting the target
root filesystem and toolchain is to build them out.
Referenced the wiki.
(From yocto-docs rev: 60720be0fe0d29a0b695005bb40f5b0c25475b55)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dumped a link to pre-built kernel naming information. The
link was to the sdk-manual, which made no sense.
(From yocto-docs rev: 9b7a9f8217d9251f2d7166afc0bb3b4235264201)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7546]
First draft of the new appendix supporting the Mars version
of eclipse. New appendix file created and entry made to
the sdk-manual.xml file to include that new appendix file
into the main book.
(From yocto-docs rev: 2fb79c29bcbb5c0801f67d4c245c07c3aa9d2ca2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
sdk-manual: WIP on appendix C
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file was named 'configure.in' and was slightly different than
what it needed to be in order to work. The file needs to be named
'configure.ac' and have slightly different contents. Fixed both.
(From yocto-docs rev: 1b80e90848d23737462f8b0e55b2ff604f9abf41)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updated poky.ent to have the appropriate 2.2 variables
* Updated all manual revision tables to have a new entry for
2.2 - used "Sometime in 2016" for the date.
* Updated the mega-manual.sed file to process internal links
for 2.2.
(From yocto-docs rev: 2acd49ee197e3e3e725f4cb8cc432437afd8646b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates included minor items for wordings and clarity. Review
comments from David Kinder, Stephen Ballard, and Paul Eggleton.
(From yocto-docs rev: b25e5cab60f9c1e059fadd844a3a75d9df450ebf)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needs to used the downloadable XSL files and not the static
local 1.76.1 versions.
(From yocto-docs rev: 1dfc6081ffb745e424ff5f73c708e2559466831e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file was still using the 1.76.1 XSL style sheets. They need
to use the downloadable ones.
(From yocto-docs rev: 27e29bedb2d1c080a23298fc0ae23054c40971aa)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of a DISTRO_NAME_NO_CAP variable, the occurrences
of the DISTRO_NAME variable had to be checked to see if they really
should be using the "NO_CAP" variable instead. Output and actual
branch names are case-sensitive.
(From yocto-docs rev: 711a3255538298dd3c4bd2af8ad13bc2d159c872)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to "April 2016" for all manuals that use this table.
(From yocto-docs rev: 4d3753cc92c446668b0c383736c2071e24e53dd2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I handled the occurrences of "oprofile" and "tools-profile" throughout
as I could. They are not all done yet. These in this commit have
been removed.
(From yocto-docs rev: d76e264ea210846ad8080134bacd56462ba69d24)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the following note in the section that deals with running
Eclipse with a remote application.
Fixes [YOCTO #9276]
Currently, Eclipse does not support SSH port forwarding.
Consequently, if you need to run or debug a remote
application using the host display, you must create a
tunneling connection from outside Eclipse and keep
that connection alive during your work.
For example, in a new terminal, run the following:
ssh -XY user_name@remote_host_ip
After running the command, add the command to be executed
in Eclipse's run configuration before the application
as follows:
export DISPLAY=:10.0
(From yocto-docs rev: 7bf2875ff1653a8e50fa8e2bba540b2eb2512d2d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the heading for "Optionally Building a Toolchain
Installer" to "Building an SDK Installer". This changes the
heading and many references to that heading.
(From yocto-docs rev: 97d8cd34d0dd0993b1b1135bb75f2212bb46878a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark